$450 Turbo Kit Installation part 2

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ •

  • @_Machine631_
    @_Machine631_ Місяць тому +36

    one of the most underated youtubers. this man makes budget work and i LOVE it.

  • @axrod1990
    @axrod1990 Місяць тому +46

    Best DYI channel on youtube

  • @pingislife2653
    @pingislife2653 Місяць тому +15

    I appreciate your tip on cranking until oil comes out the feed line and then crank some more after it's connected. Thank you for the trick on flaring your own pipes at home. I haven't seen that before. You're the real shade tree hero, man.

  • @SlowDelSol
    @SlowDelSol Місяць тому +13

    Days seem better when 79th Productions uploads a video

  • @elbbqsr1450
    @elbbqsr1450 21 день тому +1

    I'm currently working on a turbo project and this has been the most in depth video I've found thank you very much Sir!!! Subscribed

  • @stevejohnson8850
    @stevejohnson8850 Місяць тому +4

    A true diyer! Don't have all the fancy tools and shows how to work around that. Love this channel

  • @jeremiahsalhay795
    @jeremiahsalhay795 Місяць тому +2

    Like I said since the beginning of this channel... THIS IS WHY YOUY NEVER MISS A 79TH PRODUCTIONS VIDEO!!!

  • @choglatemilg
    @choglatemilg Місяць тому +4

    love these videos dude, its DIY for everyone not just people with a lot of money

  • @PsyhcoTR
    @PsyhcoTR Місяць тому +1

    Super, clear and correct explanation... You are great, man.

  • @jayrave4
    @jayrave4 Місяць тому +2

    One of my favourite channels - you are a master of budget builds!

  • @lowrdr91382
    @lowrdr91382 Місяць тому +3

    That's a pretty genius idea with the pliers.

  • @Jcruce7122
    @Jcruce7122 Місяць тому

    Hardest working guy on youtube.... love your hustle man. Have a blessed day

  • @slumbercrash
    @slumbercrash Місяць тому +1

    Thank you for keeping these hondas alive. Love your channel

  • @Kowyn
    @Kowyn Місяць тому +1

    I appreciate you boss, your work is inspiring, I've been gathering the parts to build my dream Gen 1 Turbo Diesel Toyota pickup, finally have what I need to start. Now I just need to do it!

  • @TmacMac-pv5jf
    @TmacMac-pv5jf Місяць тому +1

    Man that’s a very clean and descriptive installation!!! You give me motivation

  • @dancansmart4073
    @dancansmart4073 Місяць тому

    This was so good to watch, you just earned a sub man, you made a turbo install so easy bro, I've been watching a lot videos and they where all complicated, but this gives a bit of motivation to finally turbo my civic the right way with good info aswell

  • @__AG__
    @__AG__ Місяць тому

    by far the best and most in depth turbo install video ive seen, also the easiest to understand and follow along. Also like that you mentioned the break-in procedure of the turbo, most videos ive seen dont even explain that crucial step.

  • @tariqdacres7465
    @tariqdacres7465 Місяць тому +1

    Love the channel. Truly inspiring, never lose hope!!!!!!

  • @CJWinston-d3u
    @CJWinston-d3u Місяць тому

    I've got to be honest, you are absolutely amazing and very knowledgeable and although I'm nowhere near confident enough to embark on a swap and subsequent turbo kit on my 7th gen civic yet, you definitely have given me the inspiration and the motivation to take my time and do it all right the first time. Thanks man, I appreciate you!

  • @slimsqde7397
    @slimsqde7397 Місяць тому

    your videos are the best man. they always inspire me, im finally at the point in my life where i can buy a project car and im gonna be doing the same stuff you do, as budget as i can without cutting corners. keep up the content man i cant wait to see this thing ripping.

  • @9blackthunder
    @9blackthunder Місяць тому

    I've been following your build and I'm waiting for a "Super Excited" merch to drop.

