How to Replace Idler Arm 02-06 Chevy Avalanche 1500
Вставка
- Опубліковано 6 чер 2017
- Buy Now!
New Idler Arm from 1AAuto.com 1aau.to/ia/1ASIA00011
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged idler arm. This video is applicable to the 02, 03, 04, 05, 06 Chevy Avalanche
🔧 List of tools used:
• 12mm Wrench 1aau.to/opQ/1AXAA00010
• 12mm Socket 1aau.to/o5J/1AXAA00015
• 21mm Socket 1aau.to/orN/1AXAA00043
• 24mm Socket
• 2 Jaw Gear Puller
• Grease Gun
• Channel-Lock Pliers 1aau.to/obg/1AXAA00139
• Ratchet 1aau.to/oakt/1AXAA00016
• Socket Extensions 1aau.to/o5J/1AXAA00015
• Rust Penetrant
For More Info visit us at 1aau.to/h/bhU/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I buy your parts just because of your videos! You guys are awesome
+John Lowry Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
Just did this job. Do not under estimate the amount of force that may be required to get them to break loose. I used PB blaster, 3lbs sledge and cheater pipe......and did a lot of cussing. On the pitman arm I even had to put heat on it. This was in Texas so there was not a lot of rust. I really appreciate the video. Thank you.
Taking that front guard makes it slightly easier for visibility if you dont have a lift. Amazing video 🙌
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Rick V
They are charging me $560 to replace those two parts for my 2002 avalanche 1500,im going change it myself,thanks to you guys! I did my full suspension,tie rods,cv axle,wheel bearing hubs, and shocks,i bought those parts from you guys,,and i will definitely order that pitman arm and idler arm from uou guys after im finish watching the video!
+jesus Carmen.V Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Best step by step videos ever I ordered same parts from 1A so will be tackling the same job soon.
+Ty Scott Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY
I bought the idler arm pitman arm and the tie rods from you guys. your videos are extremely helpful.
+Jay P Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Just finished complete front suspension kit from you guys...great value!! Lots of informative videos, unfortunately I lost my paper included with parts, and you online help was wrong, and it’s almost impossible to search you video archive (for me anyway). Your online videos made the sale! I hope you guys can work on a online catalogue for your videos
+Andrew B Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. We will pass along your feedback regarding the online video catalog! 1AAuto.com
What type of grease? I am doing the complete front end suspension on 05 Tahoe thanks to your videos!👍
GREAT VIDEO as usual
Excellent video guys it help me a lot 👍
+Memo Lera Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
I want to get a frond end rebuild kit for my 2002 Chevrolet Avalanche 2WD but I noticed the one 1A sells says 4WD does that matter? or will it still work the same. Also I love your videos, much better than getting burned at a dealership.
would it be the same for a 2wd 2005 Chevy Tahoe?
Nice stuff
Thanks
Wobble? 35 degree adapter? Angle socket?
Question about the nut joining the idler arm to the bracket part. When I tighten this nut down, The idler arm seems to be too tight and it won't swivel on the bracket part. Do I back the nut off so it can swivel, or will the nut be too loose? 7:50 on the video. Thanks.
Excellent videos. To the T👍
Is it about the same process on a 98 Chevy K1500?
It's it possible to change out the idler arm while on the ground or does the vehicle have to be jacked up?
How many idler arm and pitman arm on a hummer h2?
Do you have a store in New England somewhere or are you only online? thx!!
Looks like idler arm an relay rod still had play?
Why not take the skid shields out of the way? Makes things less complicated.
😍great demonstration od dextricity - thx 👀
I bought my idler arm, idler bracket, and pitman arm from you. There are no grease certs, did I get the wrong parts? 2005 Chevy suburban 1500
Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions. The kit you purchased is listed for your 2005 Suburban 1500 as long as it has a 4 Groove pitman arm. +Matthew Hoffmann
How can you tell if its a 3or4 groove idler arm?
