DIGITAL DASH DISPLAY SIM RACING DIY
Вставка
- Опубліковано 28 лют 2017
- Make this easy dash display using a nextion 4.3" display and free SimHub software. Great addition to your racing sim rig.
It is USB, stand alone and can be used in combination with any steering wheel - Logitech, G25, G27, G29, G920, Thrustmaster, Fanatec, or OSW.
The display works the same as the Gear Indicator we made in the last video. It just uses different templates and mapping files.
The templates are able to be customized, you will notice the 599xx and a GT3 dash also in this video.
Parts List
-Nextion Display ebay.to/2U1ZvH7
-USB to TTL Module bit.ly/3Q9AYvV
-Wires included with display.
-Carbon face plate - ebay.to/2L5af3i
-M3 bolts+nuts ebay.to/2O2KRuO
-Soldering Iron BG bit.ly/3Q9vQI8
-Solder BG bit.ly/3zQWksI
-Best soldering Iron ebay.us/fqH7JZ
This site contains affiliate links for which I may be compensated
WIRING
--------------------------------------------------------
DISPLAY--------WIRE----------MODULE
--------------------------------------------------------
GND-----------BLACK------------GND
RXD---------- YELLOW -----------TX
TXD-------------BLUE---------------RX
+5V---------------RED---------------VCC
This build is working and tested in Assetto Corsa and Dirt Rally.
Thank you for watching and being a part of the channel.
Your comments and questions are all welcome.
Please ask any question about the design, build or parts used.
Also share with others who might like to build this project.
Check here for other SIM HACKS, MODS and DIY
/ @amstudioprojects
|SimHub | Credit to Author: Wotever|
|Credit to Butonz for the extra templates|
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommons.org/licenses/... - Навчання та стиль
![Beginners SimHub Nextion Dashboard Setup Guide! [STEP-BY-STEP] [SIM RACING HARDWARE]](http://i.ytimg.com/vi/R-Q9ynkOBF0/mqdefault.jpg)
![Beginners SimHub Nextion Dashboard Setup Guide! [STEP-BY-STEP] [SIM RACING HARDWARE]](/img/tr.png)
Dude your videos are soo satisfying to watch, keep it up and good luck with the channel!
Thanks Donald Pump!
amstudio Please you could put in the videos where you bought the materials to make the videos complements
www.amazon.com/Makerfire-Nextion-Screen-Performance-Display/dp/B013E3QHNS/ref=sr_1_1?ie=UTF8&qid=1489484686&sr=8-1&keywords=Nextion+Display+4.3
www.amazon.it/SunFounder-FT232RL-Adapter-Arduino-Raspberry/dp/B01K1RQE38/ref=sr_1_1?ie=UTF8&qid=1489484748&sr=8-1&keywords=FTDI+FT232RL+USB+to+TTL+5V+Module
100% agree
I know this is Old by you tube standards but i must say your videos are so well made that they are easy to Follow,. Thanks for doing these
I Can't tell you this enough times, but I do anyways. LOVE YOUR VIDS AND KEEP UP THE GOOD WORK. Its simply amazing. Thanks for all of this!
Thanks so much!!
man thank you so much for these videos. You saved me so much money and you set up is sooooooo cleannnnnnn. RESPECT TO YOU
You really make this stuff look so easy, really enjoying your videos. Good job
Thanks!
Awesome video bud ! keep it up.
Mate your videos are great. Now just to get my lazy ass out of my chair to order the parts and build it😂
Thanks man!
What a great channel! Deserves more subbers. Keep up the good work.
Thanks mate!
your video are amazing dude keep up with the great work. the first time I see your channel was the g29 steering wheel mod that one was amazing.:-):-)
Thank you !
And You have a great videos about racing simulator gadgets. I so inspired ! Thank you a lot :)
Thanks!
amstudio Can I get your help with some pedals i am doing?
always brilliant Content, please never stop making videos!
Thanks!
Nice project!! Congratulations!!
FN ---- genuinely you are a genius , love the step by step video , really really helpful , and great clear Quality pitchers , thank you .
Thanks josephzee!
