Just bought a DJI inspire 1, customer care was amazing. They followed me trough the process of set it up. 15 years after, this is still a great drone!!
I want one. I also really like that the negative comparisons he made was to other products by his company....instead of using it as an opportunity to trash talk competitors. That's a classy way to handle it.
I've been watching these for a long time... I'm really impressed with the improvements made here, specifically regarding the lack of lens distortion... THAT is a great selling point, along with the ability for the camera to descend below the rig in flight... absolutely headed in the right direction.. thank you for sharing. Very informative... A+
18 minutes is long enough. Rarely any film maker shoots a shot that's 18 minutes long. Instead they do consecutive small shots. For that, this device is fine.
The real question is whether or not they used a 27 axis gyroscopic sensor instead of a typical ≈9 axis gyroscope. Usually it makes a huge difference with the stability control.
Quadcopters and gopro cameras or equivalent are a unity made in heaven. The perfect match. The quad is the best platform to best display the ability of this HD camera technology. Its advancement using GPS, HD, and quadcopters is giving the world footage that was impossible a few years back. I love this technology and what is giving to Aerial Imaging. We all benefit.
I did some work with a Phantom 2 this summer, I really hope I can get my hands on one of these eventually. Looks fantastic, and I love the idea of being able to hand camera controls off to another person.
I was told that you have to do computer up grades from time to time with the Inspire. Which means if the state you live in decides to make quads illegal to fly, DJI can disable your Inspire. Any thought on this. I would hate to fork out 3000+, only to find out it has been disabled.
It would be cool if they could have a head mounted display and the ability to control the camera with head tracking. It's an amazing piece of gear, though.
Jose J P Even with Timewarp and other software tricks you are gonna have a bad time with wireless signal transmission. There is currently no live camera system (even wired!) that is suitable for VR. Also remember that you want a very high frame rate; 75hz for DK2 and probably 90+ for the first Consumer Kit. But you could create a 3d computer environment from the data you get and just interact with the drone virtually. But thats probably a few years out, as it need much better hardware and software.
***** oh god I was about to write about the same idea without reading your comment, it seems very plausible but needs right people to share same idea and work together
0:48 Why does the camera gimbal shake so much while transforming? Being able to have straight horizons is a big plus. 16:03 I love this zipping-shot. Give it a name. Make it happen. :)
excelente la tecnologia del inspire!! felicitaciones!! pero igualmente tengo mis criticas, espero no se tomen a mal, noto que el cardan gimbal es desproporcionadamente muy largo, con lo cual la palanca transmite mucha oscilacion,(min 0:48 , 2:13 )y no esta en el centro de los ejes como deberia.ademas el tren retractil ( es una maravilla tecnologica) pero pone en riesgo la camara en caso de aterrizaje de emergencia y los niveles, equilibrios de los motores es una de las partes mas sensibles en multirrotores como para estar subiendo y bajando continuamente.igualmente es una maravilla. un abrazo.
I have been a DJI phantom 2 user and I know how dangerous the rotating blades are when not enclosed with rotor guards. Also the guards do help to protect the drone and the blades from damage in cases of awkward landings that tilt the drone on its side. So my next question is with the Inspire the blades are not guarded and will cause some serious physical wounding to a persons face and exposed limbs. Also, if in the unfortunate situation arises when the Inspire comes in contact with say tree branches or a solid structure I hate to think what will happen to the blades and the motors. Lets look at the landing gear: The Phantom 2 has its under-carriage always safeguarding your camera (say the Go Pro and gimbal). Now in the case of the Inspire 1 if and when you have a emergency landing or even worst a collision with the ground I cannot see the under-carriage coming down in time to save the 4K camera and attachments. What do others have to say?
BlenderLager I hope you are right and I am wrong. The pilot is responsible for his/her own safety and the safety of others. However flying any quad in an environment that the pilot has no control over errors will be made. I think the safest way yo fly the Inspire isto have dual controls. Solo beginner pilots need to fly smaller quads and clock several hours of flying.
