Footing Design and Reinforcement Details - Column Design and Reinforcement Details
Вставка
- Опубліковано 7 лют 2025
- My Whats'App No : 00923463785623
My 2nd Channel in Hindi/Urdu
www.youtube.co....
Follow me on :
Facebook :
/ thestanikzai
Instagram :
/ thestanikzai
Any scholarship in construction am ready I like the way u do, u are not selfish,I have learnt something from u, salaam alaykum
This is very good Engineer on earth may God provide more life for him.
I like it 👍
This should be a basic concept. We all have to get instruction from a qualified structural engineer for the Architectural drawing. The strength of the concrete will depend on the country to country. Standard norms are ok. It may be changed in practical conditions. Quality of mixing water, Quality of the different types of steel rods with different manufacturers, Soil conditions wind force, and weather conditions. Appreciate the presentation
I learnt important things in construction of buildings..Surely it helps non civil engineering people ,great insight and while constructing their own houses
Thank you Sami usthaz.
Your tutorials are very helpful
Usually when asked people will hide such information and not share.
Pls usthaz, can i get any Mail ID ?
Is there any book or pdf available related to on site knowledge ?
I mean from setting layout, excavation, foundation, shuttering and information related to structure.
I am a on site supervisor.
Pls help sir
Very important information about Column nd it's footings.
Useful content i'll be following you all mi life...
This is excellent! I live in The Bahamas and I find this very helpful. Thank you for posting.
Thank you so much for such great information. God bless you and your family!!!!!
Am really appreciate your content Sir May God gives yu a more life
💯💯 from Tanzania 🇹🇿
You guys are highly knowledgeable
Am well convinced and interested in ur teachings and they are true,
Loving these basic videos, even as a Civil engineer !!
These are good notes for preliminary design, safety and economics will determine actual final results
you engineering problem solver. god bless you sir
Thanks so much u are doing a great job
Very good teaching . It is better to write your notes little bigger than you write at present , in small letters .So that we can see in mobile ...
Sir your content is very good and you are very consistent..Thank you professor from the philippines
Thank you for your usual succinct teachings, those this measurement for 2-3 story building also apply for 1 story building rcc footings
Hi brother so happy of your videos very much helpful. referring the videos form chennai. thanks
God bless you
Sir very clear explanation you done I'm not engr but I got an idea to you tnx very much sir God bless from Danny Tala of Philippines
Good informetion for genaral peopls
Very informative
Thanks very much for lectures. I live in Sierra Leone west Africa.
Great lesson, please could you add a practical lessons
Thanks
🙏Thank You fir the valuable information , searching for🙏
Thanks a lot for very informatif lecture.
thank you so much. you are so helpful. keep up the great work and thank you for thinking of non civil engineers as well.
Thank you so much.
No. of bars = No. of ads in this video
Thanks for the help
Great job love your explanations
I advise all of you to get professional civil engineers on your projects, so many factors come into play in footing design, there are NO standard footing details everything depends on that particular project, it can end up being catastrophic In the long run if you design footings yourself without engineering knowledge.
Very very good sir...
good information
Thank you for your help! Having these walkthoughs for several scenarios is great. These are stand alone columns.
Any guidance on building with footings and also rebar bends?
Hi sir this is great stuff ,I'm just a blick layer but with your teaching I feel already like an engineer thanks
Very INFORMATIVE
Civil engineers now have software to plan which size of footing and the size & number of steel bars to use.
I have a renovation now in my two story house, I used 1x1 size of footing and depth for additional colons using 6 16mm and 2 12mm steel bars for colon, my structural engineer said that’s still too weak that the house might collapse because they base on the civil engineering software computations.
Its true explanation thank you
Audio is perfect
Vv nice vdu
All the structures following indian standard codes or British codes ?
Thank you for your explanation
In my brick house instead of putting concrete columns I put steel posts inside the brick house. Can it still act as a concrete column?
Great Work Sir
Did you say that the depth of footing for 1 or 2 storey building is 1.2 - 1
5m ?
Sir, is it possible you make a chart or a table for all the requirements for beams and columns, their size, spacing, steel dia, number of steel bars, size of footing, type of footing, depth of footing, sbc, conc grade etc.. for domestic and commercial buildings from G+1 up to G+10? It will be very helpful and we will appreciate.
