I built a big one exactly because in my Clone King the nutrient temperature was way too high and caused expensive seedlings to fail. External pumps are definitely the best way to go for clones or seedlings. I bought my 13 gallon buckets and lids, valves, hose, bulkhead fittings from you a couple years ago after watching your fallponic videos. Great setup Gary and I thank you for for sharing your knowledge with us.
I run two small air stones in my clone king. It helps with keeping the water fresh. Just can’t run it 24/7 if your not cooling the water in some way ie chiller, ice. I’ve noticed a major difference in rooting time. It does help
HOPE THIS HELPS... Water temp should be between 68°-72°F degrees. And when I clean mine, I run a vinegar run. If you think you have a fungi in water use hydrogen peroxide that will kill good and bad bacteria. Just trying to help. Also I have aquarium heater set at 70° in the water. Mine is in a shed, so night time roots stay warm. LIKE YOUR CHANNEL. Informative, Educational, and K.I.S.S. Proof. That's A, Keep It Simple Stupid. Thank You!. -Tony
Hi there. After watching this video multiple times...... I had to build one!! 1. How long before roots will start to appear? 2. How often should I run the watering system and for how long each time? Cheers, Chad
I soak all my parts in white distilled vinegar before and after every use. Yes there is some sort of bacteria that grows in the dark . But again soaking parts In vinegar takes care of that Another good tip is using half tap water along with distilled. The chlorine cuts down on bacteria being able to form.
Gary would it be possible to cut that bucket in half and shorten it? I like this set up but I’d have to new light dedicated just for it . I like using my lil 2 gallon cloner cuz it’s low profile and can set it right on my kitchen counter with a couple T5s under the kitchen cupboards. Bout 26 inch clearance between Cabinet countertops.. Anyways I think that would be a good product for those with space limitations but like clones on deck.
1 - I ph'ed the water to 6 and didn't use nutrients at all in this video, I would suggest a rooting hormone to help get faster rooting and some of your usual bloom formula and micro's, it's a hard question, I have done it many ways, I will do a video at some point on this, I wish I had time to do a ton of videos but soon, I did do a clone video if you check out some of my older cloning videos. 2 - yes , email us at dave@pahydroponics.com and we will see what we can do. Cheers! Gary
Just found you guys given you a follow i live in the valley and will definitely have to visit your store the hydro store for the allentown area isn't great so it would be nice to see one that actually has hydro stuff lol
Hi Gary, which house plants are you cloning there at the end? Your other videos feature several plants you have in your store in the background which look so cool, just wondering what they are. That ending too... made me choke on my coffee and laugh a little too hard for too long. Great info as always and very entertaining, thanks from Australia!
You must of not had enough water in it bro... Or use a timer. I get 100 percent every time with same cloner had it for seven years,just keep clean replaced manifold a few times and good to go.
Gary, you're the man! haha.
I built a big one exactly because in my Clone King the nutrient temperature was way too high and caused expensive seedlings to fail. External pumps are definitely the best way to go for clones or seedlings. I bought my 13 gallon buckets and lids, valves, hose, bulkhead fittings from you a couple years ago after watching your fallponic videos. Great setup Gary and I thank you for for sharing your knowledge with us.
Gary is the man when comes to hydro builds, hands down!
Grew some monster plants with his help!
Thanks again G!
If you get a whole saw for metal it has smaller teeth less likely to break the plastic and you do not have to go backwards
ahh a much smarter solution vs the pump in the tank, great info as always gary!
Awesome, great finish..😂
I run two small air stones in my clone king. It helps with keeping the water fresh. Just can’t run it 24/7 if your not cooling the water in some way ie chiller, ice. I’ve noticed a major difference in rooting time. It does help
love your videos, great job!
Looking forward to the cloning video!!!!
Good System, Thank you for sharing your Videos.
Thanks for watching! G
You can use an ice pick to start the holes for the sprayer heads.
1st! Been waiting for these videos to return I love them!
I love your videos, thank you so much for sharing them!!!
Thanks!
WOW!!! Thanks ! Seriously ! Have a great weekend and thanks for watching! Gary
Gary you should expect more of this your videos are very helpful thanks
luv your help
Very nice cloner🧐
ordering one next week !
