M276 Mercedes-Benz | Common Problems & Reliability
Вставка
- Опубліковано 25 чер 2024
- If you're a proud owner of a Mercedes-Benz equipped with the M276 engine, or considering one, this video is your comprehensive guide to understanding its intricacies. In today’s video, Zach explores common problems, reliability factors, and insights that will empower you to make informed decisions about maintenance and ownership of an M276. This video is crafted for Mercedes enthusiasts, DIYers, and anyone intrigued by the engineering marvel that is the M276 engine. Knowledge is key to a smooth and enjoyable ownership experience, and Zach is here to provide you with just that.
If you would like to read more into the M276 Engine, we have an article on our Tuning Pro website: tuningpro.co/the-4-most-commo...
More information on the M276 Timing Chain Rattle: tuningpro.co/mercedes-m276-ti...
8020 Media Website:
8020media.co/
Check Out Our Portfolio:
Tuning Pro - tuningpro.co/
BMW Tuning - bmwtuning.co/
Diesel IQ - dieseliq.com/
Chevy Trucks - chevytrucks.org/
Volkswagen Tuning - vwtuning.co/
Porsche Mania - porsche-mania.com/
Muscle Car Club - musclecarclub.com/
New Videos Every Week. Subscribe so you don't miss a video!
►Subscribe Here: bit.ly/3xtNUph
---------------------------------------------------------------------
What is 8020 Media?
8020 Media owns and operates a portfolio of content websites and eCommerce stores in the Automotive industry. We provide over a million monthly readers with high-quality automotive content, focused predominantly on technical and performance modification guides.
---------------------------------------------------------------------
00:14 - Mercedes Benz M276 Common Engine Problems & Reliability Intro
00:37 - Most Common Engine Problems for the M276 Engine
00:41 - Mercedes M276 Common Problem #1 - High Pressure Fuel Pump
02:13 - Mercedes M276 Common Problem #2 - Carbon Buildup
04:05 - Mercedes M276 Common Problem #3 - Timing Chain
05:50 - Mercedes M276 Reliability
05:57 - DE30LA & DE35LA (M276) Reliability and Maintenance
06:46 - Mercedes M276 Common Problems Summary - Авто та транспорт
You can't separate the startup rattle and cam adjuster failure. They are intrinsically linked. The root cause of the startup rattle is oil starvation due to owners leaving synthetic oil in for close to 15k. It can't last that long like advertised, regardless of what the maintenance manual says. The upper timing chain tensioners didn't need a check valve behind them when new, problem arises at 60k miles or later. Run 5w40 not that eco crap. The chains don't stretch easily, are meant to last the life of the engine, and rarely need to be replaced. The chain slap absolutely causes damage to the pins in the VVTs, and labored idle at startup. Not addressing the issue will ruin the top side of engine, but it's an easy fix. New VVTs and upper timing chain tensioners, then run a qt of ATF in the engine for 500 miles, because they're full of detergents to fix the underlying issue, oil starvation. It's not a oil leaking from the tensioner problem, it's an oil not getting to the tensioner quick enough problem. Give it 2,000 miles after new parts and running new oil and if you're like me you're startup rattle will just disappear someday.
Excellent video. I was hit with the timing chain rattle. Wasn’t cheap to fix, and other repairs were due at the time so I sold it. Loved the car though, and tempted to buy another one- maybe a biturbo variant
L - Thanks for sharing your experience. Sorry to hear about that. How many miles did you have on it?
About to do the timing chain on mine a good link for the one you purchased
E - We have an article specifically for this: tuningpro.co/mercedes-m276-timing-chain-rattle/
It should be helpful with your research.
What mileage did that happen at?
This is great! There’s so much info on the B58 engine and the M340i but not enough on the C43 engine. I’m cross shopping between the two. Would you say the B58 is more reliable ?
V - We're big on the B48 & B58 engines because of its use in Toyota's.
I prefer the DI version they put in the 2012 to 2014 e300/e350's etc etc. with a tune they make around 330hp loads of bottom end torque, gearing is good they go very well and are very reliable if you keep on top of the oil in electronics harness issues.
A - Thanks for sharing this insight.
Any idea where the updated and redisgned timing chain is called
E - We have an article specifically for this: tuningpro.co/mercedes-m276-timing-chain-rattle/
It should be helpful with your research.
Had to dump my 2013 e350 because the cam shaft position sensors leaked oil into the wiring harness which wicked its way up to the ECU. Do you know if this issue was fixed with later variants of this motor?
T - It depends. This seems like a rare problem, but for the most part, the newer the engine, the higher the likelihood of updates.
Great video.I want to ask you I am interested in buying a CLS 2011-2014 model which engine do you think is more reliable.The 265 hp OM642 or the M276 306hp
A - Both engines can be reliable. It really all depends on mileage and prior maintenance.
I prefer the m276 306hp. And I think most dont realize how good it is tuned they make 330hp and loads of bottom end torque. But om642 isnt terrible either.
A - Thanks for this insight!
I own a DE30LA M276 with just 20,000 miles. Any suggestions for preventative maintenance? Oil: Liqui Moly 0W-40, changed @5k mile interval. No additives yet but I've been considering doing Seafoam in oil and gas a hundred miles or so before oil changes to help prevent carbon deposits. Thoughts?
Seafoam from time to time won't hurt. Carbon buildup won't cause any major issues, you can probably just do a walnut blast once you get around 80,000 miles. Not really much in the way of preventative maintenance other than sticking to 5k oil changes.
Use the green liqui Molly instead
Just want to throw in Camshaft position sensors no start '15GLK350.
C - Thanks for adding this insight.
There are two common with this engine bore scoring and oil in wiring harness I am surprise he did mention these any one own these engine know what I am talking about
H - Thanks for the insight.
Looking at a 2014 GLK 350 has 55k miles. How are these cars? Reliable for a Mercedes??
A - All depends on your budget and how well it was maintained prior.
I must be unlucky I have broken intake valve springs no one has mentioned that issue
M - That is new for us to hear. But thanks for sharing your experience!
I just hate the direct injection sound it's terrible and needed additional sound dampening for the ticking sound 💩
100 - Thanks for sharing your experience.
@@8020Mediawhat do you think of a e450 2019 with 55k miles 2 years of warranty is that a money pit or decent buy for 35k has all oil changes done on time
D - We aren't going to give any input on a purchasing decision, especially when money comes involved. However, make sure to grab maintenance records to ensure it has been maintained properly.