Well The Inspire 1 will be one mother f#$% head ache.DJI are a little out of thier minds The camera wobbles like crazy and when the people start complainings snd wanting service,It will be a compete failure.Dji can barely keep up with the phantoms........thx
This thing is amazing !! you guys should try to find the guys that did the quad copter that actually can follow you on its own with out any radio ! just uses a wrist band to the owner or who ever you want to film and you turn it on and go have fun and it will follow you and let you know when the battery is low. Would love to see some detail on it !
If you are in a moving vehicle (car or boat), can you set it to follow you at a set distance and height away from the moving vehicle, so you don't have to worry about steering it?
Being part of a large RC pilot group keeps me in the loop on new product reviews. Of late many members of our multirotor pilots are in constant debate regarding the DJI Inspire 1. This is a diverse group, so one might take production videos of sporting events with gimbals and cameras while another might be inspecting his corn fields using preprogrammed flight plans with goggles and long distance video feed. Just as the initial excitement is waning this past 2 weeks, many serious problems started surfacing. There is now an overwhelming consensus that the Inspire 1 design is inherently flawed, that there are multiple vibration related structural and mechanical elements that can not be fixed without a major overhaul. The signature "T" shaped lifting arms that inspired the initial praise has turn into a curse. While engineers place the blame on compounded torque form two motors on opposite ends of a "T", multirotor integrators agreed that lifting mechanism (usually reserved for skids) should not have found its way to hold up right angled arms with a high speed motor at each end. By the end of last week all have cancelled or called off their Inspired commitments ..... for now.
As I look closely at many of the Inspire One videos, the quad is constantly struggling to find equilibrium. Quadcopter rotors are suppose to maintain perpendicular alignment that's firmly anchored to the main frame. The Inspire One's "T" arm design is neither, resulting in a front and back rocking motion that wreak havoc to sensors responsible for stabilization.
My local hobby shop hangout is heavily discounting the first Inspire 1 shipment that's coming in. "No returns" is the caveat. Even if they can get rid of them, the service and complaints is going to be a horrendous headache. Looks like the step motors for lifting the arms are too flimsy to handle the tremendous force and vibration of the rotors.
I was on the fence about the Inspire 1 before this video. Eric Cheng is the DJI Master. I have a Phantom II and can totally justify spending 3k on the Inspire 1. I think the s800 and s1000 are great if you have a GH4 or 5D MIII but the complexity and expense are just not practical for most DJI Pilots. I love the sonar (Optical Flow Technology) ground tracking feature so you can fly in a more fragile environment. I could fly this down the interior of a small jet or in a yacht with ease.
The Poles used one of these to film a ski descent of K2 - second highest mountain in the world. Now that's impressive - it's above the operating range of most commercial helicopters.
I wonder if this has the "return to home' feature that the DJI Phantom 2 has? I would like to see a longer flight time. Also I would like to see the landing arms come down in an event of you having to land it without damaging the camera. Note this unit does not have WiFi or Blue Tooth as the DJI has.
DJI engineers screwed up by putting 2 motors on the same arm. On top of that both of these unstable arms are mounted on retractable servo hinges. Basically combining 2 fatal errors in one design and there is no way to fix it. The resulting vibration is especially bad for videos when there is any moderate velocity or wind. DJI must have waited for the perfect day to fly, cut out 90% of the bad video and post edited for days to get a few seconds of usable footage.
18 minutes flight time with the "special DJI" battery is not impressive at all and is a big downfall of this machine. The camera being used is pretty nice with the 3 axis gimbals. Although being nice, it definitely isn't nice enough for the price. You could scratch build a machine which is way better for far less money.
Only maybe if you dropped the lightbridge for hd fpv - thats worth about $1400 by itself. Otherwise, I think its pretty competitively priced for the features you get (the proprietary battery is unfortunate of course)
Zapf Granite How long of a flight can you kids get with the weight of a reasonable sized camera? I had thought 18mins is good, not bad. Maybe you just don't like current battery technology, rather than think this has a horrible fly time in relations to others
Granite Not to to mention the 5700 mAh battery is 200 bucks! That's insane. I've always said that DJI is the Apple of drones, crazy profit margins and both generally make people dumber in the long run, as they don't know what their device does or how, at all, "it just works". It's both a blessing and a curse IMO.
