NP 231 J Jeep Wrangler Transfer case Rebuild step by step

Поділитися
Вставка
  • Опубліковано 22 лип 2012
  • These are the little guys that go on the shifting fork. Mine disintegrated I guess:
    www.amazon.com/gp/product/B000...
    Let me know if that link stops working
    My jeep was making a horrendous clicking noise every time I would let off the gas and coast while in gear. (You can hear the noise toward the beginning of the video when i twist the front drive shaft.)
    I managed to fix the problem for about 60 bucks and about 12 hours of my time. Totally worth it. And with this video, anyone else will be able to do the same thing. Let me know if you have any questions. I respond pretty quick.
    ----------------------------- If I helped you out today, you can return the favor by following me! -----------------------------
    Instagram: / zacksjerryrig
    Facebook: / jerryrigeverything
    Twitter: / zacksjerryrig
    Pinterest: / zacksjerryrig
    GooglePlus: plus.google.com/u/0/+JerryRig...
    -------------------------------------------------------------------------------------------------------------------------------------------------------------
    JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
  • Авто та транспорт

КОМЕНТАРІ • 123

  • @JerryRigEverything
    @JerryRigEverything  11 років тому +6

    lol, it was one of my first videos... cut me some slack..

  • @JerryRigEverything
    @JerryRigEverything  11 років тому +7

    Thanks! It was a lot of fun working on it. And extremely satisfying when it all worked again. Good luck man!

  • @JerryRigEverything
    @JerryRigEverything  11 років тому +1

    Its a fun project man. I'll take some time and frustration, but once you get it all put back together and working its the best feeling ever.

  • @jimmcgovern3538
    @jimmcgovern3538 6 років тому +6

    You guy's did a great job! Really proud of you for taking on that kind of project and seeing it through!

  • @JerryRigEverything
    @JerryRigEverything  11 років тому

    Thanks! It was fun. Gave me something to work on for a week. I enjoyed it.

  • @JerryRigEverything
    @JerryRigEverything  12 років тому +1

    @Ian Chapman it was a 93. good luck man. its quite the fun project. let me know if you have questions.

  • @GregHuston22
    @GregHuston22 11 років тому +2

    Informative video, good tip on shifting into 4wd to move the output shaft high enough up to get the snap ring back on. Just an FYI to anyone else doing this job spend the $12 at NAPA Auoparts for the snap ring pliers, this'll save you a lot of time and aggravation.
    I just finished putting mine back together, those plastic pads were worn off on the Big Fork (mode fork?) inside my case not letting 4x4 fully engage. Hopefully it's fixed now.

  • @JerryRigEverything
    @JerryRigEverything  11 років тому +1

    The Transfer case would be very very similar. Get it diagnosed at a repair place first. Sometimes they do it for free. It would be annoying to pull the T-case apart and find out it is working just fine.

  • @JerryRigEverything
    @JerryRigEverything  11 років тому

    Agreed. I had to take it apart 3 more times before i realized my bearing on the output was sticking out a mm too far. So i had to re seal it every time I put it back together. Thats why it looks like i used so much.

    • @69Planets
      @69Planets 2 роки тому

      Am I the only one who's noticing a voice change?

  • @JerryRigEverything
    @JerryRigEverything  11 років тому

    If i remember right it was part of the pump system. But its been about a year since i took mine apart.

  • @Benzfrd1
    @Benzfrd1 11 років тому +1

    All I got to say is good job man. That takes balls never getting into a job like that. And in the end it worked. Good job

  • @goldensilverback952
    @goldensilverback952 11 років тому

    That was extremely well done. Nice work guys. Have a 95 that has a cracked (shattered) case. Looks like its gonna be some doing! Thanks.

  • @joshmyers4927
    @joshmyers4927 8 років тому +18

    if i saw a jeep to buy with that mess on the transfer case, i would run away from it fast

  • @joeldallas6126
    @joeldallas6126 5 років тому +7

    JEEEEZE how to do it wrong - support the transmission! Remove drive shafts first....gha Factory service manual is free online.

  • @JerryRigEverything
    @JerryRigEverything  11 років тому

    I don't quite remember but i think it was 30mm. I made a video for how to change out the fluid. If you search "NP 231 J Transfer case flud change jeep" It should pop up.

