2005-2010 Honda Odyssey O2 Sensor replacement | B2S1 - P0154, P2247
Вставка
- Опубліковано 30 гру 2022
- 2007 Honda Odyssey
3.5L v6 with VCM1 Engine (J35A7)
O2 sensor replacement
Bank 2 sensor 1
OBD2 codes P0154, P2247
At the time of this job the online quoted price estimate was about $380. By DIY my price was about $85
This took me about 1 hours including filming, the filming which could be better I know. It was kind of tight quarters.
This was only the 3rd time I have replaced a O2 sensor.
O2 Sensor Location diagrams
Bank 1 : www.odyclub.com/attachments/b...
Bank 2: www.odyclub.com/attachments/b...
Top view showing engine compartment
www.odyclub.com/cdn-cgi/image...
Special thanks to @CarsNToys
• How To Test and Replac...
Tools used:
Ratchet
Flat head screwdriver
Needle nose Plyers
O2 sensor socket w84008 (compact o2 sensor socket special tool)
New O2 sensor NTK24346
NTK is the OE brand for Honda,
OEM / Interchange Numbers: 36531RGWA01, 36531RYEA01, 36541RGWA01, 36541RYEA01 , for reference.
ANCEL AD410 OBD2 scanner
www.amazon.com/ANCEL-AD410-En...
Sensor was from Amazon.com as they had the best price at the time, oddly enough when I went back few days later and checked it had jumped in price.
www.amazon.com/NTK-24346-Oxyg...
Performance tool compact 02 socket w84008
www.rockauto.com/en/tools/exh...
This video is NOT sponsored
DISCLAIMER :
Any information here is "AS IS" use at your own risk. The video producer or UA-cam platform cannot be held responsibly for anything that may be the result of anything attempted from what might of been learned from a video that is posted.
#oxygensensor
#honda
#odyssey - Авто та транспорт
Nice fix there , O2 sensor fixed the ploblem
Don’t know if you noticed . On b2s2 there was evidence of a oil leak.
I added at205 reseal with oil change . Seemed to help. But it’s also leaking from valve cover gasket . That one I will be getting done by my mechanic friend. I likely could do it but on this JSeries engine to replace valve cover gasket the whole intake and plentum comes off. Ordered gasket sets from Amazon the other day. .
It’s also due for a coolant drain and fill so that’s part of the procedure on this Engine todo as well.
Honda J35A7 engine
The gasket sets I am getting are FEL-PRO. About the best aftermarket ones u can get.
@@dfields9511 i got to do valve cover gasket on my truck I ordered fel-pro on them I got to do and i think on my truck I got a seal on the trans I might have to do , hopefully the oil leak doesn't affect the o2 sensor anytime soon
@@Turningwrenches85 should not effect sensor. It’s small leak at this point . I am burning and / or leaking about 1.3 qts of oil per oil change
And it has 230k miles on it.
I use 5w20 havoline synthetic blend high mileage that I get at Walmart in 6qt boxes .
Do you need to disconnect battery
I didn’t but that wouldn’t hurt to do that. Except you will need to know your radio and dvd code later.
Be careful changing O2 sensors in vans and then mistaking them for cars you may wind up putting the wrong party in
I always check to make sure correct parts are used.
@RajunCajun1 doesn’t all Hondas and Acura’s uses the same sensors?