***** And bout the flight time; cut weight, get large, efficient props and efficient motors (specs detail lift in grams per watt), and a big battery to boot and you'll have a really nice flight time. It's a real race against physics. Examples of 2hour flight times with a 4kg quad with 100kv motors, 28inch props and 24Ah batteries are abundant :) people have even made their own li-ion packs from 18650 cells off laptop batteries. Really cheap.
Can I just have that camera for the DJI Phantom 2+? Makes me wonder what the camera specs would on the next model of the DJI Phantom series. I just want to use this system for aerial still shots for landscape work. Would the image quality be worth the money?
I hate you guys... great you showed us the Inspire 1, tested talk and play with it... now I want one but don't have the money! ha! Guess will keep building mine till I save enough to buy one! thanks guys! Nice to see Adam and Will both like a little boy`s enjoying the tech in this machine! Ed
***** Well I like to spend $2,899.00 in other stuff. Not only one a single quad. You can buy as many as you want with your own money! So GOOD FOR YOU! Enjoy life pal! Ed
rifted Well, the Canon 5D Mk.III went into the market with a $3500 retail price for the camera body alone, so really... This being a product for professional use, it actually has a pretty competitive price i'd say.
NagaTen Just a high end off the shelf all in one, great for rich kids with no technical background , You can get better for the money if you build your own from parts . the 4k camera included is nothing special . It is a good price / spec for some professional use. I doubt Michael Bay would be using these though
Yes it could be a high end off the shelf as you say, but it is a nice design and Tested where able to get a review before it sells on the shelf's! lol Also if you are into building your own stuff it might not end looking as this one but HEY! Every one is proud of each creations right? :-)
NagaTen yea! it is pretty competitive to be true! plus its out of the box nice design and probably in the near future the price will drop... (when there is a newer one lol)
Very interested in this quad. but my biggest concern is those firmware upgrades... how often have to do this? I'm traveling the world and often without internet. this could be very inconvienient... also flight time... kinda on the short side... my next choice probably is Matrix from Turbo Ace. no upgrades and 47 minutes flight time... Thank you.
Can you add the 2nd DJI Inspire 1 transmitter (for 2nd person handling video capturing) at a later date without any software update? Do you need to sync the 2nd transmitter to your exisiting unit? Thanks.
Curious if this model's camera is able to track a subject via transmitter. In other words the camera will just follow the subject automatically as the operator focusses on flying.
I like it, but i'm not sure about the legs. Maybe move the camera up and down instead? It does look like it lowers the center of gravity though probably resulting in more stable flight.
Eric Cheng: "It also drops the center of gravity below the props; it's a little bit more stable that way." That seems like a version of the "pendulum rocket fallacy". The only ways it seems like this might actually help stabilize the quadcopter is by increasing the moment of inertia (and sorta damping out fluctuations) or by changing the center of pressure. But there shouldn't be any magic stability added from moving the CoM down. (Caution: I am not an engineer.)
I fly Quads and I am building a Tricopter. I think any benefit gained by a lower center of gravity is wasted on the extra weight added to run this system.
Is there a quad copter out there that has a camera and gimble like this, but with out the fancy inspire drone? I would be happy with the dgi phantom 1, but I want that camera. Go pros have to much distortion.
It's very simple. You get into your car, or bike if you do not own a car, drive to the nearest store and purchase a 1080p projector. Success guaranteed! Plus you'd feel good knowing that you supported a company that has families to feed.
I've noticed all of the video footage from the Inspire 1 is not smooth, but micro stutters. Will this be fixed? Also, the cost of the battery will be a deciding factor in considering this purchase. I've seen this battery selling for $500 on Ebay. Hopefully the cost will be well under $250 otherwise the operating costs will be too high.
