That was a great video. I love how you show the different ways and I love how you tell people about using an impact wrench. I feel the same way after doing it for so many years. Whether it's on other pieces of hardware or machinery, you just know how it feels!
I have watched all Todd’s videos and have learned so much! I have emailed Todd with questions and he responded very quickly and professionally. I will never buy another belt, nor will I ever ask questions of anyone else!! Hunter works has my business for life
I watched this video 3 or 4 times before deciding to buy the belt and do this myself. After watching the video, I bought the Hunterworks belt and clutch puller and it was as easy as described! I even used the dreaded impact method!! This video was the reason Hunterowrks got my business. Thanks again.
Great video, I pulled the secondary after struggling for an hour trying to use the clutch tool. Everything went great until the washer for the secondary blew up.. guess I miss judged my Matco impact haha
Been running gates belts on everything, but I will probably at least buy your primary puller. May even try out one of your belts one day. Great informative videos. Thank you!
Your videos are super helpful I have just recently bought a 2010 ranger 900 diesel keeps shredding belts so have bought a new secondary hoping that solves it 🤞🤞
I leave the secondary unbolted, and put the belt on with the secondary open to save from twisting the belt back on. Same way you took the belt off by unbolting the secondary works for putting it back on with ease.
Maybe for you but if done wrong, the belt sits low in the secondary, when you tighten it, it tightens against the belt, then when you drive it, the belt moves up and the secondary is loose. If done correctly it can be done and you seem to know that method, but not one we would show anyone, too much liability for us using that method
Thank you for posting these videos! Wonderful demonstration and explanation. Had to laugh at your "dumb ass" comment and attitude... spot on: only way to handle the ugly side of comment boards IS to chuckle. I just "inherited" my brother's RZR 900S since he owed me some money, and because he's upgrading to a 4-seater for his kids (says he's gonna miss the 900S). Anyway, I don't have a lot of mechanic experience but am excited to learn these basics. Appreciate your efforts to share your knowledge. I'll be picking up a Hunterworks belt. Next I need to learn how to change the oil... my husband will think he's died and gone to heaven.
Glad I found this vid. My buddy and me have an on going debate about using impact on the clutches. I use it and he tells me I'm crazy. Me for the win! Lol
Thank you for the video for it was easy to follow. I do have one strong suggestion though and that is maybe add a highlight to the video where you are reinstalling the six bolts on the clutch cover to make sure you line up the X on the cover to the X on the stationary sheaves. I did this thinking I would have to pull the primary clutch cover off again but by shear luck I lined up the X correctly. Just suggestion and other than great videos for Im getting educated fast on the services on my RZR.
Good video. Gonna have to keep this in mind for the future. Just had my cover off thusorning to blow outbany accumulated dust after a real dirty ride last weekend. (It was surprisingly clean). Frankly it looks like taking the dang cover off is more cunbersome than changing the belt. But yeah, cool.
Access..... If the wheel is off, you can get to those bottom bolts better I'm betting. But I was pleased anyway..... Incredibly dusty trail day, and VERY LITTLE dust in the belt area. Intake filter, another story!!!
I have a 2015 Polaris ranger 900 xp . Do a lot of slow rocky riding usually with two big guys in the machine checking cameras hunting etc at my hunting camp in Maine . Found your site on you tube and watching your videos I see your belts are slightly thicker then the stock belts . I got 2700 miles out of the stock belt but it’s been jumping a lot lately. Hopefully your belt stops that . Just ordered one and look forward to that jumping stopping .
I’m like another on here. Just stumbled onto your video, love the approach you take. Stupid question, 2019 XP1000 eps, should it have come out with a tool kit? Ours did not. Will double check with dealer. Will be getting on your site and ordering belt and primary removal tool. Thanks for being here for us dummy’s
When using the special tool on the secondary clutch is the shaft tapered allowing the belt tension to loosen or how does it work thank you great straight up video tks
How much do you charge to change the belt and go from square pucks to the round ones..also is it better to put a clutch kit in one and does it help the low end a lil better or not...