HOPE THIS HELPS...
Water temp should be between 68°-72°F degrees.
And when I clean mine, I run a vinegar run.
If you think you have a fungi in water use hydrogen peroxide that will kill good and bad bacteria.
Just trying to help.
Also I have aquarium heater set at 70° in the water. Mine is in a shed, so night time roots stay warm.
LIKE YOUR CHANNEL.
Informative, Educational, and K.I.S.S. Proof. That's A,
Keep It Simple Stupid.
Thank You!.
-Tony
Hi there. After watching this video multiple times...... I had to build one!!
1. How long before roots will start to appear?
2. How often should I run the watering system and for how long each time?
Cheers,
Chad
The pump should run all of the time.
You will see roots developing within a few days to a week.
Thanks for watching and commenting.
-w
which house plants are you cloning there i think i have one like that but do not know what it call got from someone had over 10 years
I soak all my parts in white distilled vinegar before and after every use.
Yes there is some sort of bacteria that grows in the dark . But again soaking parts In vinegar takes care of that
Another good tip is using half tap water along with distilled. The chlorine cuts down on bacteria being able to form.
Gary would it be possible to cut that bucket in half and shorten it? I like this set up but I’d have to new light dedicated just for it . I like using my lil 2 gallon cloner cuz it’s low profile and can set it right on my kitchen counter with a couple T5s under the kitchen cupboards. Bout 26 inch clearance between Cabinet countertops..
Anyways I think that would be a good product for those with space limitations but like clones on deck.
Hey there, Lid would not fit if cut in half, there are lots of other bins and buckets out there if your good at DIY.G
@@PAHydroponics thank you.
I have a clone king 36 site. And my lid is beveled. I’ve been thinking about building my own this kit is something I may be a player on
Thanks :) DIY kits and multiple choice on site numbers will be on website in a couple days. - G
27:58 GOT EM
Question 1: How much & what kind(s) of nutrient(s) to use in the bucket?
Question 2: Can you ship 100 "RINGS" / "COLLARS" to Canada?
1 - I ph'ed the water to 6 and didn't use nutrients at all in this video, I would suggest a rooting hormone to help get faster rooting and some of your usual bloom formula and micro's, it's a hard question, I have done it many ways, I will do a video at some point on this, I wish I had time to do a ton of videos but soon, I did do a clone video if you check out some of my older cloning videos.
2 - yes , email us at dave@pahydroponics.com and we will see what we can do. Cheers! Gary
Just found you guys given you a follow i live in the valley and will definitely have to visit your store the hydro store for the allentown area isn't great so it would be nice to see one that actually has hydro stuff lol
Do you think the EcoPlus 185 has enough power for this build? If the bucket were smaller?
Hi Gary, which house plants are you cloning there at the end? Your other videos feature several plants you have in your store in the background which look so cool, just wondering what they are. That ending too... made me choke on my coffee and laugh a little too hard for too long. Great info as always and very entertaining, thanks from Australia!
LOVE IT
How many of those adapters do you want?
I will stick with my peat pellets to start. I have always had issues with cloning setups and zero issues with peat pellets
I hear that! I like my pest pellets too, clone machines do have there fan club and this one is pretty cool :) Thanks for watching! G
Gary, I am wondering if you would like to get a free sample of Growers Republic LED grow light with freight prepaid to test for several months? 😁😁
You must of not had enough water in it bro... Or use a timer. I get 100 percent every time with same cloner had it for seven years,just keep clean replaced manifold a few times and good to go.
That's great! I use H2o2 for a couple hours before I start cuttings and seems to keep it right, Thanks for watching. G
I enjoy all your videos,your very smart but yet humble
🔥💨🤘🏾
Second
Hey !! LOL, Hey fans check out Indoor Promised Land channel:)
Would this work with an 8 gallon ez stor bucket?
The 8 gallon doesn't have the rim to sit the manifold on, 13 works best for this one. G
Bro you chopped your hair off. New age hippie
That was the 1st thing I noticed as well hahahaha
Ohhh Mann!!! You cut your hair 😮