BMW 328i E90 How to replace Washer Fluid Filler Neck N52/N52K E91 E92 E93 2006 - 2013

Поділитися
Вставка
  • Опубліковано 25 кві 2023
  • In this video I will replace the washer fluid filler neck on a 328i E90 with the N52 SULEV engine. This will be the same procedure for the E91, E92 and E93. Even if its has the N52K engine.
    Parts:
    61-66-7-135-409 BMW OEM washer filler neck
    61 66 7467951 BMW OEM washer fluid cap cover
    Non -OEM washer cap amzn.to/3V2cmsA
    Tools:
    1/4" ratchet flexhead: amzn.to/3VQGdDA
    1/4” extension set: amzn.to/3Y95WJt
    10mm socket 1/4": amzn.to/3VCmise
    8mm socket 1/4": amzn.to/3PcsWmB
    Craftsman Pick set: amzn.to/3W0etwl
    8mm socket 1/4": amzn.to/3PcsWmB
    Pocket Screw Driver : amzn.to/3HkKHym
    - This is a combo kit comes with a small Philips screwdriver. We will only need the flathead but this is the best value for the price
    Flat head screw driver: amzn.to/3iJpp32
    Disclaimer
    ---The Friendly Mechanic assumes no liability for property damage or injury incurred as a result of any of the information/Reliance contained in this video. The content of this video is available for informational and educational purposes only. Always seek professional advice from your mechanic who has thoroughly inspected your vehicle and can make suggestions or judgements. Every vehicle is different, no two vehicles are the same and every repair will be different. The Friendly mechanic does not guarantee results or give warranties implied or expressed. The use of PPE (personal protective equipment) is always recommended whenever working on/with cars, vehicles, tools, parts and Chemicals of any kind. I always recommend safe and proper work practices when operating/handling power tools, hand tools, parts, liquids, chemicals, automotive lifting devices, stands, electrical equipment and or any portrayed in this video and shall not be used by untrained persons. Any injury, damage, loss of any kind that may result from improper use is the sole responsibility of the user and not myself/The Friendly Mechanic. Any and all information you use in this video shall be used at your own risk.
  • Авто та транспорт

КОМЕНТАРІ • 20

  • @pablomorales1434
    @pablomorales1434 9 місяців тому +3

    Got an E90 back in February and couldn't find a single video about this repair. I can't express enough how thankful I am! Great video!

  • @brianw338
    @brianw338 3 місяці тому +2

    Aww man. Thank you for this. I’m pretty good at figuring things out and this just confirms how I need to proceed with this project. Thank you again.

  • @Jackmerius_Tacktheritrix5733
    @Jackmerius_Tacktheritrix5733 4 місяці тому +1

    Only BMW can make such a simple thing so complicated.

  • @leopadh
    @leopadh 8 місяців тому +1

    Got a cracked hose too, thanks for the great how to

  • @lafannwilliams1945
    @lafannwilliams1945 7 місяців тому +1

    Awesome video! You just saved me hundreds of dollars. Thank you..

  • @Getsitdone
    @Getsitdone Рік тому +2

    Great video!

  • @honorablewiz7447
    @honorablewiz7447 Рік тому +2

    you should reroute the filler neck to inside the cabin. so when ever you have to pee real bad you can go inside the tube

  • @hectorespinoza7641
    @hectorespinoza7641 8 днів тому

    Where are the tower jack mounting points

    • @friendlymechanic9778
      @friendlymechanic9778  8 днів тому

      If you look under the car you will see black rectangle blocks. You can place the jack stand there.

  • @georan4323
    @georan4323 7 місяців тому

    I saw the splash guard on the floor under the car after you removed the tire. Does that have to be off as well to replace the washer fluid hose?

    • @friendlymechanic9778
      @friendlymechanic9778  7 місяців тому

      No it doesn’t need to be removed. I had it off because I was also replacing the coolant reservoir. I needed it off to drain the coolant.

    • @georan4323
      @georan4323 7 місяців тому

      @@friendlymechanic9778 thanks for the quick reply. I really appreciate it. I also saw your video on the coolant reservoir. Keep up the good work. Can’t wait to see more videos on the Beamer.

    • @friendlymechanic9778
      @friendlymechanic9778  7 місяців тому

      Thank you I have a valve cover gasket replacement video coming out in a few weeks. Just need to finish editing.

  • @manspidey1507
    @manspidey1507 Рік тому

    2023 m340i lci airfilter replacement plz T.T

    • @friendlymechanic9778
      @friendlymechanic9778  Рік тому +1

      That may be difficult to get my hands on one as the service on that year wouldn’t be due for some time.
      If you send me a private message on Instagram I would be more than happy to send you pictures and step by step guides on how to replace it.