Everything You Need To Know About The Neptune 3 Plus 3D Printer 🔥
Вставка
- Опубліковано 30 чер 2024
- Review of the Neptune 3 Plus 3D Printer from unboxing, to tuning to printing PLA and TPU. 3D printer: www.elegoo.com/en-ca/products...
My PrusaSlicer profiles for the Neptune 3 Plus: www.patreon.com/posts/elegoo-...
Neptune 3 Plus on Amazon (soon) amzn.to/3Zfo7xG
Join the Patreon Squad! mkme.org/Patreon
Specs:
【Dual-Gear Direct Extruder】The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.
【Larger Print Volume】The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.
【Auto Bed Leveling】ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first layer print.
【PEI Magnetic Platform】PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.
【Z-axis Dual Lead Screw】The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB.
【Removable Capacitive Touchscreen】The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.
ELEGOO Neptune 3 Plus FDM 3D Printer with 49-Point Auto Bed Leveling, Dual-Gear Direct Extruder, Ultra-Quiet Printing, Removable Capacitive Screen, Larger Printing Size of 320x320x400 mm / 12.59x12.59x15.74 Inches
------------------------------------------------------
➡️Gear to Buy ⬅️
Buy one of my project kits HERE! ➢ store.mkme.org/?product_cat=c...
ALL the gear I use in these videos ➢ mkme.org/Gear
Shop Amazon US ➢ mkme.org/AmazonUS
Shop Amazon CAN ➢mkme.org/AmazonCA
Shop Amazon UK ➢ mkme.org/AmazonUK
Shop eBay ➢ mkme.org/ebay
Shop my MKME.org Store ➢ store.mkme.org
Shop Bangood ➢ mkme.org/banggood
Grab a cool Maker T-Shirt ➢ mkme.org/merch
------------------------------------------------------
➡️I have MORE UA-cam Channels you need to subscribe! ⬅️
MKME LAB ➢ / mkmeorg
MKME Media ➢ / @mkmemedia
MKME Outdoors ➢ / @offgridadventurer
MKME TV ➢ / @mkmetv
-----------------------------------------------------
➡️Learning and News ⬅️
Daily maker/electronics news! ➢ news.mkme.org
Learn to make these projects ➢ learn.mkme.org
Make money from your hobbies ➢ mkmemedia.com
------------------------------------------------------
➡️Get Social with Me ⬅️
Join the MKME Discord live chat here ➢ / discord
MKME Forum ➢ forum.mkme.org
Reddit ➢ r/mkme
Twitter ➢ / mkmeorg
Instagram ➢ / mkmeorg
Facebook ➢ / ericwilliam13
-----------------------------------------------------
➡️My Websites and Related ⬅️
Main Site ➢ mkme.org
Blog ➢ blog.mkme.org
MKME Facebook Page ➢ goo.gl/aXg29
Odysee ➢ odysee.com/@mkmeorg
Mail:
MKME Lab
PO Box 493
Goderich Ontario Canada
N7A 4C7
-----------------------------------------------------
Want to learn how to do what I do? Go here skillshare.eqcm.net/gb0PMr
Sweet Tunes from Epidemic Sounds: share.epidemicsound.com/o6sg9x
Thanks for Subscribing!
0:00 Intro
00:36 Unboxing
01:41 Assembly
02:20 Tips & Tricks
02:46 Bed Levelling
03:28 Printing Results with Provided PLA and Gcode
05:50 LED Lighting
06:18 PLA printing with my PrusaSlicer profiles
09:35 TPU printing with my PrusaSlicer profiles
10:24 Noise measurements dB
11:40 Large prints in Spiral Vase Mode
12:30 Conclusions - Наука та технологія
I ordered this printer earlier this week. Can't wait to receive it and start printing.
Where at? Everywhere I look it's out of stock.
@@learnbydoingdiy I was able to order from the Elegoo website on 01/03.
@@YourMomsBoyfriend69 Crazy, I saw pro's available but not plus, I was casually refreshing the page every day. They sure go out of stock fast.
They do but after using this for many weeks 24/7 now- I expect them to be popular. It is really good.
Hello. I printed the same thing in the 4 corners of the bed, and only 2 of them were sucefull, the other 2 didn't sticked well. This could be for a bad nivelation? Or is that part of the bed that always have a bad stick level?
Nice work!
Thanks!
Awesome video! Waiting for my N3+ (first printer ever) to be delivered later this month. I am interested in your Prusa profile. Have you upgraded or tweaked it in any way since this video?
Just got mine! Hope you have fun with it!
I can see from your last few reviews that 3D printers are finally getting to the point that a "normal" person could set one up and get a successful first print.
Indeed. They are finally at that point.
Do noise readings make sense if the distance between the meter and the source is not known? I think it's commonly specified at 1 m. Tanks for sharing!
Solid point. Coincidentally this was nearly bang on 1m but I should note it and measure maybe. Hmm
3:09 that tip. What does that mean? I’m new and boutta get it today.
Outstanding. I've got the Ender 5+ but thinking about a Prusa for my "special" stuff. I wonder why they don't include Auto bed leveling.
For so many years I never had it at all (until 2022 actually) Now I dont want to ever go back. Always having a perfect first layer no matter what has spoiled me. I laugh every time when I check just to see if its got that perfect little roundness to the sides and flat top- every time they do :)
Hey :)
Can i User prusaslicer on the en3p?
Hi! Is it better than creality cr10v3?
Do you have to level it before you use it every time?
This might be a bit late, but no!
How to send a file
What Slicer are you using?
Prusaslicer
@@MkmeOrg What profile, because I can not find neptune 3 plus.
@@paizonryker7101 I had to make it. Link is in the description
@@MkmeOrg your awesome gained a subscriber, is it locked only available to patrons??