Ignition coil, spark plug wire & cap REPAIR!
Вставка
- Опубліковано 18 чер 2020
- If you have a spark plug wire or spark plug wire cap that has come off. No problem. I will show you the repair. You can replace your coil cap or wire easily
Ruckus CDI coil combo:
www.rollingwrenchdenver.com/p...
NCY ignition coil:
www.rollingwrenchdenver.com/p...
NGK Performance spark plug wire:
www.rollingwrenchdenver.com/p...
Replacement ignition coil:
www.rollingwrenchdenver.com/p... - Навчання та стиль
That just happened to me last night changing the sparkplug on my 4wheeler🤦🤦 i call the dealer thinking i messed it up they want $200 for a stock coil and this whole time i just had to twisted back in.....great video saved me time and money
I hadn't changed the spark plug ua-cam.com/users/postUgkx-6W-PtUzBRTmACHywsECak2ToY2OpjxN in my Toro 20" Recycler in the 6 years I've had it but have been good with all other maintenance. This season I noticed it sputtering a little bit every so often and just didn't feel like it was running as smoothly or as powerful as it used to. Switched out the spark plug for a new one yesterday and could immediately tell an improved difference. So I may have to make this a little more regular than every 6 years, especially for a $5 part!
Thanks! Bought a replacement ignition coil for my Echo blower but part came with out the spark plug adapter. I didn’t want to just splice it so because of your video, I now know it’s twist and pull! Thank you VERY MUCH
Thanks a lot! I'm in the process of restoring an old honda cub and I've never worked on motorcycles before. I pulled out the spark plug cap and wanted to change it, then saw this stupid wood screw inside🤣 luckily I found your video and now the cap is back without any issues.
Appreciate you putting your knowledge out here. Can’t wait to see this 232 turbo Ruckus
How many people bought a new spark plug wire because they DID NOT watch your video? Awesome job!
Seriously man, I was going crazy trying to figure this out! Thank you! Long story, but messed up my wife’s Honda Recon spark plug wire
That unscrewing trick did the job. Thankyou! Back in the saddle again
Bro!!! I've never seen that!! Thank you so much!! I've been installing spark plugs and wires my entire life and never knew that!!
Man you just save a lot of money thank you 🙏🏽
Wow. I needed this! Thanks. On my 2004 Honda trx it came Off around 3 years ago. Its been in the garage since then…..
Sweet thanks this helped my fix my mad dog the stupid coil cap kept falling off so I replaced just the cap thanks to this video awesome job
Holy shit. This saved me from panicking. I thought I had to get a mechanic to look at my bike. I was just doing a plug change and all of a sudden I had a wire end in one hand a the plug cap in the other. 😂
So helpful. Stopped me in my tracks yesterday. Thought I destroyed it using too much effort, Already ordered new ignition coils, but now I don't have to wait for them to arrive to get my bike back running!
Man, thank you so much. Just saved me 80 bucks because mine popped off and thought it broke on my Crf450r.. Thanks again!
Glad I could help!
Omfg i was looking everywhere on how to do this and couldnt find a video so my local guy was nice enough to show me so glad you put this video up!
Thank you so much I was changing my spark plugs on my sled and I accidentally pulled a little to hard on one of the caps and it separated from the wire and I plugged it back in and really hard. I wasn’t sure if I had to re cut and crimp the line or get a new one thank you.
Thank you. You made it easy to understand especially with your props.
Hey how can I tell if my clutch on my taotao 50 going bad. When I pull the throttle the power drive is not there. it feel like a drag and the scooter is hard to start I just hear the torque motor spinning. I did the valve adjustment and all the ignition part I replace........idk if the bad clutch effects the starting
Just a question pls bro. My bikes coils dont test on the secondary leads but freaken starts bike. How is this possible lol
So true . Must get checked the connection btw them .
Sparks any fail , No engine runs.