We don't offer the service to do it, just videos and the parts. Clutch kit depends, have a new video whether you need one or not. Look on our channel for it
Hey Todd, I had my shifter cable changed and my belt changed about a month ago at the dealership. Every since I got my 2014 Polaris Ranger 900 Crew back, If I hit brakes going forward or reverse, the majority of the times, the engine dies. It almost seems as if the clutch is not releasing the belt or something. Any ideas what could have happened? I took it back to the dealer today, but I just need an insight before they call me telling me I need more parts or service. Let me know. Thanks.
When do you know it's time to change the belt ? When I go forward it's like jumping at first but onces I get it moving it dose fine also it dose it while going reverse
Hello, I’ve been struggling to pull off my primary for a couple hours now. It got submerged and think that it’s rusted shut. My puller is good but not sure if impact is strong enough. Any suggestions? Already tried the hammer and don’t want to do the grease bomb trick.
I have a question I have a sportsman 400 I went 1in bigger with tires and now it seems take a little bit to get going and I changed the belt when I did tires is there anything I could do to tighten up the belt
Hi Todd, could you install the new belt by removing the secondary like you showed us and just putting the new belt around the primary 1st and then around the secondary and push the secondary into place and securing the bolt? Kinda like you did with the primary last on the video. Thanks
That's pretty much how I do it. You just have to have the secondary in your hands, put the belt around the secondary, then slip it over your primary, and then put your secondary back onto the machine. Super easy, and no belt twisting.
Ideally yes, they are not very expensive for piece of mind. Plus you WILL use them ALL the time once you get used to them. Run them on w/ impact then finish w/ torque. EZ!
bought your belt, white washer and round Puck for my rzr 1000 s, instructions say how to break it in, my question is should I use low? high? or little of both
Why can't I get my new belt on my polaris 900xp? The circular hub on the right just won't let me get the belt completely over it. It seems like it's too small of a belt but the shop that sold it to me said it is the exact belt needed for all these. Any help would be much appreciated thanks!
Having trouble with my 2016 xp 4 1000 it is out of time and me and my cousin have been working on it for past 2 months we have seen and looked at videos what is the procedure to have it align right on the crank and the lobes were off and we adjusted them and did the manually turn and torqued ever bolt to specifications anyone know what's the issue? And what markings r we suppose to b looking for to make it TDC in the crank still no start last night please help..Thanks
Is that the same as a 2019 polaris rzr 900 pulley Because I burly bought one and went to drive it and it doesn't move back or forward it used to Before I put in the water
Is it OK to drive about 10-15 miles with a few of the strings on it, I blew a belt with very minimum tools when at home I'll pull secondary pulley off and clean it up? Good video. I just subscribed now.🇺🇸🇺🇸
Hey what's going on I have a 2006 Polaris ranger 500 and I keep blowing belts up and destroying them I blew out my clutch with air to clean it do you think it can be the spring in the clutch or the clutch weights when I'm heading the gas on the Polaris sometimes it's having trouble on engaging the belt I was looking at so sometimes it was sticking a little bit and I'm afraid to step on the gas thinking I'm going to blow a belt
@@Hunterworks yeah the person I bought the Polaris ranger from he used to drive it with no clutch cover case I was thinking the clutch might be done for because all the dirt and grime probably went in between the weights and everythingit didn't seem like it had too much power when I was driving it at mudfest this past if I change that clutch completely springs weights complete clutch it should give me more power right
Would you please tell me what size socket is needed for the drive clutch bolt? Even the dealer does not have that info. You said the secondary clutch uses a 15 mm socket. Thanks. Can a person put the belt over the secondary, then install it and tighten the bolt down? You did not address that in your video. Thanks - Bill - NW Oregon
@@Hunterworks Thank you for the fast reply. I really appreciated this video. I'm old and try to pack emergency tools in my cargo box - including an impact gun for flat tires on my trailer or Rzr. In this video you show removing and re-installing the secondary, but not with the belt in it, Is that possible? If you have a video on this, please send me the link or the title so I can search for it. If you have no video on this, I guess I'll learn when I finally have to replace a belt. Bill -
@@HunterworksI have a primary puller ordered. The same my dealer sells and I have the two sockets and a factory clutch pry bar already in my Rzr. I'm too old and weak to risk getting stranded in the middle of no where. Thank you again for your video and taking the time to give me feed back. Bill -
Might be best for you to watch our alignment tool video that will explain it. The short of it, 6 bolts holds engine and tranny together, they loosen or break etc
yes and no, use the secondary tool or belt too like in this one but it s a different style of tool, it can be seen in this video ua-cam.com/video/3yRfgWxcFCY/v-deo.html
"Know when to quit" Good advice for many things in life
Thank you for getting to the point and showing plus and minuses of different techniques 😉
I just found this channel. I love the style and format. No nonsense, just lots of experience and common sense.
