HOW TO Replace A Spark plug Cap

Поділитися
Вставка
  • Опубліковано 14 жов 2024

КОМЕНТАРІ • 51

  • @Developing_Disciples
    @Developing_Disciples 2 роки тому +1

    Thank you sir! You have helped me through my first carburetor clean out/service! Tis almost 2am now, I will fire it up tomorrow and see the results!

  • @Jaggie1651
    @Jaggie1651 2 роки тому +1

    thanks Roy I needed this video as I have one of the metal plug caps to do many many thanks

  • @PCSGIRLS
    @PCSGIRLS 5 років тому +1

    I had an 83 320i and the spark plugs use to pop off. lol it was the craziest thing. of course this video wasnt around then so I just had to figure it out. thanks for sharing

    • @roystheboy
      @roystheboy  5 років тому +1

      your welcome thank you for sharing

  • @Aaron_
    @Aaron_ 5 років тому +1

    You're quite intelligent / clued up on this stuff. I'd have no clue so thanks for the video. All the best!

  • @RogerSmith-n1c
    @RogerSmith-n1c 2 місяці тому

    Great video so simple but not if you don't know how to do this

  • @blutey
    @blutey 2 роки тому

    Thanks for that. Cylinder no 3 had gone dead on my mc and pulling off the plug cap and cutting
    back to fresh wire seems to have fixed it, fingers crossed. Wouldn't have known what to do before
    seeing this video and would have had to take it to the repair shop with all that incurs.

  • @ChristopherBlakeMarsh
    @ChristopherBlakeMarsh Рік тому

    Thanks for the great video, just what I needed to get my sled up and running !!

  • @BrendaGsDesigns
    @BrendaGsDesigns 5 років тому +1

    Thanks for coming to my live stream tonight. It was great to have you in the chat. I hope you had a good time and gained some support. Looking forward to doing it again next week! Thumbs up on your awesome instruction vid my friend. oxox

    • @roystheboy
      @roystheboy  5 років тому

      Thanks very much it was a great stream very funny

  • @Maximus43968
    @Maximus43968 5 років тому +1

    Very nice my friend look forward to the next one

  • @TRNyerereX
    @TRNyerereX 5 років тому

    Thanks for sharing all information ℹ️ I didn’t know how or if I could do that before you shared this with us , great job family

    • @roystheboy
      @roystheboy  5 років тому

      thank you for watching im glad it will help

  • @s-s-p704
    @s-s-p704 5 років тому +1

    Tips tricks and handy hints👍👍

  • @ARTCOLEVLOGS
    @ARTCOLEVLOGS 5 років тому

    Thanks for sharing my friend!! I'm not a big mechinal guy but I love to see how I can fix things my self thanks for sharing!!

    • @roystheboy
      @roystheboy  5 років тому

      your welcome thanks for watching

  • @normsmowers4758
    @normsmowers4758 5 років тому +1

    fantastic Roy thank you very much keep the videos coming mate

    • @roystheboy
      @roystheboy  5 років тому +1

      Richard Norman you’re welcome

  • @x4dd
    @x4dd 2 роки тому

    Great vid....wondered how I could change the metal connector. Mine was all rusty inside and the reason my mower was hunting now and again 👍

    • @roystheboy
      @roystheboy  2 роки тому

      Just use a small screwdriver or a needle file should do the trick it's not easy to change the connector

  • @Santiago-je5ki
    @Santiago-je5ki 4 роки тому

    quick simple explanation, you got a new subscriber!

  • @shedmade4452
    @shedmade4452 5 років тому +1

    Love your how to videos Roy. Even though I can do this easily I enjoy watching them. Thank you

    • @roystheboy
      @roystheboy  5 років тому +1

      SEB. Repair thanks mate I appreciate it

    • @roystheboy
      @roystheboy  5 років тому +1

      no thank you for watching

  • @MissBELLE003
    @MissBELLE003 5 років тому +1

    I have a knife I can’t close I opened it and it’s stuck what would you recommend? Do you think WD40 would work ? It’s lock in good!

    • @roystheboy
      @roystheboy  5 років тому +1

      yes spray some on it and leave it for a while and it should make its way loose

  • @Lucky7MudMowers
    @Lucky7MudMowers 5 років тому +1

    Today is your lucky day . I picked your UA-cam channel to watch all of your videos. Well i'm at work. You will get one more view on all your videos, I'm Playing all videos to show my support. Lucky 7 Mud Mowers

  • @dpm1964
    @dpm1964 2 роки тому

    Great video and explanation. Thank you.

  • @mattheels166
    @mattheels166 Рік тому

    Top vid thanks roy you covered everything 👌

  • @Jhonasvlog
    @Jhonasvlog 5 років тому +1

    Hi thank you for sharing this

  • @stepscoun48
    @stepscoun48 5 років тому +1

    Hi, Roy's. I came over from TR Nyerere live channel to show some love and watch videos. Thanks for sharing your video on 'How to change a sparkplug cap'.

    • @roystheboy
      @roystheboy  5 років тому

      DianeDeeTrying thank you for watching

  • @ahmedm6041
    @ahmedm6041 3 роки тому

    Thanks for sharing your knowledge mate!👍

  • @Splinternut
    @Splinternut 5 років тому +1

    Heeeeey! Thanks for the hack! I appreciate the valuable information!

  • @QueenCityPicker
    @QueenCityPicker 5 років тому

    Great video! Thanks for sharing! Thumbs up!

  • @JimmyCandFriends
    @JimmyCandFriends 5 років тому

    Nicely Done Roy👍✌

  • @lildumplin9905
    @lildumplin9905 5 років тому

    Very good video new friend

  • @Firecajun9262
    @Firecajun9262 5 років тому

    Great info, looks too much like work for me. Lol Thanks for sharing

  • @BossyMe
    @BossyMe 5 років тому +1

    Impressive! Lol, this is completely foreign to me!

    • @roystheboy
      @roystheboy  5 років тому

      it's more easy than you think

  • @Mtbethan2008
    @Mtbethan2008 3 роки тому

    Thanks

  • @MindGarden
    @MindGarden 5 років тому

    New here, saw ya in chat this morning.

  • @CarpyChris1964
    @CarpyChris1964 5 років тому

    Cool bro

  • @CraigoryAbbit
    @CraigoryAbbit 3 роки тому

    🤙🏾 ...

  • @dukesworld3020
    @dukesworld3020 5 років тому

    Good deal!!!