  • @Jeepencias
    @Jeepencias 11 років тому +3

    good video man looks like im gonna be doing some of this myself

  • @Edjamakated
    @Edjamakated 11 років тому +2

    Just giving you a hard time man. Had to. Haha. Thanks for putting it up. I dropped mine last night and the vid gave me an idea of what I was in for.

  • @DennyOfTheAlpine
    @DennyOfTheAlpine Рік тому

    Crazy, this is before all the phone testing.

  • @dhscts
    @dhscts 7 років тому

    Great job for not sitting on the couch. Please, look to the right and check out some of the T. C. videos by folks who do it everyday. Not using "um" to much is a great start. Looking forward to the remake, (Why not to use so much silicon) where "this part" is replaced with words like pump, output shaft, yolk... Keep up the good work, DIY forever.

  • @MrChuckGreen
    @MrChuckGreen 8 років тому +1

    On my 03 TJ the skid plate is the mounting bracket, but otherwise the same.

  • @vadartime
    @vadartime 6 років тому

    Great vid guys! Lots of good info

  • @JerryRigEverything
    @JerryRigEverything  11 років тому

    lol, no, that was pretty easy actually, compared to the rest of the project. Just make sure to have something to support it when you are ready to take it off. Little guy is heavy.

  • @NoahKuzel
    @NoahKuzel 5 років тому +1

    Did you use enough RTV? The proper way to use RTV is to apply a bead behind the bolt holes and then compression will flatten it out without it getting in the threaded holes.

  • @garand555
    @garand555 10 років тому

    Heh, I found this vid about a year ago just wondering what it would take to crack into my t-case. Low and behold, my jeep started making the exact same noise not too long ago, and I yanked the t-case and cracked it open today. Yup, the shift range fork is worn out and I'll be putting a new one in as soon as I get it. Thanks for the vid, it made my life much easier.

    • @JerryRigEverything
      @JerryRigEverything  10 років тому

      Super glad I could help! You just saved yourself a huge chunk of cash by doing it yourself. UA-cam rocks.

    • @christophershepard301
      @christophershepard301 9 років тому

      JerryRigEverything I just bought a 95 grand Cherokee v8 with the same problem. Suspected tc and man I'm glad I found your video. Saves me a ton of time and cash. Thanks for the knowledge. My wife will be glad to have it going. Only paid 700 for it so its a deal

    • @JerryRigEverything
      @JerryRigEverything  9 років тому

      700 is way good! Good luck with the project!

  • @ianchapman8022
    @ianchapman8022 12 років тому

    Looking at doing the same thing. What year was the YJ? Thanks for the post

  • @mytoman120681
    @mytoman120681 2 роки тому

    Hello from Mexico, friend, in your reconstruction, did you see in which part of the transfer the speedometer cable connection is located?

  • @ShanleyThornton
    @ShanleyThornton 11 років тому

    is the tube in the t-case the breather vent?

  • @alexgo4210
    @alexgo4210 11 років тому

    how much different would this be on the 2001 grand Cherokee I kind of have the same problem but it would make a loud click noise every few seconds while driving at low speeds

  • @MrDrummerman32
    @MrDrummerman32 8 років тому

    DId you get the 31 or 36 link chain?

  • @wesleybranham6111
    @wesleybranham6111 11 років тому

    i have a 94 cherokee sport that has had the chain sliping and jumping around. i bought a rebuild kit for it... have any advice?

  • @aronjohn84
    @aronjohn84 11 років тому +3

    you dont need that much sealent man

  • @titaniumman_22
    @titaniumman_22 4 роки тому

    Thanks for the upload bro. The 5:27 sound was the wife calling to make sure you weren’t doing the repair job on kitchen counter. Been there. What did the apartment complex say about any asphalt stains? Im about ready to start mine.

  • @jasonreed3119
    @jasonreed3119 Рік тому +1

    My universal joints snapped & my rear driveshaft broke off the transfer case & the male end that comes out of the transfer case is crooked. What parts and where do you suggest to get the parts? 🙏🏻

  • @Jurinekfam
    @Jurinekfam 7 років тому

    QUESTION! @ 5:00 exactly you can see the output bearing after taking off the first guard cone. After you remove that snap ring can you somehow pull that bearing out without taking off the whole second base?