You have an amazing channel!!
Another brilliant video
Really useful channel , keep up the good work :)
thanks for this, now i can replicate the Porsche 911 dash!
I look forward to your videos. Thank you! Very complicated to do 2 digital panels of 7 segments marking the best lap, last lap?
These videos are like therapy,so calming.You make me think I could do this stuff.
Thank's for sharing man !
Got my screen all sorted thanks for the video. Have you figured out a way to use key bindings to scroll throw the the display?
good job broooow!!!! so nice!!!!
Glad you like my templates :)
Thanks for the templates! They are really nice!
this guy is a legend
Subbed, awesome work and thank you for sharing the knowledge (",)
Your videos are the best! Just simple, good looking and very instructional. So satisfying to watch!
Here is a challenge (if it's possible): one of these displays as ETS/ATS map display. It's possible to do it?
Henry M sadly no nextion can only use kind of placeholders so it's not possible to display a map
U keep making cool add ons for my drifting/racing setup!
I have no idea how hard it will be, but can u make a video how to use an
tachometer/gauge work with sim racing?
Nice Video very well done
Really fucking awesome dude!!!
Keep like that men you are the best
Great job! Question, do you think this display can show all the numbers & data of the Aim Mychron 5 dash data logger?
Thank you
I would love to see you possibly make a custom Shifter and handbrake Mount mod that allows you to keep your handbrake and shifter in the normal placement inside a car. also maybe a setup tour?
Dude keep up your GREAT WORK!!! for us DIY guys. Hope your channel takes off soon :) To everyone else share this vid cuz I am @amstudio has a head on his shoulders. Smart Guy
I wanna make stuff like this for a car? but I'm a total newb. I'm trying to learn all I can about electronics. . maybe some day I can .. great video.
Hello is this working with arduino nano instead of the USB TTL module?
this channel is such a jem you get my patreon support
Good job!
Awesome! :)
Is everything the same including programming if it’s being used on rfactor 2?
Nice video ! I subbed
Amigo qual display e arduino está usando ? Oque mais seria necessario alem disso ? Parabens pelo trabalho,e desde já obrigado !
Hi! Can I ask how you did the progressbar with a mask applied to it so it looks small with low RPM and large with high ?
the download link is not valid anymore. anyone know of where to download this simhub dash from?
this is too cool
Way to much work for me but man youre a legend
Hey great Videos. I used one of ur vids to make a RGB Matrix/Buttonbox combo. Thanks a lot for that.
I have a few questions on this video: could this also work with a NANO ? and could it also wirk with other displays ?
What is the specialty of those Nextion displays ?
Thanks again and best regards from Germany,
HNY, Tim
Nice Channel!
Nice Vid!
simhub!very nice!
I enjoy your videos, always give great ideas of how to make anything simple. I would like to ask, do you think this project is possible using these displays :NX8048K070 or NX8048T070
Thanks
Would it be possible to mount something like this to the Thrustmaster TM Open Wheel Rim???
Looking at doing an upgrade to it and having a usb bungie cord for PC connection
Esse Display pode ser mudado, com outras informações? Como temperatura de pneus, motor ou classificação e voltar para marcha, velocímetro e tempo? Obrigadp parabéns pelos vídeos!
Hello amstudio, really awesome work. :-)
I want to built also this Display, i searched ebay for the 4.3 nextion Display and found only a touch display.
Is this the right one? Also i found the information, that this disply should be used with a usb poweradapter, because instable supply easily can damage the display.
Any problems so far?
greetings
hey this dash is awesome , i'm intresting if this configuration can connect it via can bus with my car ?
Waw Fantastic work.
A question can I use the same setting even if I play console? I have a Playstation 4 and a Thrustmaster T300 wheel, I'd like to learn how to make my own custom chainrings.
Thanks a lot and congratulations
Nice creation love it , does it show track map display with live car position on track map area in game ?
hello Amstudio, may I check will you consider to test the DWIN display as dash board screens?
