Very informative video. Needing to reclock my secondary for 28 inch tires I installed. Going with c1 instead of b2. Could you please share how you were able to torgue to 80ft lbs. Special Spanner tool ?
Yeah how where you able to hold the clutch and get the 80 lb pounds? I acually just changed mine and at first had a slight clutch rattle. Gave it half throttle and had a loud screech noise and it wouldn’t move anymore.
if you look you will see a hole in the secondary that is threaded , all you do is run a 6mm bolt in that hole and it opens up the pulley and the belt comes right off, you dont take anything off except the belt cover.
What causes the belt to shread? Was it the weights or not? I have replaced my belts twice 2 different brands. One is an Ultimax belt and the other was a Lostar belt. They both got shread after riding less then 30 miles. Let me know what you think.
After I changed my belt, it has a slight rattle at idle. Only thing I can think of is the plate holding the bearing in the cover was a little bent inward...
How many miles do you have on it? I would be willing to give it a shot, but was very disappointed with the Gates belt, especially since the reviews online are good.
TDK Repair how did u torque to 80 lbs? I had trouble trying to hold the clutches from spinning. I only removed the main clutch not the secondary to put my belt on. I just tightened it with my dewalt torque gun and put loctite . 2017 800 trail.
You're a true professional very rare you see somebody on this UA-cam that I can learn from anybody to be happy to have you for a mechanic on a crew!
Thx 4 good vid,best 1 i found😊😊😊
Very informative video. Needing to reclock my secondary for 28 inch tires I installed. Going with c1 instead of b2. Could you please share how you were able to torgue to 80ft lbs. Special Spanner tool ?
Very good instrucions. How did you get a Torque wrench in there to tighten the nuts?
Yeah how where you able to hold the clutch and get the 80 lb pounds? I acually just changed mine and at first had a slight clutch rattle. Gave it half throttle and had a loud screech noise and it wouldn’t move anymore.
Do you have to take off the rear tire to do this or can you do it without removing it?
Hi there
Witch direction does the primary turn to take out the nut ?
THANK YOU.
Should the clutch only spin free one way???
if you look you will see a hole in the secondary that is threaded , all you do is run a 6mm bolt in that hole and it opens up the pulley and the belt comes right off, you dont take anything off except the belt cover.
I will have to try that when I replace the belt next time. Thanks for the advice.
You have to remove the big nut or it won’t open when you put the 6mm bolt in it to open it
How did you torque them ? How did hold clutch?
What causes the belt to shread? Was it the weights or not? I have replaced my belts twice 2 different brands. One is an Ultimax belt and the other was a Lostar belt. They both got shread after riding less then 30 miles. Let me know what you think.
Is this all the same for a 500 trail
After I changed my belt, it has a slight rattle at idle. Only thing I can think of is the plate holding the bearing in the cover was a little bent inward...
is there a link to buy the original CFMOTO Zforce 800EX CVT Belt?
That's how you do a instructional video
Is the aluminum belt housing cast into the block or is it a bolt on?
Bolts on
I got a ultimax belt instead of the stock CFMOTO belt and it’s a world of difference. And also half the price.
How many miles do you have on it? I would be willing to give it a shot, but was very disappointed with the Gates belt, especially since the reviews online are good.
TDK Repair I was told to stay away from gates, my local dealer sold me this one for $99. I had 1900 miles on my machine.
Thhank you, great video...
Would you have the part number?
@@TDKRepair hi do you know which gates belt? They have 3 compatible models: 40G, 40C and 40R.
Do you have the part number for the cfmoto belt and where did you buy it? Thx...
I purchased my belt on eBay, but any dealer can get it as well. The part number is 0800-055000-0001
where the one way bearing???
Where did you find the torque specs?
If you search you can find free downloads for the service manual
So what do u do on trails. That’s bad. Deal
TDK Repair how did u torque to 80 lbs? I had trouble trying to hold the clutches from spinning. I only removed the main clutch not the secondary to put my belt on. I just tightened it with my dewalt torque gun and put loctite . 2017 800 trail.
How did you even drive with that belt lol
LOL I didn't. Got stranded and had to get trailered home!
Wow certainly not an easy trail side repair.
No doing. That on the trail.