  • @ShumonsCarMods
    @ShumonsCarMods Місяць тому

    I appreciate your tip on cranking until oil comes out the feed line and then crank some more after it's connected. Thank you for the trick on flaring your own pipes at home. I haven't seen that before. You're the real shade tree hero, man. one of the most underated youtubers. this man makes budget work and i LOVE it. 😍🥰🤩🤑😜😎🥸💙❤💯👌✌🤙👍💪💯❤

  • @michaelgonzalez69
    @michaelgonzalez69 Місяць тому +2

    Part 3!!!!!!🎉

  • @jdmlordsalamander6397
    @jdmlordsalamander6397 Місяць тому

    Happy to see another video from you my man…..keep them coming as often as you can

  • @nicholaskondylis5333
    @nicholaskondylis5333 Місяць тому +1

    Best yt channel ever we need to get bro rich fr 🙏🏽

  • @bigalalbig
    @bigalalbig Місяць тому

    Great realistic budget content as always. Love your content. Small tip, make sure the sun is facing you when shooting, like at the start. All the best.

  • @WhosThatRedPrelude
    @WhosThatRedPrelude Місяць тому

    glooks i appreciate these vids im currently turbsking my integra and you've helped so much!!

  • @sbeezy562
    @sbeezy562 Місяць тому

    This dude can make it work just a little Madd props 79th Production

  • @VonArchive510
    @VonArchive510 Місяць тому

    Checked my youtube every day to see if you posted part 2! Thank youuu

  • @Kampf0r
    @Kampf0r Місяць тому

    This video made my day better. Cheers, Justin and God bless.

  • @cloxdy5437
    @cloxdy5437 Місяць тому +1

    Let’s gooo thank you for releasing part 2

  • @JaycobGTR
    @JaycobGTR Місяць тому

    Waited for this video long enough haha nice work bro !

  • @JoseRomero-fx8gu
    @JoseRomero-fx8gu Місяць тому +1

    Love your videos your a great teacher 👍

  • @GarasiFelixDan
    @GarasiFelixDan Місяць тому

    brilliant budget build. Please Do More . Oh yeah that intercooler piping off the Throttle body needs to be modified to be more neater. Other than that you re doing amazing job man !

  • @xvecinox
    @xvecinox Місяць тому

    sheet, im exited for you. cant wait to see part 3

  • @kevinwashington7311
    @kevinwashington7311 Місяць тому

    I'm looking for a old honda now just to play around with it on the weekends....good stuff!!

  • @blendzofficial7814
    @blendzofficial7814 Місяць тому

    finally! this is what i’ve been waiting for

  • @kdark54
    @kdark54 Місяць тому +1

    king of budget builds

  • @E85_STI
    @E85_STI Місяць тому

    That’s not a bad flare for doing it at home that’s pretty good. For that power it will hold for sure with a good clamp. I kept blowing the T bolt clamp off on my STI but that’s at 40 psi and I have an ETS piping kit for my car so switching to a worm clamp held better ironically so yes most times something might seem like it won’t work but it does.

  • @sinformant
    @sinformant Місяць тому

    22:43 id pull the fuel pump relay as well so it isnt spraying the cyliners with fuel washing the oil off the cylinder walls as well

  • @stewarthadican7239
    @stewarthadican7239 Місяць тому

    Great video. Cannot wait for part 3!!!!

  • @lostforevermore7150
    @lostforevermore7150 Місяць тому

    Best video editing from you I have ever seen your should work for some kind of car network or something. 😊😊

  • @fritzkleinman
    @fritzkleinman 23 дні тому +1

    Here in LA not one muffler shop would touch that last pipe, because gruesome Newsome has his gestapo secret police out making sure that fun is Verboten...lol...

  • @Edwin_Nani
    @Edwin_Nani Місяць тому +1

    Been waiting for part 2 😁

  • @ivanpashkov299
    @ivanpashkov299 Місяць тому +2

    Привет из России) Я тоже люблю свою honda civic ferio ek3 2000г, езжу на ней уже 15 лет)

  • @lostforevermore7150
    @lostforevermore7150 Місяць тому

    Love your pipe flaring tool it was awesomeness 😎😎

  • @kimyeongho5037
    @kimyeongho5037 Місяць тому

    Keep the videos coming baby!! Lemme hear that turbski spool

  • @ronyassa8512
    @ronyassa8512 Місяць тому

    how do you set or control the amount of boost on this? love your videos man. finally someone posted an easy to understand turbo installation video.

  • @private5371
    @private5371 Місяць тому

    Hell yea brother cant wait for part 3

  • @jmbt316
    @jmbt316 Місяць тому

    Es muy alentador ver los videos de este canal, sigue así 🙌

  • @mm8436
    @mm8436 Місяць тому

    Glad I'm not the only one without a deburr tool

  • @TheMapleDaily
    @TheMapleDaily Місяць тому

    Don't forget to get a good tune, its one of the most important steps is to get a good reliable tune thats safe and healthy for what mods you have!

