How to Replace Front Strut Assembly 00-05 Ford Focus
Вставка
- Опубліковано 4 жов 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/64/cj...
1A Auto shows you how to repair, install , fix, change or replace your front shocks with their loaded struts. This video is applicable to the 00, 01, 02, 03, 04, 05, Ford Focus.
🔧 List of tools used:
• Pry Bar 1aau.to/odX/1AX...
• 13mm Socket 1aau.to/oFg/1AX...
• 15mm Socket 1aau.to/oFg/1AX...
• 19mm Socket 1aau.to/ojg/1AX...
• 32mm Socket 1aau.to/oA/1AAS...
• Locking Pliers 1aau.to/oao/1AX...
• Ratchet 1aau.to/oNf/1AX...
• Torque Wrench 1aau.to/omM/1AX...
• Anti-Seize Grease
• Rust Penetrant
• Hammer 1aau.to/ofY/1AX...
For More Info visit us at 1aau.to/h/bKX/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Do you sell 3m lubricant for brake system. example like trade locker, silicon paste and anti seize?
Watch video
Same comment as below, but because of your video, my son and I changed both out in time for my wife to attend an event she really wanted to go to so thanks for making the video. It made a real difference for my family and I.
Something you should mention, is that you can actually rotate the strut assembly once you have it screwed in at the top. I thought for a solid hour that I did something wrong because the strut wouldn't line up with the knuckle. Found out through forum that you can actually rotate it once it's on the top mount. Otherwise, this was awesome
this is about the 8th 1A auto video I've seen.. and YOU GUYS ARE THE BEST!!!.. smart technicians, very personable and knowledgeable!! THANK YOU for all your videos....
If you go behind the knuckle and tap a spreader into the back to the strut it comes out very easy you just have to tighten it good afterwards
On my 2005 ZX4 ST that's lived 16 year in CA I didn't have to undo the axle nut. I just put a short (~16") 2"x4" on the knuckle and hit the end of it with a sledge. Worked like a charm! Great video.
Yeah for sure in a non salted road state these cars fair much better. Never had such a time doing any suspension on mine.
Just want to say I watched your video and love the way you do your job but it is sad to say not most mechanics are that careful or good keep up the good work always remember your work has your name on it lots of blessings
Wish you guys would put torque specs in your videos
Check autodoc
5:00 Keeping the rotor tight against the hub is a good precaution because I had that very issue where rust flakes got in behind the rotor and caused run out because they acted like a shim.
Awesome video and thanks for making it and sharing it, I have to change the front struts on my 2008 focus, this saved me time and money on taking it to a garage and paying $3500 for them to do it. Thanks a bunch again.
anyone who charges 3500 to replace a 150$ set of parts and about an hour of labor is ripping you off you should find a different shop to go to
3500!?!?! Nah dont ever go back to that shop
17:40 going around a second time doesn't do anything unless you're not sure if you missed torquing one completely the first time around, because static friction will always sound off or click without any motion of the nut.
To do anything like that it needs to be first loosened up again so that it rotates during the tightening process.
The knuckle is stuck and won’t allow my new strut to go in how do I fix that I’ve greased both things and jacked it up it lifts the damn car up
Beautiful fender… zooms in
Great informative video👍
Thank you.
I know this is an old video, but will this also work on a 2012 Ford Focus?
What a wonderful channel
Thank you for the video, I wish you could put my struts on my Focus 😊
+Joy Garvin Thanks for checking us out, glad you enjoyed the video! 1aau.to/m/Shop-1AAuto-c
on the air chisel your using what is the one you are using, i found a cheap one on 1a auto 29.00 but I am not sure if they have a better one, they do not say,
You Guys have such Great Vids.
I’ve got a 2005. Guy I bought it from dropped it, lower ride. I want it back to standard/OEM ride height.
Is this all I need to replace? Front and rear struts? Is it simple as that?
+@mentalpaperclip We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Can't you put a car scissor jack on the top of the knuckle and against the spring to separate the strut from the knuckle?
Great job!!
great video thanks
my wheel lug nut torque spec calls for 94 ftlbs as per the shop manual and the front torque spec calls for 233 ftlbs I have a 03 focus wagon 2.3L
Hello.
How to raise the level of a Ford Focus from the front?
Thank you.
You do not need to undo the driveshaft nut.
So many jump cuts in this video. I definitely notice you removed the calipers and rotors prior to putting your axel nut back on. Must have been a seperate video.
What size is the bottom strut bolt ?
len I like those locking pliers you have and use in the video I like the design where can i get a pair ?
ebay - parrot jaw pliers
On a 2007 ford focus do i need to gett an alignment after new struts.
Be a good idea.
What is that spray that looks like paint?
+luis gamboa The fluid we used in this video are Anti-Seize Grease and
Rust Penetrant.
That socket had a lot of wobble on it to be a 15
Is this different from a 2009 focus? How so?
+Rene Garcia This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
Installed mine and they work but whenever it hits a bigger speed bump, it makes a loud thud like the strut is bottoming out. Any solution to this?
+Layne Schwabedissen Thanks for checking us out! There could be multiple reasons why you're having this particular problem. It could be as simple as the upper mount not being torqued properly or there could be a defect with th strut. We suggest taking your vehicle to a nearby reputable shop to identify the cause.
Most likely the sway bar link (stabilizer bar links). These are fairly cheap and would be replaced anytime you do the strut replacement.
It’s the Sway bars. Recommend Moog sway bars, stopped the clanking throughout the whole vehicle
I do see a reason it's made in China and cannot see the internal differences. The outside similarity means nothing.
Ahhh, I do not have a hoist at home, what to do now???😟
I don't either. Just jack it up and put stands under it.
hi i been looking on your site for parts for my car but does not seem u stock ford falcon parts iam looking for upper and lower ball joints and ball joint press
+Michael Carstairs We can check our inventory for you. What year is your vehicle?
@@1AAuto 2002 series 3
+Michael Carstairs We don't have parts for that vehicle. We only list parts for US models. Thanks for checking us out! 1AAuto.com
+Michael Carstairs We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com
bought a full assembled strut from oreilleys got home took everything apart, set aside my old one, and couldn't fit the new in. examined the parts and it lacked that slight bevel at the bottom end of the strut. Sadly you skipped the hardest part of the process, getting the knuckle to line up with the new strut and slide in. im the only thumbs down unfortunately because you skipped the only reason i came to this video
+V Thanks for the tip! We'll pass this info along to our production team.
Same. Had to put back old one
Hello, Can you PLease Make A video of How to replace the Transmission position switch for Toyota Camry 2009. Please
+Zohaib Hussaini We're always cycling through cars filming hundreds of common repairs for common vehicles every month. We'll add this to our list of repairs to film. Check back again and hopefully we'll have it soon.
Don't wanna over tighten it? At freaking 266 ft lbs? Are you kidding me?
Watches video , goes to Ford dealer to get quality parts.
Well, low quality is technically quality. I guess if you want the car to keep breaking, keep using the crap Ford used.
@@kd5nrh 19 years my rear Ford shocks lasted. Bilstein makes them. Replaced with Ford parts not a whole lot more than ones he used on rear shock video in which he uses craptastic China-Parts. They came with all new hardware too.
lol u ment to loosen the top nuts first u did it in wrong order
+Michael Carstairs Thanks for the feedback! We'll pass this info along to our production team.
So I should loosen the nuts under the hood first?
@@jefferygordon243 You can but it makes the job harder; especially getting the lower end out of the collar.