There's been a lot of complaint with Inspire's 18 minute flight time because many professional applications require at least 30 minutes for extended inspection and longer distance missions. Another issue is that you are stuck with the built-in camera that comes with this Chinese drone. In contrast, the U.S. developed Matrix-i I'm currently flying offers over 50 minutes flight time with a small hard mounted camera (If I added a 3-axis gimbal plus either the Hero4 or the TAU 2 thermal imaging camera, the Matrix flight time drops to about 47 minutes.) not bad for a mid-sized foldable drone that uses either a 16,000mah or a 22,000mah 6S LiPo. The key is weight, Matrix's extra rigid frame and 15" propellers is forged entirely from carbon fiber and aluminum leaving lots of payload to support huge batteries.
Looks very cool. But from an engineering standpoint, I have serious concerns about a lack of stiffness in a frame with two articulated single booms. There is no way that frame does not have a substantial amount of torsional flex or slop. You've got bearing clearances and CF tube couplers all working against you here. It seems far better to keep the motor/prop plane as rigid as possible, and just articulate the landing gear. Form follows function - not the other way around. I suspect that DJI has ignored that rule.
I just want one that I can fly around my city from home so I need one with the furthest range and longest battery do you guys have any suggestions for me
Such a gorgeous quad and awesome feature set. Still, I personally don't want a pre-built carebear quadcopter, because I want to learn what makes them tick. So I got a David Windestål Tricopter V3 and a Red20RC H220 racing quad projects to build over the winter :)
For the latest DJI products, go here: www.dji.com/
Just bought a DJI inspire 1, customer care was amazing. They followed me trough the process of set it up. 15 years after, this is still a great drone!!
I want one. I also really like that the negative comparisons he made was to other products by his company....instead of using it as an opportunity to trash talk competitors. That's a classy way to handle it.
I like this guys workspace, no-face from spirited away, rocket raccoon, r2d2, terminator with a straw hat, and a bunch of other cool shit.
this quad is absolutely amazing would love to have one someday
I've been watching these for a long time... I'm really impressed with the improvements made here, specifically regarding the lack of lens distortion... THAT is a great selling point, along with the ability for the camera to descend below the rig in flight... absolutely headed in the right direction.. thank you for sharing. Very informative... A+
Can't even describe in words how much I would love to have one of these.
Of all the "Inspire" preview videos I've seen this is by far the best, most informative. Love the information provided.
Very NICE Hands on. We love the DJI Inspire 1 ! Will test it as soon as possible
I kind of want to see the footage from that shot at the end from the perspective of the quadcopter
possibly the greatest review on my favourite drone!
This is a beautiful quad. I wish I could afford it. It is a beautiful design.
yes u can , go online eBay buy it used there getting cheaper for $500.
The very end was awesome - Adam "jacking" it, and then it flying away like a couple dozen yards in about half a second.
18 minutes is a very short period of time for such awesomeness
18 minutes is long enough. Rarely any film maker shoots a shot that's 18 minutes long. Instead they do consecutive small shots. For that, this device is fine.
The real question is whether or not they used a 27 axis gyroscopic sensor instead of a typical ≈9 axis gyroscope. Usually it makes a huge difference with the stability control.
Quadcopters and gopro cameras or equivalent are a unity made in heaven. The perfect match. The quad is the best platform to best display the ability of this HD camera technology. Its advancement using GPS, HD, and quadcopters is giving the world footage that was impossible a few years back. I love this technology and what is giving to Aerial Imaging. We all benefit.
I did some work with a Phantom 2 this summer, I really hope I can get my hands on one of these eventually. Looks fantastic, and I love the idea of being able to hand camera controls off to another person.
Been following DJI's work, they continue to impress and inspire me. Truly amazing
Technologically amazing. Aesthetically, the white "fuselage" is brilliant. It pleases the kid in me. ;)
The lights totally add to the effect.
Fantastic looking aircraft with some awesome features!!
I was told that you have to do computer up grades from time to time with the Inspire. Which means if the state you live in decides to make quads illegal to fly, DJI can disable your Inspire. Any thought on this. I would hate to fork out 3000+, only to find out it has been disabled.
***** ^we all now the internet. give those people 1 week and they come up with an manual software hack which enables it again
Although the state might say drones are illegal, unless DJI made that EVERYONE was blocked, it would be illegal for them.