    • @steveyulenburg129
      @steveyulenburg129 7 років тому

      You have to split the case to R&R the output shaft bearing.

  • @czuk510
    @czuk510 6 років тому +4

    Not the drain plug!! that’s the detent cap don’t unscrew that it’ll drop out the spring and bullet! The drain plug is on the rear case half

  • @JerryRigEverything
    @JerryRigEverything  11 років тому +1

    lol, come on bud, it was one of my first videos. Cut me some slack...

  • @CalmRelaxYT
    @CalmRelaxYT 3 роки тому +2

    Who's watching in 2021

  • @testastrettar6
    @testastrettar6 3 роки тому

    My YJ will not work in 2WD but in 4WD. I assume TC is my issue. would you agree? and hopefully its the chain.

  • @kbartoletta
    @kbartoletta 9 років тому

    Hey Jerry... nice video - got a question.... when you installed the TC back onto the tranny.... you mention a little seal thingy.... I have mine out currently and putting a SYE on it... when i go to install i back into the jeep... is there a seal or something that goes in between the tranny and TC? I am assuming no RTV between there....

    • @MrThager
      @MrThager 9 років тому

      If you haven't got your answer yet Kevin Bartoletta the TC and tranny are completely separate from each other..meaning they do NOT share fluid. No seal needed there.

  • @fatherchop5796
    @fatherchop5796 10 років тому

    Thank you

  • @MrAdrianojujuba
    @MrAdrianojujuba 10 років тому

    ya man , nice vid

  • @chrwood70
    @chrwood70 4 роки тому

    Wait no bend test? or burn test? :)

  • @tobster421
    @tobster421 10 років тому +1

    Man, you shoulda put an SYE while you had it out anyway!

    • @JerryRigEverything
      @JerryRigEverything  10 років тому

      tobster421 I should have! I just wasnt sure if I was going to be able to even fix the issue at the time I removed it.

  • @stanlouis458
    @stanlouis458 8 років тому

    You're going to need more sealant than that. The stuff should be oozing out a lot further than that. Like drooping down like ice sickles. That way your oil pickup tube can suck up any excess inside the t-case plugging oil passages and detonating it all over the road leaving you stranded. Other than that good job.

  • @paulkaufman4901
    @paulkaufman4901 4 роки тому +1

    Where was the step by step rebuild part? All I saw was a poorly done R&R of the T-case.

  • @celeste0316
    @celeste0316 10 років тому

    My son in law ran my jeep off the road in 4wd the other day. Since then it wont run when we shift it into 2wd and is making a horrible loud noise. We managed to get it into 2wd twice but it wont drive reverse or go into park and can only be run in 4wd. I think its the transfer case but not sure what part of the transfer case it could be. Do you think it is most likely the Tcase or possibly the transmission?

    • @tobster421
      @tobster421 10 років тому

      It's most likely the t case. I just did the same thing with my yj. Turns out that I just snapped the slip yoke on my car so I decided to put on a new SYE on it. Just get under it and check the driveshaft and slip yoke assembly. Something probably broke there

  • @mr.chocolatehazelnutspread8317
    @mr.chocolatehazelnutspread8317 7 років тому +5

    your voice hasn't changed one bit

  • @heyudroppedurpocket
    @heyudroppedurpocket 7 років тому +1

    What was the part called that was ground down?

  • @codyblizz99
    @codyblizz99 8 років тому

    how long did it take you to rebuild the transfer case altogether?

    • @JerryRigEverything
      @JerryRigEverything  8 років тому

      +Cody Blizzard Now that I know what the problem was... I could repeat the whole process in about 4 hours. But this video took probably 8 to 10... It was my first time inside the case.

  • @thomasbrown3215
    @thomasbrown3215 10 років тому

    Will this be the same for a 1994 jeep wrangler yj.

  • @028bm
    @028bm 11 років тому

    Do you know the size of the fill/drain plug on the transfer case?

  • @cdawg4391
    @cdawg4391 10 років тому

    Hey I have this np 231 J on my 2003 Liberty sport.....t-case has 225,000 orig. miles on it and fluids have always been changed at recommended intervals.....also never abused the t-case.....makes a low speed growling noise now. ??? What could that be?

    • @JerryRigEverything
      @JerryRigEverything  10 років тому

      Its hard to say over the internet.... its it making that same clicking noise that I showed in the video?