  • @technogeek1219
    @technogeek1219 Місяць тому

    Great job on the install, it looks really good and I am super excited about it too, now my question is, all that power that the turbo is generating that is on stock internals? Can the pistons are piston rings handle the heat? Awesome job Justin.

    • @79thproductions
      @79thproductions  Місяць тому +1

      It's stock

    • @technogeek1219
      @technogeek1219 Місяць тому

      @@79thproductions Nice, I am super excited to know that the engine can handle it no problem, thank you for the heart Justin, I really appreciate it brother, God bless you.

  • @BudKing96
    @BudKing96 Місяць тому

    hope one day you hit a milly subs

  • @200cc.
    @200cc. 21 день тому

    Great job thank you for the explanation

  • @anthonysoto465
    @anthonysoto465 Місяць тому

    For this setup will it still require the cooler range spark plugs ? Great DIY video!!

  • @rose._.gostoopid
    @rose._.gostoopid Місяць тому

    been waiting on this one

  • @PCaldeira
    @PCaldeira Місяць тому

    Congrats its looking good!

  • @gregautomotivation
    @gregautomotivation Місяць тому +1

    Can’t wait to do my turbo on my accord

  • @SHWELL11
    @SHWELL11 Місяць тому

    Well done!

  • @bpoirier4
    @bpoirier4 Місяць тому

    I’m glad you’re using a guard on your angle grinder now lol

  • @fredmorse899
    @fredmorse899 Місяць тому

    I’m just building mine today! Perfect timing for your drop. Thanks
    Where did you get your dump pipe please? My kit doesn’t have one

    • @79thproductions
      @79thproductions  Місяць тому +2

      I took the flange that came with the kit to the muffler shop. They welded a pipe on it

    • @fredmorse899
      @fredmorse899 Місяць тому

      @ thanks - I need a muffler shop! I really appreciate your budget builds

  • @waynejordan7473
    @waynejordan7473 Місяць тому

    By any chance do you have a video of how you installed the fuel pump and injectors ? lol man you really motivated me to do this to my dc4!

  • @policeh956
    @policeh956 Місяць тому

    what a great video, nice nice. thanks

  • @sinformant
    @sinformant Місяць тому

    They sell a Tool for putting the bead on intercooler piping for super cheap. I got one on ebay for like $15. Wish i had it in the past as i had to flare piping like that on my car and it popped off a few times until i treated it with hairspray. I was running 22psi though so maybe lower boost it handles just fine.

  • @HondaMikeSmith-m3h
    @HondaMikeSmith-m3h Місяць тому

    Love your content Justin, but what ECU are you using on this build? I have a CR-V I want to boost so what ECU should I use?

  • @Edwin_Nani
    @Edwin_Nani Місяць тому

    Pure gold 🏅

  • @aimaster-e2c
    @aimaster-e2c Місяць тому

    Love the videos man, quick question tho. Do you think it would be worth it to turbo my 7th gen civic with 340k on it, enigne still runs strong no issues whatsoever mechanical wise?

  • @Vacationtime247
    @Vacationtime247 Місяць тому

    Good advice with priming the oil for the turbo. The plier crimper tool is actually kinda genius.
    VT247

  • @alessandropanella3630
    @alessandropanella3630 Місяць тому

    Nice video man ,you good

  • @Onetime-bf1ef
    @Onetime-bf1ef Місяць тому +2

    Let’s go!!! Had to click soon as I seen you drop. 😅

  • @dranrebbillones3634
    @dranrebbillones3634 Місяць тому

    your the best dude.. my question is can a civc automatic engine be turbo?. my car is a 99 civic dx

  • @NicaGarage
    @NicaGarage Місяць тому

    Great job bro

  • @fredmorse899
    @fredmorse899 Місяць тому

    Also are you doing ECU, injectors and fuel pump upgrades too?

