Beginners SimHub Nextion Dashboard Setup Guide! [STEP-BY-STEP] [SIM RACING HARDWARE]
Вставка
- Опубліковано 8 лип 2020
- How to set up a Nextion screen with SimHub as a dashboard display. No soldering or programming is required, just follow my easy-to-follow guide!
▶ 3.5" Basic Nextion Display: www.banggood.com/custlink/KD3...
▶ Nextion displays on eBay: ebay.us/VJIL3m
▶ USB to TTL Serial Adaptor: (AmazonUK)amzn.to/2ZLF99Z (AmazonUS)amzn.to/3jpG5sk
▶ USB to TTL Serial Adaptor on eBay: ebay.us/xo2yMw
▶ Drivers for USB to TTL Serial Adaptor (if you need them) www.silabs.com/developers/usb...
▶ SimHub: www.simhubdash.com/
▶ 3D printed enclosure model: www.thingiverse.com/thing:152...
RELATED CONTENT:
▶ 2.8" Nextion 'Sim Racing Dashboard' in 3D Printed Case 👀QUICK BUILD VIDEO👀 • 2.8" Nextion 'Sim Raci...
▶ 4.3" Nextion 'Sim Racing Dashboard' in 3D Printed Case 👀QUICK BUILD VIDEO👀 • 4.3" Nextion 'Sim Raci...
▶ Basic vs. Enhanced Nextion 'SimHub Dashboard Display' Comparison Tests! • Basic vs. Enhanced Nex...
▶ Nextion Display SimHub test in Assetto Corsa Competizione • Nextion Display SimHub...
✅Subscribe to my channel here: tinyurl.com/yyhjua7h
If you liked this video, please hit the like👍 and consider subscribing. And drop in your comments below the video!
Buy a Coffee for Sim Racing Corner: ko-fi.com/simracingcorner
You can help support Sim Racing Corner by using my affiliate links. I will earn a small commission for products bought through the affiliate links, but it won't cost you anything! Thanks!
▶ Amazon (UK)amzn.to/3dNPW8d (US)amzn.to/2XEBgTf
▶ Banggood: www.banggood.com/custlink/Gmm...
▶ eBay: ebay.us/SR8jmP
▶ Buy discounted game keys from my Kinguin affiliate link: www.kinguin.net/?r=60396
▶ Buy discounted game keys from my Greenman Gaming affiliate link:
▶ Follow Sim Racing Corner on Twitter to get notifications on new videos and other sim racing malarky: / cornersim
*As an Amazon Associate I earn from qualifying purchases.
🚗SIM HARDWARE🚗
▶ SIM LAB GT1 cockpit
▶ Leo Bodnar SimSteering 2
▶ Next Level Racing Motion V3: (UK) amzn.to/2J7LcM9 / (US) amzn.to/2DT2dd2
▶ Heusinkveld Sim Pedals Pro
▶ Heusinkveld Handbrake
▶ DimSim Sequential
▶ Valve Index
▶ Derek Speare Designs P1 button box
▶ Lots of other bits and pieces
💾PC HARDWARE💾
▶ Intel i7 8700k: (UK) amzn.to/2J1pGZl / (US) amzn.to/2KrMdPC
▶ EVGA GTX 1080ti: (UK) amzn.to/2J3LSCb / (US) amzn.to/2FEIe3m
▶ Predator Z35 monitor: www.acer.com/ac/en/GB/content...
▶ 16GB Corsair 3000mhz RAM: (UK) amzn.to/2J3azP1 / (US) amzn.to/2FA5QGt
▶ Z370 Aorus Gaming motherboard (UK) amzn.to/2yHhetr / (US) amzn.to/2FEO1Gp
▶ EVGA SuperNOVA 750 PSU: (UK) amzn.to/2J1OIrb / (US) amzn.to/2zjj4li
▶ SanDisk SSD PLUS 240 GB: (UK) amzn.to/2OrRDPQ / (US) amzn.to/2KsZXJU
▶ Samsung 970 EVO 250: (UK) amzn.to/2QY5HgU / (US) amzn.to/2S7ibU4
▶ Crucial MX500 SSD: (UK) amzn.to/2RTSBSZ / (US) amzn.to/2FDfTus
▶ WD 2TB Desktop SATA Hard Drive: (UK) amzn.to/2J0kg0u / (US) amzn.to/2S7j4vS
▶ Antlion Audio ModMic: (UK) 5 amzn.to/2DfvSfq / (US) amzn.to/2FCFi7k
▶ Logitech Biro Gaming Webcam 4k: (UK) amzn.to/2DxRVPj / (US) amzn.to/2zl24Ll
▶ Logitech 920 Webcam: (UK) amzn.to/2OYHvcB / (US) amzn.to/2KshPoh
▶ Rode NT-USB Microphone: (UK) amzn.to/2OADN8Z / (US) amzn.to/2PQuVBC
#SimRacingTutorials #Nextion #SimHub
![A GREAT BUDGET DIY SIM RACING DISPLAY! [GUIDE] VoCore 6.8" Screen with SimHub!](http://i.ytimg.com/vi/Nci-vz5VAyA/mqdefault.jpg)
▶▶ You can support me on Patreon:
I watched this video recently and based on this I bought such a display. Later I have seen that the Nextion Plug in is depreciated. This is not your fault. I missed this. It was very difficult to bring the Nextion display to life. Uploading to the device worked from the beginning. No problem with this. But there was no communication between Simhub and the Display. After a lot of searching I found the solution. I had to change the baud rate to 115200 instead of 9600 (seems to be the default). Before uploading I had to change the settings of the program in the Nextion Editor to 115200. An in the debug mode I had to send a command bauds=115200 to the device. Then it worked. Just if somebody else has the same issue. Works great although depreciated.
Thanks for doing these tutorials on Simhub, the community appreciates it! Nice templates ;)
Nice one mate! Thanks for your efforts 👍🏻
Great video, excellent explanation, big fan of your channel, keep it up! 🔥🔥🔥
Just bought one of these because of your channel! Can’t wait!
Thank you very much. This looks far easier than I had considered.
Great tutorial. Really easy to follow...many thanks!
Great video , thank you .
great tutorial, thank you so much
Nice vid and a great channel 👍🏻
Thanks for the great setup guide. Will you be doing one to show how to add LED's to this kind of setup ?
Thank you, you are very kind and helpful, I looked on race department but there are for the 4.3 "and 3.2" display.
That makes like much more simple cheers. Do you know if the usb to TTL works with the current gen nextions?
thank a lot !!!
Hi, have you tried using a Arduino Micro Pro for this? Trying to get it working but it won't recognize the display. Thanks!
Great tutorial, I bought the 4.3 nextion screen, I open nextion editor and when I upload my dashboard I just see 1 page and if I touch the screen nothing happen. Any suggestions to what to do? Thanks a lot
Nice tutorial. One question can we change the idle wallpaper to something else? Like our own logo for example. If so where can we change it?
Good morning mate!
Excellent video. I have been looking at these for some time. Currently, I use a Anrdoid phone with another sim dashboard type application. Can you describe why I may want to use this solution rather than the Android phone solution I currently use? Thanks for doing this video.