Co-z gate opener install 8-28-20

Поділитися
Вставка
  • Опубліковано 18 січ 2025

КОМЕНТАРІ • 20

  • @AJG1227
    @AJG1227 Рік тому +1

    Is it still working well?

    • @champion18bass51
      @champion18bass51 Рік тому

      Yes it is still working great! Happy with it.thanks for watching.

  • @84848AR
    @84848AR Рік тому

    How do I set the auto close after its been open?

  • @melissadavis9527
    @melissadavis9527 2 роки тому

    Would like to know about programming the remote.

    • @champion18bass51
      @champion18bass51 2 роки тому

      There is a learn button in the control area, push that then the button on the remote until it's activated.

  • @joseaparicio4943
    @joseaparicio4943 2 роки тому +1

    Hi does the back sensor Detect the top or bottom magenet

    • @champion18bass51
      @champion18bass51 2 роки тому

      Hi thanks for asking great question. In my situation the bottom magnet is the one when the gate is fully closed the top magnet stops the gate when it is fully open.

  • @virgilsalazar7479
    @virgilsalazar7479 3 роки тому

    thank You , I will double check that !

  • @captaingreatvalue
    @captaingreatvalue 2 роки тому

    Hello just bought this unit… can you tell me if the power cable came with the unit and what other tools are needed for installation thank you

    • @champion18bass51
      @champion18bass51 2 роки тому +1

      No power cable comes with it, you can hook up you own or just hard wire it in. Lots of tools

    • @captaingreatvalue
      @captaingreatvalue 2 роки тому

      @@champion18bass51 hey thank you I was able to cut a thick extension cord according to a friend of mine who is a master electrician and problem solved my gate was not made for gate openers so a lot of jankyness had to be done to make it work I posted a video of you want to see the results lol 😂

  • @ferndogg4427
    @ferndogg4427 4 роки тому +1

    How do you program visor remotes

    • @mattalexander54
      @mattalexander54  4 роки тому +1

      I'm not sure what you mean about visor remotes but there is a learn button on the circuit board that you use on each remote to be programed.

  • @randallbrown6239
    @randallbrown6239 3 роки тому

    Do you see any problems developing in an ice and snow area? Winters here in Southern Ohio can get a bit brutal at times.

    • @mattalexander54
      @mattalexander54  3 роки тому

      I could see how deep snow or ice could affect it, mine has worked great for almost a year best thing I've done.

  • @virgilsalazar7479
    @virgilsalazar7479 3 роки тому

    I installed two motors one in front and back of the hse (100’) synced two remotes to each motor why do both gates work at the same time

  • @NDSTraveller
    @NDSTraveller 4 роки тому

    But is it rioter proof?

    • @mattalexander54
      @mattalexander54  4 роки тому +3

      prob not, but i have other options for that.

    • @NDSTraveller
      @NDSTraveller 4 роки тому

      @@mattalexander54 You and me both bro... :-)