Cheap Chinese knives for METABO DH330 work just fine 2020
Вставка
- Опубліковано 27 сер 2024
- Cheaper Chinese knives Blades for METABO DH330 work just fine 2020
After buying original Metabo knives for 90e Chinese offerings for under 20e is a NO-Brainer.
LT-TOOL, 2pcs 13" Thickness Planer Blades Double Edged Knives 333x12x1.5mm For Delta 22-580 22-590 TP300 (Size : 333x12x1.5mm 2pcs) amzn.to/3k6JCfb
DEWALT 13-Inch Thickness Planer - Three Knife, Two speed, DW735X model amzn.to/2Gsj2Oo
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Wow, it's an honor to see the planer blades from our factory
That's pretty cool xxx
great vid,in the booklet it states you get a special tool to change the blade,mine is missing and you never used one,did you get one
How are you finding the knives after 2 years buddy. ill be looking new knives soon so very interested in your thoughts
They're fine but I did upgrade the clamps xx
@@WallyboisWoodworking oh I didn't know that was possible.
What did you upgrade to buddy
@@celticwoodreations I replaced the pressed knife clamps with flat bar machined with a leading edge bevel and back... It stops the chips getting jammed in-between xx
Hi it’s Nick9toes 🏴 I was going to buy a Malabo thickness but I backed out after I saw your problem I am thinking about it and I have to ask how much snip do you get from yours. Thanks nick 🏴👨🏻🌾
Very little since the rollers are close to cutter block xxx
You've not had that long have you? My Axminster planer has runs thousands of boards and its still on the original knives.
I do work with hardwoods. The spare knives came so I thought it was a good opportunity to make a video! Do you have trouble with the chips getting stuck behind the knvives?
@@WallyboisWoodworking I also have the Axminster one, in fact i have had it 14yrs now and never had any chips stuck behind the knives. :)
Can I ask... how much oak have you put through this? I'm just about to buy one of these as I need to make floor-boards for new (petite) workshop of 20 sq M from a really cheap supply of live-edge boards I can get from local farmer, and I would assume that's going to be a piece of cake for this machine? And lots more boards to do after that...
So far I have planed about 2 cubic metres of oak wide and narrow boards.
@@WallyboisWoodworking Cool. Cheers!
@@WallyboisWoodworking Just to update, I bought the Metabo... just run 150 board meters of chestnut planks through it and it's still cutting as well as the first board. So up to date very happy with it.
hey wallybois. I got a problem here which the manual can't solve. I got solid reason to believe that the voltage relay system has turnt off due to too low voltage provided to the machine. (its a safety measure so the machine doesnt turn on all of a sudden when enough voltage is provided again). It's not the overheat button, I checked. But the machine won't turn on anymore. Do you happen to know the location of this relay and how to turn it back on? because I heard that typical relay click, so I'm pretty sure this is the issue. Also contacted metabo. Really annoying though that the manual doesn't provide any information on the location of this relay...
The relay wil be near the switch
@@WallyboisWoodworking yeah that was my thinking as well, but as it turns out you simply have to press the on button, that should enable it again.
I think my carbon brushes are toast, will check. not sure what to check for tho. They should be intact but I wouldn't know what they look like intact. they're 40 bucks pff@@WallyboisWoodworking
hey wally, so I've had my machine fixed, it turned out to be power supply cable. yet I couldn't measure continuity on one of the cables, as it went straight to the heart of the motor, machine had to be completely deconstructed in order to get fixed. I think what happened is that I've tried to set the machine too high and then turned it on, so watch out for that.@@WallyboisWoodworking
@@thijs199 thanks buddy 🤠
You have said that you've purchased Chinese knives for 20 Euros. Your link directs to Amazon and one pair of planer knives from them are £ 38.00 which still seems rather expensive. How did you manage to purchase 3 sets for 50 Euros? Thanks.
might be because my Amazon account is registered to a different country to yours, if that is the case I think Amazon chooses a near match. I'll see if I can find you a better link, what country are you in? Thanks for letting me know
@@WallyboisWoodworking Thanks for your reply. I live in Great Britain. Would be nice to find these planer knives a lot cheaper than £38 for a single pair. Cheers.
Hello Marcus
I fixed the problem with sawdust and chips stuck under the knife.
Here are photos on the solution:
arad.cell-dent.hu/pages/dh330
Cheers
Adam from Hungary
Some of us would also like to know. I sent my machine to a service and they provided 2 new backing plates and said metabo knows about backing plates bending but there are too few complaints to change design or make stronger plates.
That is naughty! I have a few ideas on how to improve them or make some stiffer ones. On my machine it is always one that bends the other is ok, regards
Thanks I'll send ot to you
@@WallyboisWoodworking Hello guys, I just uploaded some photos to my website. You can see how I fixed the problem.
arad.cell-dent.hu/pages/dh330
@@adamelekes Nice. But does this mean you will have to drill every new blade you put in?