Ford Focus Mk3 Shock Absorber Replacement Front & Rear DIY

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 16

  • @davyarthurs
    @davyarthurs Рік тому +3

    6:15 he’s smiling as he survived using those widow-maker spring compressors 😂

    • @FCMidge
      @FCMidge 10 місяців тому

      😂 I wondered why the wife bought me those 😊

  • @jakewhite9179
    @jakewhite9179 10 місяців тому +5

    Skipping the fast forward of you putting the hub back on the shock tells me its gonna be a nightmare 😂 nice straight forward video mate, thankyou. Let you know how i get on

    • @CarMechanicsTV
      @CarMechanicsTV  10 місяців тому +1

      Best of luck!

    • @FCMidge
      @FCMidge 10 місяців тому +1

      A fiddly one for sure that. Keep going….

    • @jakewhite9179
      @jakewhite9179 10 місяців тому

      ​@@CarMechanicsTV tutorial was spot on mate. I dare say getting the hub off was harder than getting it back on in my case. I put a piece of steel in the gap you used the spreader in (too block the bolt) and sent the pinch bolt in from the threaded side. Managed to open the mount on the hub a nice amout and the absorber slid straight in. Thanks for the help, earned yourself a sub

    • @jakewhite9179
      @jakewhite9179 10 місяців тому +1

      ​​​@@FCMidge definitely took some perseverance getting it all switched over haha, but its all done and working a treat

    • @FCMidge
      @FCMidge 10 місяців тому

      @@jakewhite9179 glad you sorted it. Funny car the Focus. Sometimes they pop right off, other times you wish you had a JCB to pull it out! 😂

  • @raygibbs9247
    @raygibbs9247 Рік тому +2

    Thanks for doing the video!

  • @ANDY-we7mr
    @ANDY-we7mr Рік тому +2

    Hi I have a ford focus mk3 titanium x I have just changed the shocks and the wishbones both sides and I hit something on the road on the motorway 🛣 cut the tyre and scraped the alloy wheels passenger side front and now terrible knocking and ideas

    • @FCMidge
      @FCMidge 10 місяців тому +1

      Top mount is quite likley if it’s taken a whack at the bottom. Lot of leverage on those

    • @ANDY-we7mr
      @ANDY-we7mr 10 місяців тому +1

      @@FCMidge it's sort out your dead right top Mark's on that thank you for getting back I done it my self new wishbones twice yes hit something on the motor way really hard damaged the alloy wheel

    • @FCMidge
      @FCMidge 10 місяців тому

      @@ANDY-we7mr no probs, sorry it took a while. Glad you’re sorted

  • @Smakheed
    @Smakheed 6 місяців тому

    No need to remove the wipers or scuttle panel, just remove the T30 screw and 10mm bolt at each end and lift the scuttle to access the 3 x 13mm bolts either side.

  • @1maico1
    @1maico1 11 місяців тому

    What's the mileage of the car?

    • @FCMidge
      @FCMidge 10 місяців тому

      From what I remember about 80k