Rob Penn that’s the pitman arm and taking it off lol I’m in the same boat
Do you have to get an alignment after this...
+Edgar Arriaga If the steering wheel is centered you should be okay.
1A Auto Parts thank you
The one thing I wanted from this video was the puller, but there was no link!
Did you take off your front passenger tire? And can i use a 3 jaw puller? I dont have a 2 jaw.
+K g Thanks for watching! The passenger side tire was left on for this procedure, so you do not have to remove it. A 2-jaw puller will be easier to use based on what you are grappling to, but you could make a 3-jaw work! www.1aauto.com
@@1AAuto thank you! I learn from all your videos! I appreciate it!
orientation?
Is this the same on a 2004 silverado?
+Paul Taylor Here's a link to them idler arms that we carry for a 2004 Silverado 1500. There are also auto repair videos associates with these parts. Hope this helps you out goo.gl/e7uB9A
If I don't have a puller or close enough to a hardware or auto parts store could I hammer it off? Like putting the bolt flush to the threads?
Yes but use a different bolt.
Do they come pre-greased from 1 a auto ?
+ThatVegas HighriseDude Thanks for checking us out! Yes they will. 1aau.to/m/Shop-1AAuto-c
Mom's dishwashing gloves=safety gloves
+A Guy Thanks for the feedback!
I find it unusual that you said the bushing wore out because someone didn't grease it regularly but here your TRQ parts rarely come with grease zerks.
+Make It Mike The original style is greasable with the zerk fitting. Our parts are pregreased which does not require maintenance like the OE style. Thanks for checking us out!
@@1AAuto being able to grease it is what makes them last longer. A sealed oil pan on an engine advertised as maintenance free and unable to change the oil is not going to be a long life engine.
How much does this cost to get done on both sides?
+@sunshineintuitivehealing4793 We do not have a price available for the repair. We recommend contacting local mechanics to provide you with an estimate.
Does the vehicle need to be on Jack's for this?
if you have power steering i would. so you can turn the tires,
@@joeturtleneck2300 you don't want to turn the tires, if you do, you will need to get an alignment done.
Its also good advise in these Videos to state the Foot pounds of Tourque each nut and bolt Requires By Factory standards so as not to Create a Shattering point in the reassembly process of the linkages always... in house Factory Regs requires all of these parts to be assembled and Torqued to a Specifications For safety Regulations Of General Motors Corporation... Im an ASE GOLD CERTIFIED MECHANIC Who has worked for the Corporation and in Repair and Specifications GMC Chevrolet Cadillac and the whole Corporation has industry Standards and Guidelines to ensure safety and Quality an Durability of The Cars and Trucks We Manufacture for us to hold the Job Classifications I had we Had to learn the complete building Process and all Specifications its like 1.5 million texts Per each Of the different models manufactured yes in many models these specifications are Standardized based upon The Service that the Vehicle was Made to perform under and loads an Stress Factors but regardless all steering linkages need to be tourqued to factory Specs always that includes the complete suspension all parts and Components....
If you Was Working for me in my Shop you im Sorry would have been sent back to School or a few years under my personal Teaching So that you could be The Best You desire to be not as a Punishment but an Helping Hand Up to a Better Pay grade... have a great day and check out the Specs brother Wrench an Gear head
Castle nut torque spec?
+Tim Owen That should be 46 lb ft.
@@1AAuto thanks.
My bad didn't see pic on rt I apologize
Can I do it without removing bracket????? why change that.
+Robert Felp It is smart to replaced both since you will be working on that area of the vehicle already. 1aauto.com
torque specs?
+97JoMiller This is dependent on your specific model year, we would suggest googling this information for your specific model to get the exact answer. 1aauto.com
I use needle nose for the pins....who hired you?...lol(no worries just joking)
Your not wearing “safety gloves” lol
I had to thumb this video down. It’s the 1st one of yours that you didn’t include any of the torque specs… 👎