When is evi available
I have a 1990 xr100. Do you know if the coil wire unscrews from this coil also. Are any hard wired? I can't seem to remove it. Thanks
Questions is the sym shark 150cc is a Gy6 engine too do the rear wheels shark 150cc fit to a Gy6 engune like mine
Hey man whats up I got a quick question so I have a atr harness on my ruck I bought ur gy6 cdi coil combo and my question is the 2 plugs on that the coil connects to do I just cap it hide it? And does the head of the coil detach so i could feed it thru a hole?
Thanks you so very much. Saved me a trip to the stealership.
Thank you for this video!!
Random question, what are your thoughts on the TNT clear spark boots?
And do the ngk spark boots, do the plugs need the but end to fit into those? My ngk plug shows it on the box, but the plug didn’t come with it. Lol. So I had to buy one separate.
Thanks, also Matt.
fantastic!! I just bought a universal coil and thought uh oh... but not now thanks!
Hey this is a little off beat but is there a way to tell when you need to change rear break pads ? Mine ain't squeeking but they are a little weak.
I just bought NGK spark plug wires for a 2021 Benelli tnt 135 and tried pulling the stock wire out of the solenoid but it seems that it is all one piece. Do you know if that is the case with this bike. Do I just really force it out or will I have to use a splicer? There are not alot of videos for this bike out there. Thanks.
Hi Mat.
I have a Chinese gy6 150 2014 Velocity scooter that I got from a friend two weeks ago. I have a problem with the lights (head and tail) only going on when I use the breaks, horn, blinker, hazards and, when I start up the engine for 10 seconds or so. Do you know the cause of this problem and, what I could do to fix it?
Thanks,
Sunny
What advise would you give someone looking to buy an ice bear Japanese moped 150 cc who would love to do upgrade like your black monster ?
What about if the plug won't stay plugged in?
Not the cable separating, but the actual plug falling out?
Anyway to fix, or just replace?
Are these ignition wires and caps interchangeable with other bikes? I have a Honda CRF50 I need to replace the ignition cap and maybe the wire on.
Lookin for taotao racer 50 upgrades, do you do any.
so I have a spark plug wire on my cub cadet lawn tractor, and it’s clear that the cable is just too short so when you pull the boot off, it feels like you’re really stressing the cable and probably causing a connection issue. I’m gonna look at it, but do you know if lawn tractors can be adjusted this way? Maybe I could buy a longer coil cable… even though I replaced the magneto/coil/boot, I still I have starting/stalling issues - they design them so dang short that they get a short inside super fast…
Great video. Wish you had the coil and wire kit for a 1993 Kawasaki Vulcan 750.
Well, I was really hoping to find out how to keep the cap from coming loose. My Adly wire flexes with each movement of the rear suspension and causes the cap to eventually fall off. I've tried stabilizing it with a few loose zip ties along its length and also gluing in place with silicone, and yes, I've trimmed the wire end. It only has 7,100 kilometers but was ridden 2 up often and I'm sure it flexed a lot. I've been thinking of a crimp on end, even if it's 50's style with no boot, as the sudden repair is getting old and soon I'll have a short wire.
I know this is an old video, but I have a couple of questions. I recently was changing my spark plug and this small thingamagig fell out. I researched it and discovered that it was some sort of resistor. when I tried to put it back into the boot, it kept falling out when I tried to put the boot on the plug. is it suppose to be attached somehow in the boot? when I look inside, I just see a small spring. plus, is the boot suppose to pliable instead of hard? Thanks, if you ever respond.
Can someone help me? My Yamaha Vino YJ125 spark plug has brass thing in spark plug boot. Does not appear like automotive style clip. You push onto the spark plug threads, click, click, click, like spring loaded but keeps falling off spark plug. Inside the boot, it looks like someone has been doing a bad welding job on the brass. I don't know what to do here.
What about when the metal inside the cap that the spark plug goes into comes out
Thanks, appreciate the tips.
i am 2 parts away from having a brand new(parts,400$ ive spent) 2011 ETON my exhaust and battery will be here any day,ive spent so much on it and i should have a mechanically new machine,i even drained the fluids that was in it to start fresh,ughhhh cant wait
Anyone know if I can do that with a Yamaha wave runner. I got a cheap coil kit doesn’t fit. The plug wires are the bad part rather get 30$ wires than a 170$ kit
Is the Gy6 always battery operated
What No Way I Never Knew That Wonder If My Old NGK Wire Is Still Good Bet CDI Is Bad Glad I Kept It !!!
