So instead of wiring up switches and cutting holes into the shell. You can actually wire them up to the controller buttons themselves! I have my Defender Arcade machine set to where I can hold up to have it play Pacman. Hold down for Ms Pacman. Hold Left for Galaxian. Hold Right for Defender. It keeps the shell looking great and you dont even have to cut shells or anything. Its a great way to do it hidden
Good eye! I use that trick on my Arcade games to give me credits when I push the p2 start button. It didn't occur to me to try it with this handheld. I was thinking he'd use jumpers or something.
@@HackerBilly13 i wonder if the code on these things has been patched to prevent that mod. if i hold down any button while powering it on, the game will not power on until after i release the button. that's stock behavior. i connected the game selection pads to the buttons and tried it anyways, but it always boots to the game that's selected when no resistors are present. i'm not sure this mod will work with the micro arcade i have.
@@Ruthsarian It should work the same way the switches do? Thats odd. I wired each button to the corresponding resistor area. Just like the 4 switches except to each of the directional pads. Granted I do have one of the first ones
ordered one of these, plan to test mercury switches in it, if tilt it in different directions before powering on will select different games , update wen i try this out , waiting for it to come
Very intersting discovery. Not sure if youve heard, however, ive been told that on the new verson of the totes/launch talkimg pedometer, there is a certain pin on the PCB, which, when shorted, reveals a hidden pace melody mode glitch/easter egg, and was curious, if one day you could by chance get one to investigate, as Id be interested to discover if the melodies are the same 7 from the older units from the early 00s, or a different set. If you cant i understand, but hopefully one day someone on UA-cam could. Thanks.
Great video! I have a few of the keychains that I use as ornaments. Is there room to mount the selector dip switches elsewhere? I'd want them to be less noticeable, if I decide to mod mine. I started looking at the micro arcades on amazon during the video, and sure enough, there's several versions, and Q-bert is one of them. I might grab a few to mod and hand to my kids on trips. I do wish q-bert had its dpad rotated 45 degrees, though.
i recall the sides of the body had the most space available to fit a 4-position dip switch. maybe using individual switches could let you place them in more discrete locations.
I have one of the small card Tetris games, as well as the mini cabinet one like the ones you have here. The card one is dated to 2019 on the battery, and the cabinet says 2018 on it. Unfortunately I don't seem to be able to get any other games working on it by bridging the contacts on either of the consoles. Both of them don't have any 0 ohm resistors in place either. Do you know when yours were made? I wonder if they fixed this particular issue around this time. I tried the multiple position trick as well, but didn't have any luck with that, but it could be because of not bridging them right.
I just got the Oregon trail micro arcade the picture on the box shows the for pads with no resistor but the actual device I got the pads aren't there there are some pads underneath the a button but they don't seem to do anything when I jump them. Any help?
What if you try multiple combinations of shorted pads? With 4 pad positions, there are 16 possible combinations of shorted or open connections. It's possible that the pad positions are connected to address lines for the memory and may map to more games.
i kept the stock piezo speaker. a larger speaker wouldn't fit inside the case and it gets in the way of where you position your fingers if you mount one on the outside.
Just opened the space invader one. It has pac man, ms pac man, galaxians and space invaders. I put a switch on so I could switch between space invaders and Galaxians but the sound is now really quiet. Anyone know how to resolve this?
sounds like there will be two copies of each game. one with sounds designed for the type of speaker in your device and one with sounds designed for a different type of speaker. you've found the version designed for the other speaker. keep playing with the switch settings and you should find one with sounds that work with the speaker you have
Wonderful video!! I bought a tetris micro arcade to do the mod and I bought the Pacman micro arcade (same model as the tetris) but for I see on the Pacman game doesn't have any resistor, does anybody knows if it has another games? I tried to make some connections as your video but not lucky :/
just so happens that i picked up a pac man micro arcade a couple months back to hack as well. pac man has 4 games on it, not two. to select different games you have to connect two pairs of pads, not one pair. with no pads connected you get pac man. the hack is a little more complicated with the pac man mini arcade, but it is possible. i ended up using a 4 position dip switch (www.amazon.com/dp/B07LBMC9HV/) glued to the back and ran some thin, enameled wire from those pads to the dip switches.
@@Ruthsarian no luck with the pacman :( I made the suggrested mode to the pac manone and there is no other game inside, maybe they changed the configuration to prevent it
@@MikeXfm I just grabbed a Tetris micro arcade as a prize from Dave and Busters last week…unfortunately it only has a single resistor in the area where these pads normally are so it looks like they’ve revised the boards. Part of me wonders if the traces are still under there but I’m not about to destroy my Tetris to find out. Edit: just realized the resistor is in a different place entirely, directly below the bottom right leg of the power switch.
So instead of wiring up switches and cutting holes into the shell. You can actually wire them up to the controller buttons themselves!
I have my Defender Arcade machine set to where I can hold up to have it play Pacman. Hold down for Ms Pacman. Hold Left for Galaxian. Hold Right for Defender.
It keeps the shell looking great and you dont even have to cut shells or anything.
Its a great way to do it hidden
Good eye! I use that trick on my Arcade games to give me credits when I push the p2 start button. It didn't occur to me to try it with this handheld. I was thinking he'd use jumpers or something.
I wish I had thought of that! I've ordered another one just to try that mod.
@@Ruthsarian Cant wait! Its definitely my favorite way to do it!
@@HackerBilly13 i wonder if the code on these things has been patched to prevent that mod. if i hold down any button while powering it on, the game will not power on until after i release the button. that's stock behavior. i connected the game selection pads to the buttons and tried it anyways, but it always boots to the game that's selected when no resistors are present.
i'm not sure this mod will work with the micro arcade i have.