Hi i bought a lcd of raspberry with hdmi and usb your program is valid to only connect it by usb? Thank you
Hi amstudio, great job, love you work. I have a question regarding the display. Is it possible use a touch screen display at the same way you are showing? :D Thank you in advance :D
a question, can we put the digital display and rev light on the same usb port?
Legendary mate, would the simhub software enable a manual style circle tacho as well?
Wow that is so cool, nice work. where do u buy all parts from the make all of these?
I really liked the song in the vid (nice vid) and I was curious what the song was.
Nice video as always. How about 7-segment gear indicator?
Can I use the nextion 7.0 display instead of the 4.3
Your channel is killing it on these guides. can I ask, where do you get all of your carbon fiber and how do you cut it?
Ordered an A4 sheet of carbon fiber 3mm. Cut with power tools then refine the finish by hand.
Can i add to the 'USB to TTL Module' a led-bar with gear-indicator AND the 'Nextion Display' at the same time? Or do i need a differnet module for the led-bar?
You need more subs
Great Job ;-)
Can I use the Porsche Dash with another LCD or Monitor over Simhub?
Could you run z1 dashboard (or other dashboards) with this configuration?
am i doing something wrong. I have to load a new dash every time i wanna change it. Is there a way to load a few at a time then scroll through them on the display
Dear Amstudio, congratulations for your videos, i made 4 projects with your indications, the last one this dash display, and works fine, but i have a little problem.... how i can change the screen? I works only with the first but for example how i can put the Ferrari 599XX? I tired but i not know how made.
Many thanks for your support.
Kind regards
@amstudio any chance you read this, the board that you used was an Arduino Nano? I get nothing when I search for a usb tll module
hej amstudio nice Video and thx for Sharing , but i have a question ...
will it work with my old Sony Xperia sgp512 Display? when yes can you Tell me what i have to do? Thanks!
Can I just buy a small 7" touch screen that connects via HDMI and put the cluster in windowed mode on the second display (the touch screen)?
hi there first many thanks for you videos. my question is this works on ps4 and for those who already use the gimx adapter it will be possible.
Many thanks for sharing your knowledge with the community.777
@amstudio how to make display with push button to toggle screens? thxs!
road to 10k!
Awesome
Yeah its pretty cool, I like the 599xx dash.
can you do complete car cockpit dude you r amazing
Hey man, would this mod work as a side screen to use Z1 dashboard ? or it will only be recognized by the software you are using ? thanks !!
Hola, una pregunta al modulo usb to btt se le puede agregar botones y un analago axis de un joystick? Y si se pude se puede controlar el sim dash con los botones y el joy axis
Is it possible to make a sound table type regulation tuning instrument and graphics?
Can we use it and install to a motorbike?? Please make a video hownto attach fuel gauge,speedo etc
Can you swap out the (rather expensive) touch screen for another? Aliexpress have screen over half price but without touch.
Instead of TTL-usb can I use Arduino nano with RGB to work in one usb port
Hey amstudio, do you reckon this will fit into a mychron 4 screen?
Great video and great project. One question, what screens do you use on your rig? Great minimal bezel. Keep up the great work.
27" LG IPS LED screens.
Hi the usb cable that you conect, is not de regular usb cable? because is smoller de swicht. what cable is it?
sorry for my english
Can I use the Z1 Dashboard program on this TFT display?
How did you change between the templets
do you need a nexion display for this or can you take any TFT display?
Brillaint videos. Does this work with project cars? Cheers
How did you change between the screens
Good day, i just wanted to confirm/ask you about your USB cable. I'm assuming that we need a Male to Male type of USB cable? Thank you for showing us your great work!
Hello , please, make video about monitor setup and how you fix it on table. I think lot of us it will be interesting.
yo man your videos helping me too much for make my dream sim racing stand and what is the 1st background song it's so sexy
Does this also work with the smaller 3.2 inch display, Nextion NX4024T032 ?
Can i put this in my steering wheel?
I love your vids!!
Can something like this be plugged in to the XBOX one and used in conjunction with the g920?
Do you think it's possible to connect this display to a obd2 , so it also works for cars?
Question... if I wanted to make one of these for my actual car? Like um... how would I do that?