For footing 45mm clear cover is low i think it is better to make it75mm. because the footing is underground and always under soil pressure & moisture content
Moderate 50mm . Severe extreme conditions morethan 50mm
Not soil pressure , it's based on environmental conditions mild moderate severe extreme
Excellent 👌
Thanks for the tutorial. So, which standards do you use? Eurocode or ?
Thank you. My footing is 30cm depth and width for my brick house. I live on a rock mountain top. Am I able to so another storey of brick for a 2nd floor? Please assist thank you.
👍👍👌👌
Good and well understandable
Thanks for the advise it much usefull.
My understanding is that the flood area should have a much depth foundation, in addition the foundation should be covered with a heavy duty construction plastic to reduce humid. I used this method for my guest house.
Your explanation specialy on footing design just like a good mason but not an enginerr.
How do you calculate structural loads to a building, what formula is used to calculate structural loads of bldg?
thank you sir, it is very informative
The information should come with give also the formula so that civil enginering could clear undertand. 🙏
Thanks. This is very informative. I'm planning to renovate my house and make it 2 storey with mezzanine floor in between for bed rooms.the top would be a roofdeck. I will use steel as columns and beam. The columns would be on top of the rcc footings/1ft above-ground column. Thanks.
What is this rcc
Sir the depth of footing your talking about is the thickness of footing?thanks
No its depth of excavated soil
@@Nabam_Punna Ok sir thanks. How about sir the thickness of column footing, what is the allowable thickness for Two storey house or bldg.?Thank you
Great work sir.
You explain everything very clearly. Much thanks.
Good Info. Thanks
I'm from Bangladesh
thanks fir the info
Thank you sir for the info.
Keep it up
Could you plz tell us about sloped footings?
Dear brother,
Depth of of footing is too high. I think it should be in feet not in meter
For depth of food is too much you say,I thinks there is same errors.
yes
Thank you so very very much
Hi again. Thank you for all your work. Question, 1. i'm designing a 3 to 6 floor building for a Shore Front Resort. I can i present this method to my local Civil Engineer? 2. Can you demonstrate the method used for an inner Beam Pillar Structure? Thank you again
der kha rora der kha
Mr. Sami, is your explanation for engineers or for layman,l am getting doubt.
For non-engineers
Thanks sami
I start to build my house in the philippines i want to elevate from the road elevation may be 60cm my question is i need to put beam or not if need to put beam what is the hight of the beam from the footing thank you
thanks
My question to you is what if we use spot welding for rebar instead of trying?
Can we use 9" X 12" column with dia 12mm rods-8no.s for G+1 residential building?
Sure...4ft×4ft base
Is this applicable to commercial office buildings please??
Hallo , what does 2 story mean, do you count bottom and upper floor ? Or is it bottom 2nd upper floor and 3rd upper floor ?
It includes ground floor and 1st floor
Thank you Sir, may I ask what's the best solution if my land always flooding?
the footings or foundation will be different in flooded area, you will be using pile foundation system.
@@SaddamHusain-qo8cl ok thanks Sir.
helo sir can u make a video for this kind of topic but for single storey house only thanks sir
Sir this depth include blinding concrete or not?
sir you said in a video that there should be 4 bars in a square column and 6 bars in circular column, but here you used 8 bars, what's the reason?
Mini 4 bars.. U shouldn't use below 4. The more no of bars depends on the size of column, the area of rfmt req.. Etc
@@chrysjac5195 Ok. Thank you.
i have a question, is mesh footing necessary for all columns
İf i had overlap in the middle is there the same thing to tie!!!??just i need closly at the bottom and top?? Thank u
If your 3 story building is 20×40 do you still need 12×12 Colums ?
Dear sir
you did not calculate steel bar of column for 2 to 3 st and how many steel or which kind of steel need. isn't if important?
He said 1/ 2 in steel, with 8 lengths. Widths I believe were 2 ft x 2 ft. You could double check
Sir is it okay to use 9"X12" column for two storey house
sir do videos on desine column & beams also
O
If I want to use 6 inches block for a storey building, can I use column and plinth beam of 6inches width by 9inches depth
Great
What is the length of the bend of bar upside in the single mesh ? Like you mentioned @10:35
12x12 inch column cannot conceal in wall so what to do
Dear sir make video about beam and slab design also. Thank you so much
Explain beams and slabs
Super
If i use 16 mm iron four nos for 12 by 12 column for 3 story building is it ok.footing is 4' by 4' defth is 4'
My house is g+2.
Thank you