Cause he’s from Mississippi. They still know up from down. California not so much! 😂
Love your tips. These are GREAT videos.
That was a great video. I love how you show the different ways and I love how you tell people about using an impact wrench. I feel the same way after doing it for so many years. Whether it's on other pieces of hardware or machinery, you just know how it feels!
yeah it does seem you just get a feel for it over time
Haha I'm always learning and appreciate your candor.
I have watched all Todd’s videos and have learned so much! I have emailed Todd with questions and he responded very quickly and professionally. I will never buy another belt, nor will I ever ask questions of anyone else!! Hunter works has my business for life
I really appreciate this comment and your business
Wow mechanics are amazing, you guys make it look so easy thank you so much
Thank You
I watched this video 3 or 4 times before deciding to buy the belt and do this myself. After watching the video, I bought the Hunterworks belt and clutch puller and it was as easy as described! I even used the dreaded impact method!! This video was the reason Hunterowrks got my business. Thanks again.
Wonderful video ,just purchased a new RZR will be ordering your products
Thanks for the info just bought my first rzr 1000
Awesome video, By the book is not always the best way. My next belt will be a hunterworks
Just installed your HW belt and white washer. No more jerky starts. love it.
Sweet
I love that Todd does all this the "old fashioned" way. Like a farmer or mechanic. Hunterworks has been great for me.
I appreciate your comments. No professionalism here
Very informative video. Thank you!
Good stuff man. Thanks!!
This guy does great! Makes it look simple!😮 Thanks!
Appreciated!! Todd
Thanks for the how to videos. A huge help for a newby like me
Welcome
Awesome video! I love learning the hacks of how to do a job in different ways!
Thank you
Thank you for the Great info.
GREAT VIDEO. LIKED THE Way you took your time and showed all the methods to remove the belt.thank you
Thank you for your comments, we try!!
Great video, I pulled the secondary after struggling for an hour trying to use the clutch tool. Everything went great until the washer for the secondary blew up.. guess I miss judged my Matco impact haha
Your all right just what I was looking for OLD SCHOOL!!!! and honest!!!
Thank u
Love your style and content Subscribed !
Thanks for the video, it helped me out.
Good video. Straight forward information.
Been running gates belts on everything, but I will probably at least buy your primary puller. May even try out one of your belts one day. Great informative videos. Thank you!
Awesome video. Thank you for sharing!
Thanks Todd!! Got my belt from you and now going to install it.
Good deal and thank you!!
Ha I love this video, neat to see the other ways of swapping a belt. This guy was funny
Awesome video! Thank You!
thank you very much for your time on showing me how to change out the belt
You are welcome
Great video! Let's see some more please!
Thank you. Great Video.
Thank you this helped a lot
You helped a lot with this video thank you
i like knowing how the primary and secondary are installed. thanks for a excellant video
Enjoy your how-to-videos! To the point, and no BS… as it should be. I’ll be buying more parts from you as needed.
Thank you
Very nice exploration and information
Thank you
Really appreciate this video.
You’re welcome
The hunter belt fixed 90% of my problems ,2015 900s EPS
For the other 10% , gas on it and go!!
Thanks great video
Love this ole boy
Your videos are super helpful
I have just recently bought a 2010 ranger 900 diesel keeps shredding belts so have bought a new secondary hoping that solves it 🤞🤞
Great video. Thanks
Thank you
Good info. Thanks
Great video
Awesome video, thanks.