It would be cool if they could have a head mounted display and the ability to control the camera with head tracking. It's an amazing piece of gear, though.
Imagine using an oculus rift to view and move the camera..
Jose J P The latency for that is such that you'd probably do some vomiting, even with a fast gimbals.
Tested I have hope for the future!
Jose J P Even with Timewarp and other software tricks you are gonna have a bad time with wireless signal transmission.
There is currently no live camera system (even wired!) that is suitable for VR.
Also remember that you want a very high frame rate; 75hz for DK2 and probably 90+ for the first Consumer Kit.
But you could create a 3d computer environment from the data you get and just interact with the drone virtually.
But thats probably a few years out, as it need much better hardware and software.
***** oh god I was about to write about the same idea without reading your comment, it seems very plausible but needs right people to share same idea and work together
Great to hear a bit more detail. Definitely considering one of these, but I'll wait until a few consumers report back on them.
I love this drone. It is changing everything. it is so easy to set up and go compared to my custom builds.
Excellent piece of kit! Was going for a Phantom 2, not now!!
0:48 Why does the camera gimbal shake so much while transforming?
Being able to have straight horizons is a big plus.
16:03 I love this zipping-shot. Give it a name. Make it happen. :)
It's calibrating the brushless gimbal just after lift off..
excelente la tecnologia del inspire!! felicitaciones!! pero igualmente tengo mis criticas, espero no se tomen a mal, noto que el cardan gimbal es desproporcionadamente muy largo, con lo cual la palanca transmite mucha oscilacion,(min 0:48 , 2:13 )y no esta en el centro de los ejes como deberia.ademas el tren retractil ( es una maravilla tecnologica) pero pone en riesgo la camara en caso de aterrizaje de emergencia y los niveles, equilibrios de los motores es una de las partes mas sensibles en multirrotores como para estar subiendo y bajando continuamente.igualmente es una maravilla. un abrazo.
@ 5:00 are those two men in the back ground the dudes from Mythbusters? (must be viewing it to purchase for their TV series) :)
An absolutely brilliant quad well done guys ;)
I have been a DJI phantom 2 user and I know how dangerous the rotating blades are when not enclosed with rotor guards. Also the guards do help to protect the drone and the blades from damage in cases of awkward landings that tilt the drone on its side. So my next question is with the Inspire the blades are not guarded and will cause some serious physical wounding to a persons face and exposed limbs. Also, if in the unfortunate situation arises when the Inspire comes in contact with say tree branches or a solid structure I hate to think what will happen to the blades and the motors. Lets look at the landing gear: The Phantom 2 has its under-carriage always safeguarding your camera (say the Go Pro and gimbal). Now in the case of the Inspire 1 if and when you have a emergency landing or even worst a collision with the ground I cannot see the under-carriage coming down in time to save the 4K camera and attachments. What do others have to say?
PHP:I was reading the inputs from others, came across yours. I feel you have made good points.
BlenderLager I hope you are right and I am wrong. The pilot is responsible for his/her own safety and the safety of others. However flying any quad in an environment that the pilot has no control over errors will be made. I think the safest way yo fly the Inspire isto have dual controls. Solo beginner pilots need to fly smaller quads and clock several hours of flying.
Well The Inspire 1 will be one mother f#$% head ache.DJI are a little out of thier minds The camera wobbles like crazy and when the people start complainings snd wanting service,It will be a compete failure.Dji can barely keep up with the phantoms........thx
This thing is amazing !!
you guys should try to find the guys that did the quad copter that actually can follow you on its own with out any radio ! just uses a wrist band to the owner or who ever you want to film and you turn it on and go have fun and it will follow you and let you know when the battery is low. Would love to see some detail on it !
If you are in a moving vehicle (car or boat), can you set it to follow you at a set distance and height away from the moving vehicle, so you don't have to worry about steering it?
BlenderLager my app has a feature that says follow, havent tried it yet
woah!! just woah!! awesome product. best of the best so far
0:49 - What's with the camera shaking all over the place?