Saved me some money. Thank you
You just saved my ass. Thanks for the info.
Can this be put on any bike
Hey thank you,i had thought i breked my wire.
Why won’t my spark plug boot snap on the spark plug that came with it? What am I doing wrong. I’ve done 10000 cars but this is messed up maybe
What's Killing the Brand New Coils on my Yamaha 125 Dirt Bike!?
It would be so dope if you did some videos on the Kawasaki z125 🙏🙏🙏🙏🙏 especially an oil cooler installation please!!
Thanks for breaking it down Barney style for the slow ones in the back like me
Thanks so much
Dude. Thank you😂
Why do these 50cc Chinese mopeds have problems starting? I've got to keep pulling the spark plug and prime it to get it to run. I've changed the petcock. Then I put a manual petcock on it. I also put a new carb and choke on it. It just won't pump fuel on its own until it's running. Can an electric fuel pump be used on a taotao thunder 50?
you need a fuel check valve.. keeps the fuel from running back in the tank. its on the ruckus stock I believe, but some things on chinese units keep the costs low, and you can upgrade the things most important to you. Like.. that check valve wouldnt be important if you were say, a person that rode that exclusively and delivered food, stop after stop. The fuel wouldnt have time to run back so far. so cost savings.
@@bladerunner198306
I'm not sure what you mean. The ruckus fuel tank is down low and the fuel needs to be pumped up. On a taotao the gas tank is high on the back and gravity fed down.
Been doing this for years bro.i run MSD boots on all my scooters.if you don't put a quality boot with a standard spark cap it will rattle apart because cheap boots have that stupid thread grip junk on the end.iv been there and done that.
Thanks
Thanks for the help
Is it good practise to replace the cap each time you fit a new spark plug? Or is that overkill?
Overkill. The cap should last a lifetime.
So goods news is I didn't break my bike when swapping the spark plug. The bad news is I still don't know why it won't start.
Please make video's on custom z125's!!
Good look was about to buy a new coil lol
Part number spark plug wire ? Advance
Nice~~~
When will the EVI be back in stock? It's been sold out for a while now and I need one bad brotha
They are available for pre order now :-)
Rolling Wrench / caught it yesterday and pre-ordered with the Spark Plug. Thanks
That was cool brother enjoy the videos as always 👍👍
30 bucks for a single solid core wire?!! Naw playa I'll just buy some by the inch! A lot cheaper!
Part number ?
I m manufacturing plug cap 90 degree L bo type
I can't believe that you had to make a video about this.
You have to learn some how :-)
Rolling Wrench I have a GY6 Chinise scooter 50cc just put a big board kit 80cc what kind off sliders should I put on
How else would anyone know that they are supposed to come apart? I didn't. It's an easy failure point too.
Where have you Ben broski I bet your busy doing scooter sports
Suuuper busy lately. I have some good stuff up my sleeve :-)
Is there anyone that sells scooter kits? Where you can somewhat select the quality of every partof the scooter you put together yourself and not worry about faulty workmanship as somany of these come in a box completebut with faulty parts and poor quality workmanship out the gate.
🤗 👍 ☝️ 😎 🇵🇭 Niceone KaMotoFriends 🤗 Thanks for sharing 🤗
Hi
Omg I thought my coil was broken 😭
Hi my friend!
I saw you make a Monster,but if you're gonna make a monster..I say ACTUALLY,MAKE,A MONSTER...what do I mean,mold your own case,2 cylinder engine for a mini car,not sure how legal it would be but it would be yours, literally from the ground up..I seriously wonder why nobody has made one yet..just a SICK ASS LITTLE SPEEDY mini car with a tad more power than a scooter,so you can get around in all conditions
Not one of those ridiculous looking rolling windshields half scooter things,I mean a car,not a go cart either,a bit more on road and serious,but with simple tech
this makes no sense?
It doesn’t? Huh…