    • @zachmw
      @zachmw 8 років тому +1

      Most likely a bearing going.

  • @WonderingAimlessly
    @WonderingAimlessly 11 років тому

    that little tube is connected to the oil pump

  • @paramarini
    @paramarini 11 років тому

    Hey man

  • @rg10969
    @rg10969 10 років тому

    I see that you replaced your shift fork. What kind of problems were you having before this repair?

    • @JerryRigEverything
      @JerryRigEverything  10 років тому

      When I would let off the gas and coast, It would make a horrible grinding noise. I kind of show what that noise sounds like in the first part of the video when I twist the drive shaft back and fourth under the Jeep.

    • @calebdrake3544
      @calebdrake3544 10 років тому

      JerryRigEverything My TC have been making this noise in the last several months...only happens between 10 mph and 40 mph

  • @paramarini
    @paramarini 11 років тому

    Damn ipad. I am replacing my transfer case after it grenaded... Was it a bitch to reach all 6 bolts holding the trans to transfer case?

  • @paramarini
    @paramarini 11 років тому

    Hey man good video. I am do

  • @skoollife5615
    @skoollife5615 4 роки тому

    Wow

  • @radelarosa97
    @radelarosa97 7 років тому

    bro can you attach a AX15 to a NP231

  • @pacolapala
    @pacolapala 8 років тому +6

    Counted 67 "umm"s up to the 7 minute mark... I had enough of "umm"s for a whole year

    • @JerryRigEverything
      @JerryRigEverything  8 років тому +3

      +Alberto Cabada lol, I think there is like 130 or so in the whole video. I went back and counted once too. Luckily.... I improved a little with my 'speaking on camera' abilities over the years.

  • @mauduitchloe422
    @mauduitchloe422 8 років тому

    Salut cassy

  • @twalker7452
    @twalker7452 6 років тому

    Where are the vacuum lines on it

  • @ryanismyname7526
    @ryanismyname7526 3 роки тому

    All that silicone will inevitably end up plugging the suction off your oil pump and...umm.... ruin your transfer case

  • @DuranSexton
    @DuranSexton 8 років тому +5

    Ummmm

    • @JerryRigEverything
      @JerryRigEverything  8 років тому +7

      +Duran Sexton I only say it like 170 times in 15 minutes. Chill out bro.

    • @hassanjamil1099
      @hassanjamil1099 7 років тому

      *only

    • @Connie_TinuityError
      @Connie_TinuityError 7 років тому

      +JerryRigEverything Meanwhile most people say it 500 times in 15 minutes.

  • @slinger752
    @slinger752 3 роки тому

    Holy Olddddd and that fact you were calling the c clips "orings" LMAO

  • @TheRedMammon
    @TheRedMammon 8 років тому +6

    jeep makes phones?

  • @Jdmyonal5.0
    @Jdmyonal5.0 4 роки тому

    It now July 21 2020 and covid 19 is bad 2012 zack your real name

  • @ryanismyname7526
    @ryanismyname7526 3 роки тому

    Ummm... is this the first time you've ever taken ummm.. one of these apart before? Umm..

  • @ismail.a5590
    @ismail.a5590 3 роки тому

    Pls reply and help me sir plslss

  • @stevedavis9973
    @stevedavis9973 6 років тому

    What

  • @NONAME-kw3pu
    @NONAME-kw3pu Рік тому

    10 ahhhmmms in 1 minute... ahhhmmm.... ahhhhmmmm ahhhhmmmm ahhhhmmm did u count how many ahhhhmms u put in ur ahhhhmmmm video before u ahhhhhmmm uploaded it ahhhhmmmmm

  • @ferozkhan8800
    @ferozkhan8800 3 роки тому

    Bro Plzzzz Give Me ONe Phone plzzz God bless you brother 😔😔😔

  • @Edjamakated
    @Edjamakated 11 років тому

    Um. Um um um um um um um um um um um

  • @rodrigogutierrez8063
    @rodrigogutierrez8063 Рік тому

    Como tanto silicona roja 😂👎👎👎

  • @overlandadventures2294
    @overlandadventures2294 4 роки тому

    Bro.... please delete this video.... you did all of this wrong..... hahahaha that's not the drain plug hahahaha omg please delete this