Being part of a large RC pilot group keeps me in the loop on new product reviews. Of late many members of our multirotor pilots are in constant debate regarding the DJI Inspire 1. This is a diverse group, so one might take production videos of sporting events with gimbals and cameras while another might be inspecting his corn fields using preprogrammed flight plans with goggles and long distance video feed. Just as the initial excitement is waning this past 2 weeks, many serious problems started surfacing. There is now an overwhelming consensus that the Inspire 1 design is inherently flawed, that there are multiple vibration related structural and mechanical elements that can not be fixed without a major overhaul. The signature "T" shaped lifting arms that inspired the initial praise has turn into a curse. While engineers place the blame on compounded torque form two motors on opposite ends of a "T", multirotor integrators agreed that lifting mechanism (usually reserved for skids) should not have found its way to hold up right angled arms with a high speed motor at each end. By the end of last week all have cancelled or called off their Inspired commitments ..... for now.
As I look closely at many of the Inspire One videos, the quad is constantly struggling to find equilibrium. Quadcopter rotors are suppose to maintain perpendicular alignment that's firmly anchored to the main frame. The Inspire One's "T" arm design is neither, resulting in a front and back rocking motion that wreak havoc to sensors responsible for stabilization.
My local hobby shop hangout is heavily discounting the first Inspire 1 shipment that's coming in. "No returns" is the caveat. Even if they can get rid of them, the service and complaints is going to be a horrendous headache. Looks like the step motors for lifting the arms are too flimsy to handle the tremendous force and vibration of the rotors.
this is insanely great i loved it soooooooooooooooo much
Looks like something straight out of Portal 2. I love it
the drone is amazing but... those guys are standing in the most awesome room ever >.>
Most amazing drone in the market today :D
I was on the fence about the Inspire 1 before this video. Eric Cheng is the DJI Master. I have a Phantom II and can totally justify spending 3k on the Inspire 1. I think the s800 and s1000 are great if you have a GH4 or 5D MIII but the complexity and expense are just not practical for most DJI Pilots. I love the sonar (Optical Flow Technology) ground tracking feature so you can fly in a more fragile environment. I could fly this down the interior of a small jet or in a yacht with ease.
dat last bit doe... it was like the double rainbow thingy
Drool....Thats what I call a really nice Christmas gift
Does this come stock with the flip of death technology built in or is it a firmware upgrade?
The Poles used one of these to film a ski descent of K2 - second highest mountain in the world. Now that's impressive - it's above the operating range of most commercial helicopters.
I wonder if this has the "return to home' feature that the DJI Phantom 2 has?
I would like to see a longer flight time.
Also I would like to see the landing arms come down in an event of you having
to land it without damaging the camera.
Note this unit does not have WiFi or Blue Tooth as the DJI has.
DJI engineers screwed up by putting 2 motors on the same arm. On top of that both of these unstable arms are mounted on retractable servo hinges. Basically combining 2 fatal errors in one design and there is no way to fix it. The resulting vibration is especially bad for videos when there is any moderate velocity or wind. DJI must have waited for the perfect day to fly, cut out 90% of the bad video and post edited for days to get a few seconds of usable footage.
Does somebody know what is this place (the castle) at 8:50 min??
Love flying my phantom 2
I want this Drone so bad , I'll keep saving for it
Would you say customer support from DJI is much better for Inspire customers then the Phantom series?
This is straight baller mode right here.
I am as excited as I am scared of this technology!
So the clip ended with a classic DJI Fly-Away...?
Very cool, how fast can it fly?? does it have an optical zoom??
wow this is really cool! i actually have plans on building my first quadcopter here soon ^.^
18 minutes flight time with the "special DJI" battery is not impressive at all and is a big downfall of this machine. The camera being used is pretty nice with the 3 axis gimbals. Although being nice, it definitely isn't nice enough for the price. You could scratch build a machine which is way better for far less money.
Only maybe if you dropped the lightbridge for hd fpv - thats worth about $1400 by itself. Otherwise, I think its pretty competitively priced for the features you get (the proprietary battery is unfortunate of course)
Zapf Granite How long of a flight can you kids get with the weight of a reasonable sized camera? I had thought 18mins is good, not bad. Maybe you just don't like current battery technology, rather than think this has a horrible fly time in relations to others
Granite Not to to mention the 5700 mAh battery is 200 bucks! That's insane.