  • @J.F.K.O
    @J.F.K.O Місяць тому

    I once saw a guy put a brand new turbo on his LS engine, but for some reason he didn't do a feed line for the turbo. So when he did a bunch of test fires, what do you think he used to lube the turbo?. Wd friking 40 just sprayed a bunch of it in the turbo and started it. Facepalm wd40 is going to go straight through the turbo faster than he can get in the car and start it :P

  • @user-h2db3u
    @user-h2db3u Місяць тому

    Does it need a little more than 4.5 quarts? Some of the oil is going to be in the lines and turbo. I would add a little extra to account for that.

    • @jacoblarkin7145
      @jacoblarkin7145 День тому

      I’ve heard from my tuner that it takes 5 quarts now with the turbo instead of 4.5

  • @nicklindsey3872
    @nicklindsey3872 Місяць тому

    I've got a question what first car/truck builds on a budget of $5000 do you recommend/suggest?

  • @shawntomkins1028
    @shawntomkins1028 Місяць тому

    Were in Spartanburg too and are building a turbo d series and wondering if you mind putting us on with your tuner?

  • @BurrNinja
    @BurrNinja Місяць тому

    Very nice car, and build. How much power are you look to achieve?

  • @enriquecantarero
    @enriquecantarero Місяць тому

    what ecu are you running for your swap? my b swapped eg sounds crammed on cold start like an old v8 and i have no idea what it is. but after it warms up its fine

  • @ChopstikCharlie
    @ChopstikCharlie Місяць тому

    first drive should rip, whats the tuning plans?

  • @atemegabites2251
    @atemegabites2251 Місяць тому

    Please paint the piping black and change the couplers also to black . This will make it look less cheap

  • @StefNefast
    @StefNefast 2 дні тому

    Salut
    Pour être sûr que le turbo soit alimenté en huile tu peux aussi débrancher le tuyau de vidange.
    Comme ça tu es certain que l'huile a traversé le turbo.

  • @adrianbecerra1241
    @adrianbecerra1241 29 днів тому

    Wont the engine flood with gas as well ?

  • @p507j
    @p507j 13 днів тому

    hello sir, i have a 98 ek civic can i install turbo with stock fule system and ECU ? the ECU not really stock i have a ready file "hondata" and the engine is stock b20b/b16a

  • @vincentflores4725
    @vincentflores4725 Місяць тому

    Nice let’s roll 👍

  • @Cichlidtherapy11
    @Cichlidtherapy11 Місяць тому

    Nice kit, Would it work in a civic r18 engine and if so send link please

  • @q99i
    @q99i 28 днів тому

    good video i like it

  • @poketrainersquad9772
    @poketrainersquad9772 Місяць тому

    Don't u have to tune the ECU???

  • @thepunchboytommy4427
    @thepunchboytommy4427 Місяць тому

    Let's go!

  • @joseoropeza7214
    @joseoropeza7214 Місяць тому

    Pull the fuel pump fuse out next time. You can hear the engine flooding.

  • @Mondo257
    @Mondo257 Місяць тому

    would this fit my 1991 honda civic hatch back ?

  • @PROSTO4Tabal
    @PROSTO4Tabal Місяць тому

    What about ecu tune ?

  • @awesomeapeultra6527
    @awesomeapeultra6527 Місяць тому

    💙💙💙

  • @asianmanfromasia
    @asianmanfromasia 11 годин тому

    ECU?

  • @JE-lr5nb
    @JE-lr5nb Місяць тому +1

    where's part 3 bruh

  • @pablolopez274
    @pablolopez274 9 днів тому

    Hey brother can you help me to do something I want to lit turbo on a ford scape 09xlt 2.5😅😂😂😂 I know I can make the manifold w the oem one but I need some tips thanks

  • @nitrous07me
    @nitrous07me Місяць тому

    Whatever happened to the eclipse?

    • @79thproductions
      @79thproductions  Місяць тому +1

      The videos will be out soon, I have so much editing to do for that car.

    • @nitrous07me
      @nitrous07me Місяць тому

      @@79thproductionsnp

  • @goodmatchplay1372
    @goodmatchplay1372 Місяць тому +1

    I would not recommend using a ball-bearing restrictor plate on a journal-bearing turbo you will kill it one day.

    • @79thproductions
      @79thproductions  Місяць тому +2

      I've been running mines like that for 5 years, no problems.

    • @fredmorse899
      @fredmorse899 Місяць тому +1

      @@79thproductionswhat would be the danger of making the restrictor hole bigger?

  • @GIIT3G
    @GIIT3G Місяць тому

    turbo specs?