You’re welcome
I leave the secondary unbolted, and put the belt on with the secondary open to save from twisting the belt back on. Same way you took the belt off by unbolting the secondary works for putting it back on with ease.
Maybe for you but if done wrong, the belt sits low in the secondary, when you tighten it, it tightens against the belt, then when you drive it, the belt moves up and the secondary is loose. If done correctly it can be done and you seem to know that method, but not one we would show anyone, too much liability for us using that method
Thank you so much. I have a 2014 Polaris ranger XP 900 and it's about due for a new belt.
We got plenty
@@Hunterworks
Will have to be next, I have bigger problems up first. Broken rear CV axle
Thank you for posting these videos! Wonderful demonstration and explanation. Had to laugh at your "dumb ass" comment and attitude... spot on: only way to handle the ugly side of comment boards IS to chuckle. I just "inherited" my brother's RZR 900S since he owed me some money, and because he's upgrading to a 4-seater for his kids (says he's gonna miss the 900S). Anyway, I don't have a lot of mechanic experience but am excited to learn these basics. Appreciate your efforts to share your knowledge. I'll be picking up a Hunterworks belt. Next I need to learn how to change the oil... my husband will think he's died and gone to heaven.
great video thank you
Thanks
Glad I found this vid. My buddy and me have an on going debate about using impact on the clutches. I use it and he tells me I'm crazy. Me for the win! Lol
Winner Winner Chicken Dinner!!!
Thank you
I like the video very helpful 😊
Thanks
Thanks
I like this guy
Thank you
Thank you for the video for it was easy to follow. I do have one strong suggestion though and that is maybe add a highlight to the video where you are reinstalling the six bolts on the clutch cover to make sure you line up the X on the cover to the X on the stationary sheaves. I did this thinking I would have to pull the primary clutch cover off again but by shear luck I lined up the X correctly. Just suggestion and other than great videos for Im getting educated fast on the services on my RZR.
Where in this video did I take the cover off?
Good video. Gonna have to keep this in mind for the future. Just had my cover off thusorning to blow outbany accumulated dust after a real dirty ride last weekend. (It was surprisingly clean). Frankly it looks like taking the dang cover off is more cunbersome than changing the belt. But yeah, cool.
That cover is tough at time
Access..... If the wheel is off, you can get to those bottom bolts better I'm betting. But I was pleased anyway..... Incredibly dusty trail day, and VERY LITTLE dust in the belt area. Intake filter, another story!!!
Very informative video just bought a razor want to be able to do my own maintenance so far is basic and simple with a touch of Southern attitude LOL
Certainly got that attitude down. If a non turbo, better look at our secondary rollers if you do nothing else
I have a 2015 Polaris ranger 900 xp . Do a lot of slow rocky riding usually with two big guys in the machine checking cameras hunting etc at my hunting camp in Maine . Found your site on you tube and watching your videos I see your belts are slightly thicker then the stock belts . I got 2700 miles out of the stock belt but it’s been jumping a lot lately. Hopefully your belt stops that . Just ordered one and look forward to that jumping stopping .
Thanks, it might help for a bit, sounds like bottom of the clutch just worn some, less grip as it ages
@@Hunterworks my next belt change will probably be with one of those low speed clutch kits . 👍
You're not a dumbass You're helpful I never had one of these things before You showed me how to get the belt off of no problem thanks
Needed a refresher, doing a belt inspection and this hunter works belt with 1200 miles on it doesn’t even look like it’s been used!
Thanks.
Like your video helpful
Thanks
Thank you thank you! Question regarding the primary and secondary do they require any kind of lubricant after you clean up the parts?