I've always said that DJI is the Apple of drones, crazy profit margins and both generally make people dumber in the long run, as they don't know what their device does or how, at all, "it just works". It's both a blessing and a curse IMO.
a damning conclusion Esa Edvik & likely correct .
***** And bout the flight time; cut weight, get large, efficient props and efficient motors (specs detail lift in grams per watt), and a big battery to boot and you'll have a really nice flight time. It's a real race against physics.
Examples of 2hour flight times with a 4kg quad with 100kv motors, 28inch props and 24Ah batteries are abundant :) people have even made their own li-ion packs from 18650 cells off laptop batteries. Really cheap.
Oh my god I saw the myth busters and I'm watching them right now!
7:15 " if you're shitting stills" I hope not
Impressive, the DJI inspire has every you need to fly. What will happen if you fly out of range, no body has talk about auto return to home?
Please when will cameras have a RC zoom function, or at lease toggle through the setting in the air.
Can I just have that camera for the DJI Phantom 2+?
Makes me wonder what the camera specs would on the next model of the DJI Phantom series. I just want to use this system for aerial still shots for landscape work. Would the image quality be worth the money?
If you don't like the curves on the gopro video pic....you can use the medium mode!
Can we weaponise it to fire .45 acp rounds is the question.
Yes and no. It would be extremely illegal, but you could probably mount a gun somewhere and fire it remotely.
Yes & No. Yes - you could attach one. Would it work? No, probably not. Reason, Physics.
Alex Rowe it does work. it even worked on a 400mm quad. you need a really stable frame but it does work ^^
I hate you guys... great you showed us the Inspire 1, tested talk and play with it... now I want one but don't have the money! ha! Guess will keep building mine till I save enough to buy one! thanks guys! Nice to see Adam and Will both like a little boy`s enjoying the tech in this machine!
Ed
***** Well I like to spend $2,899.00 in other stuff. Not only one a single quad. You can buy as many as you want with your own money! So GOOD FOR YOU! Enjoy life pal!
Ed
rifted Well, the Canon 5D Mk.III went into the market with a $3500 retail price for the camera body alone, so really... This being a product for professional use, it actually has a pretty competitive price i'd say.
NagaTen Just a high end off the shelf all in one, great for rich kids with no technical background , You can get better for the money if you build your own from parts .
the 4k camera included is nothing special .
It is a good price / spec for some professional use. I doubt Michael Bay would be using these though
Yes it could be a high end off the shelf as you say, but it is a nice design and Tested where able to get a review before it sells on the shelf's! lol Also if you are into building your own stuff it might not end looking as this one but HEY! Every one is proud of each creations right? :-)
NagaTen yea! it is pretty competitive to be true! plus its out of the box nice design and probably in the near future the price will drop... (when there is a newer one lol)
Those mics you're using sound great, what are they?
Very interested in this quad. but my biggest concern is those firmware upgrades... how often have to do this? I'm traveling the world and often without internet. this could be very inconvienient... also flight time... kinda on the short side... my next choice probably is Matrix from Turbo Ace. no upgrades and 47 minutes flight time... Thank you.
Can you add the 2nd DJI Inspire 1 transmitter (for 2nd person handling video capturing) at a later date without any software update? Do you need to sync the 2nd transmitter to your exisiting unit? Thanks.
I'd love to see some raw video from Inspire 1? Have you got some?
What is the Gimbal doing at 0:50?!?
Shaking violently. Lol fail.
Travis Graham Yes, it does this when the arms are moving up...
Travis Graham Brushless gimbal is calibrating, lol fail.
Curious if this model's camera is able to track a subject via transmitter. In other words the camera will just follow the subject automatically as the operator focusses on flying.
It looks awesome!!!
When they say 18 minutes on the battery, are they talking about the 129.96Wh or the 99.9Wh?
hi, i ask how to do for my drone inspire one? the trains are stuck in the stance position, but the video signal passes.
