@Santana Hernandez thank for your great compliment. I’m using “Supreme Suspension 3” spacer lift kit, Moog Springs, Rough Country upper a-arms and their longer sway bar links, and Bilstein 5100 shock absorbers. Good luck luck with your upgrade. 🤙
@@camperaddict_ky8985 i installed 3 inch on my Nissan Titan pro4x and now I have problem with my cv boot they broken after 6 months.... you have the same issue ?
@@watchmanexpert Sorry for late reply. It is about 1200 miles since I did this lifted and haven’t have any issue with my cv joint yet or other components yet. So I will be keeping an eye on it. Thank you for sharing.
Just a question I just bought a 3" lift kit from RC also for a Titan but the spacers that came with the kit measure 1.5 inch or does it have to measure 3"?
If you’re using the stock spring it doesn’t change its orientation. The aftermarket “Moog Spring” that I’m using does change its orientation because the top and bottom of each spring end at the same rotation.
No issue with the upper a-arms clearance after I trimmed down the edges of the upper shock towers. But I wouldn’t recommend you buying a Rough County a-arm because of the welding quality. If I have to do it all over again I would go with a much beefier arms.
I think the armada front end are the same as the Titan, im not 100% sure, you might want double check with the manufacture that sell that leveling kit.
Why didn't you just move the clip on the Bilstein 5100s to the middle location to add an inch of lift?
@Santana Hernandez thank for your great compliment. I’m using “Supreme Suspension 3” spacer lift kit, Moog Springs, Rough Country upper a-arms and their longer sway bar links, and Bilstein 5100 shock absorbers. Good luck luck with your upgrade. 🤙
i realize I am pretty off topic but do anybody know of a good website to stream new series online ?
@Ulises Alexander i use Flixzone. You can find it by googling =)
Good DIY video Ky loves how it turns out👍
Thank Seth
@@camperaddict_ky8985 i installed 3 inch on my Nissan Titan pro4x and now I have problem with my cv boot they broken after 6 months.... you have the same issue ?
@@watchmanexpert Sorry for late reply. It is about 1200 miles since I did this lifted and haven’t have any issue with my cv joint yet or other components yet. So I will be keeping an eye on it. Thank you for sharing.
Just a question I just bought a 3" lift kit from RC also for a Titan but the spacers that came with the kit measure 1.5 inch or does it have to measure 3"?
My spacers also came with the measure of 1.5 inch. According to the manufacturer spec. .
.5 inch = 1 inch
Looks good. Front is 3 inches and back is 2 inch block?
Yes 2” blocks at rear. Thank
What perch do you have the bilsteins at?
Doesn't this change the orientation of the spring?
I see many leveling kits simply use bolt extensions
If you’re using the stock spring it doesn’t change its orientation. The aftermarket “Moog Spring” that I’m using does change its orientation because the top and bottom of each spring end at the same rotation.
Are your front cv axles ok being at that angle
Hey man I have an 06 Titan I want to do the Lyft on the front you know
Where I can go to get that done
hey bro, did you do the lift in the rear as well or no? I am thinking of doing mine both front and rear. 3" front and 2" rear.
Yes I did the 2” block lifted and Bilstein 5100 Shock 1” long.
Can you please put links for all parts used, thank you!
Awesome video!
I’m considering installing the same set up on my titan. How is it riding so far?
Thank you. So far the ride been great, just take a little time to get use to that 3” lifted.
Nice. How about those upper a arms do you get enough clearance and how are they holding up so far?
No issue with the upper a-arms clearance after I trimmed down the edges of the upper shock towers. But I wouldn’t recommend you buying a Rough County a-arm because of the welding quality. If I have to do it all over again I would go with a much beefier arms.
Will this fit 2012 nissan armada?
I think the armada front end are the same as the Titan, im not 100% sure, you might want double check with the manufacture that sell that leveling kit.
Where u get the camper?
Camper Shells USA @ Stanton, Ca
Whats a tire size
Mt 295/65/20, 35.25” tire according to Nitto Tire spec.