As a general rule no, I have a cleaning video somewhere on a primary shows you where to put some dry lube spray
I been using method 3 all the time on artic cat primary clutch split in half without a puller anyway and never twist a belt
I’m like another on here. Just stumbled onto your video, love the approach you take. Stupid question, 2019 XP1000 eps, should it have come out with a tool kit? Ours did not. Will double check with dealer. Will be getting on your site and ordering belt and primary removal tool. Thanks for being here for us dummy’s
Yes, it should
Thank you sir, will bounce my prep guy at dealer
Thank you man!! I appreciate that should not have bought a Belt removal tool
When using the special tool on the secondary clutch is the shaft tapered allowing the belt tension to loosen or how does it work thank you great straight up video tks
You are pushing the back half of the clutch back against spring pressure
Is this same technique for a 18 ranger xp900ho? Thanks
nice
How much do you charge to change the belt and go from square pucks to the round ones..also is it better to put a clutch kit in one and does it help the low end a lil better or not...
We don't offer the service to do it, just videos and the parts. Clutch kit depends, have a new video whether you need one or not. Look on our channel for it
For a guy less experienced a torque stick with that impact would be great. Just for peace of mind.
I would not disagree, I just do not own any and my finger control is pretty good
Hey Todd, I had my shifter cable changed and my belt changed about a month ago at the dealership. Every since I got my 2014 Polaris Ranger 900 Crew back, If I hit brakes going forward or reverse, the majority of the times, the engine dies. It almost seems as if the clutch is not releasing the belt or something. Any ideas what could have happened? I took it back to the dealer today, but I just need an insight before they call me telling me I need more parts or service. Let me know. Thanks.
Sylvester Washington www.hunterworks.com/grinding_into_gear_creeping
When do you know it's time to change the belt ? When I go forward it's like jumping at first but onces I get it moving it dose fine also it dose it while going reverse
Yea when they get to jerking like that replace the belt.
I had a belt come apart on mine and slung a piece up into the vent pipe blocking it off I didn't notice it burnt the new belt up in no time
It happens.
What will make a new belt be loose
Hello, I’ve been struggling to pull off my primary for a couple hours now. It got submerged and think that it’s rusted shut. My puller is good but not sure if impact is strong enough. Any suggestions? Already tried the hammer and don’t want to do the grease bomb trick.
If the hammer deal does not work, you have nothing to lose trying any other method before cutting it off.
I have a question I have a sportsman 400 I went 1in bigger with tires and now it seems take a little bit to get going and I changed the belt when I did tires is there anything I could do to tighten up the belt
Please email me at
Forgetsalot1274@gmail.com
Yes I have a 2014 Polaris rzr s800 I can put it in gear but it wont move r go what could be my issue
Check linkage adjustment, mine keep coming loose then a couple drops of blue lock tight and no more issues!
What are your thoughts on driving your RZR without the belt cover?
too much but a good bit coolers, I don't run without a cover
Hi Todd, could you install the new belt by removing the secondary like you showed us and just putting the new belt around the primary 1st and then around the secondary and push the secondary into place and securing the bolt? Kinda like you did with the primary last on the video. Thanks
William Easley no sir. That won’t work.
Just trying to think outside the box. Thanks Todd.
@@Hunterworks why not?
@@matthewfbrand7285 Belt is not long enough to put around both unless both in place
That's pretty much how I do it. You just have to have the secondary in your hands, put the belt around the secondary, then slip it over your primary, and then put your secondary back onto the machine. Super easy, and no belt twisting.
If I am replacing the primary and secondary clutch do in need a torque wrench to hit the foot pounds???
Ideally yes, they are not very expensive for piece of mind. Plus you WILL use them ALL the time once you get used to them. Run them on w/ impact then finish w/ torque. EZ!
@@dwarden3 I got one and got it done. Thank you.
bought your belt, white washer and round Puck for my rzr 1000 s, instructions say how to break it in, my question is should I use low? high? or little of both
High
@@Hunterworks ty, and ty for getting right back to me
Why can't I get my new belt on my polaris 900xp? The circular hub on the right just won't let me get the belt completely over it. It seems like it's too small of a belt but the shop that sold it to me said it is the exact belt needed for all these. Any help would be much appreciated thanks!
I would need to know the part number and brand to make sure and are you using a belt tool? Also, ranger or RZR?
Having trouble with my 2016 xp 4 1000 it is out of time and me and my cousin have been working on it for past 2 months we have seen and looked at videos what is the procedure to have it align right on the crank and the lobes were off and we adjusted them and did the manually turn and torqued ever bolt to specifications anyone know what's the issue? And what markings r we suppose to b looking for to make it TDC in the crank still no start last night please help..Thanks
Sorry, if not in the clutch I would not know this one.