Great review - thanks! does Inspire 1 flight controller support windows tablet, or only iOS and Android? Thanks.
I like it, but i'm not sure about the legs. Maybe move the camera up and down instead? It does look like it lowers the center of gravity though probably resulting in more stable flight.
This is AWESOME!
Do you think it would be difficult to use it to 3d scan people with it?
Eric Cheng: "It also drops the center of gravity below the props; it's a little bit more stable that way."
That seems like a version of the "pendulum rocket fallacy". The only ways it seems like this might actually help stabilize the quadcopter is by increasing the moment of inertia (and sorta damping out fluctuations) or by changing the center of pressure. But there shouldn't be any magic stability added from moving the CoM down. (Caution: I am not an engineer.)
I fly Quads and I am building a Tricopter. I think any benefit gained by a lower center of gravity is wasted on the extra weight added to run this system.
I know it's outdated and it's not the best but you should check out where dji came from the phantom 1 or fc40
Is there a quad copter out there that has a camera and gimble like this, but with out the fancy inspire drone? I would be happy with the dgi phantom 1, but I want that camera. Go pros have to much distortion.
You guys could make a video teaching how to build your own 1080p projector.
It's very simple.
You get into your car, or bike if you do not own a car, drive to the nearest store and purchase a 1080p projector. Success guaranteed! Plus you'd feel good knowing that you supported a company that has families to feed.
I want one too. Hope to come fast in Europe.
Does that camera readmitted live recording?
I want one of these! No, I really want one of these!
I've noticed all of the video footage from the Inspire 1 is not smooth, but micro stutters. Will this be fixed? Also, the cost of the battery will be a deciding factor in considering this purchase. I've seen this battery selling for $500 on Ebay. Hopefully the cost will be well under $250 otherwise the operating costs will be too high.
There's been a lot of complaint with Inspire's 18 minute flight time because many professional applications require at least 30 minutes for extended inspection and longer distance missions. Another issue is that you are stuck with the built-in camera that comes with this Chinese drone. In contrast, the U.S. developed Matrix-i I'm currently flying offers over 50 minutes flight time with a small hard mounted camera (If I added a 3-axis gimbal plus either the Hero4 or the TAU 2 thermal imaging camera, the Matrix flight time drops to about 47 minutes.) not bad for a mid-sized foldable drone that uses either a 16,000mah or a 22,000mah 6S LiPo. The key is weight, Matrix's extra rigid frame and 15" propellers is forged entirely from carbon fiber and aluminum leaving lots of payload to support huge batteries.
Great review guys :-)
Is fpv real time, clear, and accurate with this?? Also will it stay that way at long distances? Thank you.
Looks very cool. But from an engineering standpoint, I have serious concerns about a lack of stiffness in a frame with two articulated single booms. There is no way that frame does not have a substantial amount of torsional flex or slop. You've got bearing clearances and CF tube couplers all working against you here.
It seems far better to keep the motor/prop plane as rigid as possible, and just articulate the landing gear.
Form follows function - not the other way around. I suspect that DJI has ignored that rule.
Can we put a different antenna because the ones on there are quite poor. Thank you!
Oculus Rift has an HDMI port yes? Does it mean I can plug an Oculus into the controler?
I just want one that I can fly around my city from home so I need one with the furthest range and longest battery do you guys have any suggestions for me
looks like a flying turret from portal :D love it!
Why is there a vibration in 0:47
-.-
Go get the *DJI Inspire 1 or DJI Phantom now with a huge discount from DJI with this link:* click.dji.com/M9gs8Vy_E35PEXcT?pm=link
This video is very great.
Shouldn´t the red and green lights be left/right rather than front/back?
Such a gorgeous quad and awesome feature set. Still, I personally don't want a pre-built carebear quadcopter, because I want to learn what makes them tick. So I got a David Windestål Tricopter V3 and a Red20RC H220 racing quad projects to build over the winter :)
be pretty epic watching 1 of them doing the DJI Fly Away
So, they've sorted out the fly away problem now?
The drones is ok, but there is something about the flight time, are they working on something that gives you a much longer flightime?