CHEAP Sliding GATE opener Installation and set up Tips
Вставка
- Опубліковано 4 жов 2024
- Tips for Vevor, co-z and several other china brand name sliding gate openers. I have had this opener for a few years and has been good for the money. Note my gate is 30 foot long, homemade and pretty heavy.
www.ebay.com/i...
This is where i bought the opener I am not associated with this company shop around for deals. The added button I used a.co/d/8Sjhj0N
Really cool video. Do you have a video on your gate specifically? I have a similar setup and have been looking at ways to automate it without using a track across my driveway. Looks like you solved that.
I don’t have a video on it but I just made some wheels from old idler pulleys off of engines you can buy legit gate pulleys but they are pretty pricey
Great video! thank you!
Your welcome I hope it helps
Respectfully you is fine
Thanks!
very informative video.
Thanks!
did you try with wifi switch? do you know if its possible to put a switch inside this motor and then operator it via phone app? Also if the answer is yes, can it work with any wifi connection or does it have to be 2.4 ghz wifi connection only? I know that most wifi switches wont work with over 2.4 ghz wifi connection
Vevor has another opener that looks just like this one that does have the Wi-Fi control built in so you can use your phone. It cost more so I didn’t buy it so I don’t have any experience with one
Do you have a link for the button
a.co/d/8Sjhj0N. Actually bought these for another project but working great for this to
Hello I lost my wiring diagram. Can you scan your copy and place it somewhere for download? Thank you.
I will look later today and try to scan it will let you know either way
I’m really sorry i must have lost my diagram as well if I happen to find it I will link a picture in the description
hi, thanks for the great video can you tell me if there is a possibility to install a light signal when opening and closing the gate?
I just checked voltages on the board I didn’t find anything suitable to run a light while the gate is moving thats a really good idea though i would like that myself
@@simplytinkerdad there is a connector to place light signal
Im having trouble with closing the gate is there a way to reset the gate? It was working just fine the other day I didn't change move anything
There is no reset might try pulling the cover and hitting the cycle switch if nothing happens try pulling the release lever and sliding the gate manually an make sure it isn’t binding
How to open the lever because it's jam and it's stock
I think if there is tension on the chain it will be hard to pull the lever maybe disconnect the chain
What strength magnets did you add? I have some 15 lb magnets.
These where 18 lb so pretty much the same
What is better in your opinion? Rail version or chain version of this fence? I have possibility for both. But I am unsure what to pick. Thanks.
I think the chain version would be best for the most part because it is very easy to set up and maintain. The rail one is probably good too just my opinion
@@simplytinkerdad About remote control... It has 4 buttons. What functions does they have? Button1 is probably for opening? 2-nd one for closing? And those 2 buttons remaining?
Buttons 1 and 2 for opening and closing one button is for stop the other is for continue. The remote rang is pretty far the only thing I dislike about the opener is its not very fast
@@simplytinkerdad So this is 370W version? I don't know if 550 or 750W would be any faster? I think that speed would remain same due to gear ratio. In other words it probably has to be slow.