Is that the same as a 2019 polaris rzr 900 pulley Because I burly bought one and went to drive it and it doesn't move back or forward it used to Before I put in the water
I don't understand what you are saying or asking here, sorry.
Your supposed to break in your belt before you go full throttle or submarine it
bonne video
When you do that don’t you have to check for alignment to make sure your belt is straight once you pull the primary
No sir, alignment is not an issue taking a primary on and off
I cannot find the ranger 150 (youth) belt on your site. Polaris pn on belt is 3050270.
Because we do not sell it, sorry.
Can someone tell how much 95 footpounds is in Nm or how I can convert it? Greetings from North Norway!
130, google a converter
Is it OK to drive about 10-15 miles with a few of the strings on it, I blew a belt with very minimum tools when at home I'll pull secondary pulley off and clean it up? Good video. I just subscribed now.🇺🇸🇺🇸
Few strings on what
@@Hunterworks on the secondary or the back pulley
@@randy-yo8zi if you ease back maybe. If you have no choice guess you have no choice
Hey what's going on I have a 2006 Polaris ranger 500 and I keep blowing belts up and destroying them I blew out my clutch with air to clean it do you think it can be the spring in the clutch or the clutch weights when I'm heading the gas on the Polaris sometimes it's having trouble on engaging the belt I was looking at so sometimes it was sticking a little bit and I'm afraid to step on the gas thinking I'm going to blow a belt
mud life Junkie PR I’ve never looked at a 500 clutch but in this situation always best to put your eyes on all parts of both clutches
@@Hunterworks yeah the person I bought the Polaris ranger from he used to drive it with no clutch cover case I was thinking the clutch might be done for because all the dirt and grime probably went in between the weights and everythingit didn't seem like it had too much power when I was driving it at mudfest this past if I change that clutch completely springs weights complete clutch it should give me more power right
Are the bolts regular thread or reverse threa?
Wen Sara regular
When I'm spraying off my my rzr 570, why is so much water getting inside the clutch housing?
I don't know that one, going in the intake or exhaust for the clutch would be my guess
I’ll check those spots, thanks.
Hey i got polaris 1000 xp rze i Presses the gas-inadence not traveling what could be the problme
Something in clutch or transmission, start by taking clutch cover off and see what you see then use our troubleshooting videos
Would you please tell me what size socket is needed for the drive clutch bolt? Even the dealer does not have that info. You said the secondary clutch uses a 15 mm socket. Thanks. Can a person put the belt over the secondary, then install it and tighten the bolt down? You did not address that in your video. Thanks - Bill - NW Oregon
It's 21mm but you lost on second part. We have videos for removing and reinstalling secondary
@@Hunterworks Thank you for the fast reply. I really appreciated this video. I'm old and try to pack emergency tools in my cargo box - including an impact gun for flat tires on my trailer or Rzr. In this video you show removing and re-installing the secondary, but not with the belt in it, Is that possible? If you have a video on this, please send me the link or the title so I can search for it. If you have no video on this, I guess I'll learn when I finally have to replace a belt. Bill -
@@billmay8116 you can't do that. Takes too long to type just trust me install clutch then belt.
@@HunterworksI have a primary puller ordered. The same my dealer sells and I have the two sockets and a factory clutch pry bar already in my Rzr. I'm too old and weak to risk getting stranded in the middle of no where. Thank you again for your video and taking the time to give me feed back. Bill -
How and why do these transmissions get out of alignment??
Might be best for you to watch our alignment tool video that will explain it. The short of it, 6 bolts holds engine and tranny together, they loosen or break etc
Can the same method be fine with a2016 turbo?
yes and no, use the secondary tool or belt too like in this one but it s a different style of tool, it can be seen in this video ua-cam.com/video/3yRfgWxcFCY/v-deo.html
I reckon the ranger 1000 would be the same process?
No, it would be the same as this video. ua-cam.com/video/WoW51w2ERfY/v-deo.html