Avoid Costly Mistakes: How to Replace Ford Focus MK2 Front Shocks
Вставка
- Опубліковано 25 сер 2023
- In this video, I'll be replacing the front shock absorbers of my Ford Focus MK2. This procedure is also similar to Volvo S40, V50, C30 and Mazda 2
#ford #fordfocus #fordfocus2
Help this channel with a donation on the following link:
www.buymeacoffee.com/Gentilsg...
I am also on Instagram, Threads, Facebook, Twitter and email where you can also contact me:
Instagram:
/ gentilsgarage
Threads:
www.threads.net/@gentil79
Facebook:
/ gentilsgarage
Twitter:
/ gentilsgarage
Email:
Gentilsgarage@gmail.com - Авто та транспорт
Nicely detailed video, that will help out those who need to change their front shock absorbers. Thank you for posting.
Thank you very much
Thank mate incredibly good explanation
Glad it helped
Good video!
Thank you
Love this man's videos helped me out so much with my focus RS everting was the same thanks mate keep up the good work and videos u help alot 🎉
Thank you very much
Great video always been reluctant to do this but your video is of great help thanks
Thanks, hope it helps.
First Class video, and content Gentil.☺
Thank you!
What a great detailed video Thank you for sharing
Glad you enjoyed it!
Great video. Well explained and well filmed. This has helped me massively.
Thank you very much, I’m glad it helped
Well done, Gentil. 👌🏼😀
Thank you!
Muito legal. Vou fazer o mesmo no meu Focus. Parabéns 👏🏽
De nada, espero que o vídeo tenha ajudado.
The bottem is fine but when I installed the new shock and top mount the top was knocking badly but when I put my old top month hat on it stop knocking
Can tap the hub up to put the shockie in the hub
It’s a bit harder I think. What I’ve done is similar to Ford, except easier as it’s done on a lift.
Hi mate. So the top bolt for the strut is an 18mm?
Hi, yes that’s correct.
Please i need help with my MK2 1.6 2011 model. The information cluster screen light remains on even when the vehicle is switched off and locked. How do i turn the information screen off when not in use.
It’s stays on for a few minutes. It’s perfectly normal and mine does the same as well
Does a mk3 focus shockie fit a mk2 focus
Not sure. Damping rates might be different and mounts look slightly different too
lucky to get that 15mm lower shock bolt out. mine is stuck fast and now rounded :(
damn :( only solution is to try and hammer in a slightly smaller impact socket and undo it with plenty of heat and penetrating fluid. Or, weld a nut on it
@@GentilsGarage i was in a time crunch to change the spring for mot so i just undid the track rod and lower ball joint (replaced recently so they came apart) and the top of the strut. it gives just enough room to change spring and top mount. i will replace the whole hub when i replace the shocks. they are cheap enough :)
@@FordForTheWin that's a good alternative
Hi I put brand new shock and top months on my focus and put back on car took it for test spin and the knocking from the top was so bad but when I put back on the old top hat with the new bearing it when is there two types off top months for the old and new focus mine is 2009 can u tell me please thanks
That’s strange as I’ve only seen one type of top mount.
One cause of the top mount k ouch is when the bearing doesn’t sit properly in the top of the spring. For that the notch on the bearing must line up with the guide pin at the bottom of the strut.
@@GentilsGarage I lined everything up perfect but when I put the new top on it knocked badley it was like the meatel on the top wasn't high enough like the old one was siting high
@@kevingoldbey7401 That’s strange. Never heard of that before. The only way to see why this is happening is to compare them side by side and measure them.
@@GentilsGarage I did the we're the the same all around but when I looked at the old and the new top hat the middle was different the old one had more sticking out the the new one
@@kevingoldbey7401 ok, and the new ones are same brand as mine, Sachs?
No the ones I got are called napa and the shocks are called napa too
Ok, have a look at the pinned comment. One of my viewers had issues with Napa shocks and mounts, so you’re probably having the same issues.
@@GentilsGarage ya I say that's what it is so but once I put back the old top mount hat it was better but I keeped the new bearing bottom part just changed the hat I never buy napa parts again