@@Ruthsarian It should work the same way the switches do? Thats odd.
I wired each button to the corresponding resistor area.
Just like the 4 switches except to each of the directional pads.
Granted I do have one of the first ones
You never cease to amaze me! Well done, again!
ordered one of these, plan to test mercury switches in it, if tilt it in different directions before powering on will select different games , update wen i try this out , waiting for it to come
That’s actually a brilliant idea. Where can I get tiny mercury switches?
Super knowledgeable. Wow . The way you reverse engineer is amazing.
Anybody know which (if any) extra games The Oregon Trail edition has? Considering hacking mine...
Very intersting discovery. Not sure if youve heard, however, ive been told that on the new verson of the totes/launch talkimg pedometer, there is a certain pin on the PCB, which, when shorted, reveals a hidden pace melody mode glitch/easter egg, and was curious, if one day you could by chance get one to investigate, as Id be interested to discover if the melodies are the same 7 from the older units from the early 00s, or a different set. If you cant i understand, but hopefully one day someone on UA-cam could. Thanks.
Great video!
I have a few of the keychains that I use as ornaments. Is there room to mount the selector dip switches elsewhere? I'd want them to be less noticeable, if I decide to mod mine.
I started looking at the micro arcades on amazon during the video, and sure enough, there's several versions, and Q-bert is one of them. I might grab a few to mod and hand to my kids on trips. I do wish q-bert had its dpad rotated 45 degrees, though.
i recall the sides of the body had the most space available to fit a 4-position dip switch. maybe using individual switches could let you place them in more discrete locations.
next hack doom onto it
I have one of the small card Tetris games, as well as the mini cabinet one like the ones you have here. The card one is dated to 2019 on the battery, and the cabinet says 2018 on it. Unfortunately I don't seem to be able to get any other games working on it by bridging the contacts on either of the consoles. Both of them don't have any 0 ohm resistors in place either. Do you know when yours were made? I wonder if they fixed this particular issue around this time. I tried the multiple position trick as well, but didn't have any luck with that, but it could be because of not bridging them right.
I just got the Oregon trail micro arcade the picture on the box shows the for pads with no resistor but the actual device I got the pads aren't there there are some pads underneath the a button but they don't seem to do anything when I jump them. Any help?
Awesome mod
What if you try multiple combinations of shorted pads? With 4 pad positions, there are 16 possible combinations of shorted or open connections.
It's possible that the pad positions are connected to address lines for the memory and may map to more games.
if any more than one connection is made at a time the game just displays a blank screen. i had tested that, but left it out of the video.
spoiler: the pac-man one DOES have more than 2 games on it and it DOES operate off multiple combinations of positions.
@@Ruthsarian I picked up a breakout asteroids and pong one recently and was wondering if you know what other games may be on it?
What speaker did you end up using????
i kept the stock piezo speaker. a larger speaker wouldn't fit inside the case and it gets in the way of where you position your fingers if you mount one on the outside.
Hello! Does anyone know what other games Ms. PacMan mini arcade has? Mine has 2 of those zero resistors.
Could you have wired it to the volume on off switch?, and when you turn it on, you could choose what one ya want?
i have broke display on mine... does anyone know what display it is and where I can get it?
perhaps it would be possible to add a headphone jack to use with the other versions.
There are more games than the two on the flash. You for example if you put two resistors on the points you get pacman
Just opened the space invader one. It has pac man, ms pac man, galaxians and space invaders. I put a switch on so I could switch between space invaders and Galaxians but the sound is now really quiet. Anyone know how to resolve this?
sounds like there will be two copies of each game. one with sounds designed for the type of speaker in your device and one with sounds designed for a different type of speaker. you've found the version designed for the other speaker. keep playing with the switch settings and you should find one with sounds that work with the speaker you have
Wonderful video!! I bought a tetris micro arcade to do the mod and I bought the Pacman micro arcade (same model as the tetris) but for I see on the Pacman game doesn't have any resistor, does anybody knows if it has another games? I tried to make some connections as your video but not lucky :/
just so happens that i picked up a pac man micro arcade a couple months back to hack as well.
pac man has 4 games on it, not two. to select different games you have to connect two pairs of pads, not one pair. with no pads connected you get pac man.
the hack is a little more complicated with the pac man mini arcade, but it is possible.
i ended up using a 4 position dip switch (www.amazon.com/dp/B07LBMC9HV/) glued to the back and ran some thin, enameled wire from those pads to the dip switches.
@@Ruthsarian You are a wizard!! I will try that mod with the dip switch, thank you so much for your help!!
@@Ruthsarian no luck with the pacman :( I made the suggrested mode to the pac manone and there is no other game inside, maybe they changed the configuration to prevent it
@@MikeXfm I just grabbed a Tetris micro arcade as a prize from Dave and Busters last week…unfortunately it only has a single resistor in the area where these pads normally are so it looks like they’ve revised the boards. Part of me wonders if the traces are still under there but I’m not about to destroy my Tetris to find out.
Edit: just realized the resistor is in a different place entirely, directly below the bottom right leg of the power switch.
you should try the organ trail one
ANOTHER GREAT DYI ONE CAN DO THANKS
Can you find hidden games on milipede micro arcade
I had one of these and I completely destroyed it. (battery, screen, etc)
Gracias 😊 excelente hack 👌
I am gonna try this
Yay!
A speaker from an iPhone would easily fit in there.
i was going to do this but they patched it :(
Unskippable ads has earned your video a thumbs down and a report for spam. This will be continued for ALL future videos.
Wut
Hes gotta make money somehow
Umm.. I just got a skip ad???