If you see this video helpful, Please "SUBSCRIBE", like, share for further helpful videos. Các bạn nhớ "ĐĂNG KÝ" kênh, like, chia sẽ để nhận được nhiều video hữu ích khác nhé.
What a very useful video sir👌👌😍😍plz make 3d model of bridge construction of all parts bar position like pile pilecap, pier, pier cap, girder, abutment etc plz👏👏👌👌
Just want to ask. this video shows a non monolithic procedure of concrete pouring right? Is it really alright to pour it this way? Based on my knowledge, slab ang beam should be poured in monolithic. please enlighten ... thank you
My Qts is on crank bars are provided for Negative reinforcement at 200 Distance? there should also be a Extra top Bar in between cranck bars for Negative reinforcement!!!
Hi, I have a question if you willing to teach me. Should I bend the end of each sides of all main bars so the bend would resist pull out action of the rebar? Or the bends are only useful if concrete mixture is poured together for slab and beams where their rebars are tie together? In this video slab is not integrated with the beam, and thus their rebars is not tie together, I just asking if there when they are tie together.
@@halalmeatshophk yes i've seen it also, the method used is just the standard method which is the "banig" type and not a 1 way or 2 way slab,just saying😁
Sir I'm planning to build a large hall of 25 feet x 18 feet slab area. I gave 9inchx12inch 8 columns around the slab. There is no column at the centre of the hall. Will a headen beam work at the center? Or a regular beam mandatory? If hidden beam ok then what will be the size of the beam and the rod size? Thanks in advance.
A good question sir. In this plan, your hall is large so that You need main beam at the center in two way. The size of beam : 23,6inch x 11,8 inch. You can reduce column . 6 column is enough.
Paanomo mai aaply iyan kung 3 layer lang ang bakal mo,kung sa residecial maisasagawa,eh! Halos lat ng nakita ko at ginawanamin e walang nakabennd,puede kung pang kumercial pangiaaplayan ganyang pag lalatag ng bakal,salamat.
Two-way slab is the best if you don't know that slab is applied oneway or twoway slab. Onemore, twoway slab accept to apply for two cases. But oneway slab can not accept for twoway slab. Consider your budget if you don't know which one apply for oneway which one apply for twoway. Really dangerous
If you see this video helpful, Please "SUBSCRIBE", like, share for further helpful videos.
Các bạn nhớ "ĐĂNG KÝ" kênh, like, chia sẽ để nhận được nhiều video hữu ích khác nhé.
Paano is the only one I have ever had in my spare years and was not able to make it
@@christianlalatavlog you
what is the thickness of the slab?
watching ad to support your work. helped a lot to understand my father's renovation plans. much thanks
Really thanks
Thanks for providing this wonderful animated video, it is really helpful for students also these kind of animations takes time I can understand.
You are correct. I really appreciated your comment. Thanks
Nhà dân dụng chả thấy ai làm được như thế này, làm thế này thì tốt quá đi
Nhà dân dụng tải trọng sử dụng bé quá nên làm sơ xài không bị gì.
Very good information
thanks
Thanks! This was really helpful.
Hope you like it. Thank you very much and have a nice day
@@NHAXANHVIETNAM Yes. You too.
Super video brooo keep going 👌🏻👌🏻🥰🥰
Thank you very much
Thank you sir
This video is very important for understand of arrangements of steel in two way slab
Thank you very much sir. Have a nice day
Beautiful work.
Thank you very much
Very nice information ❤
Thanks sir
Nice presentation. Keep it up. Please make more videos like this.
Thank you very much. Have a nice day sir
Thanks for two way slab Building construction technical knowledge. to keep in mind .
Thank you very much
Great channel 👍
thank you sir
Nice sir. thank you so much for making this content. Done always support your channel sir..
Thank you so much
Very impormative. Those is what I want...thanks. new subscriber here..
Really appreciated your comments
Thanks For Teaching sir
thanks sir
Thanku sir very helpful .
Thank you very much sir
Thanks for this it helps a lot
Great work sir..
Thank you very much sir !
Best explanation
thanks
Thank you
What a very useful video sir👌👌😍😍plz make 3d model of bridge construction of all parts bar position like pile pilecap, pier, pier cap, girder, abutment etc plz👏👏👌👌
Yes sir. Thanks for suggestion
Very good 👍👍 nice 👍👍
Thank you very much sir
ua-cam.com/video/hyBvxdDuCd0/v-deo.html
Nice one
Very good nice video
Thank you sir. Have a nice day
Design G+2 floor residential building column and beams.if u can do . Thanks
Wow thanks for showing this.,
Thanks you so much sir
very good video, thanks!
Thanks sir
Nice Video ♥️
Thank you so much Civil engineering guide
ua-cam.com/video/5yNmlBEJnNI/v-deo.html
Just want to ask. this video shows a non monolithic procedure of concrete pouring right?
Is it really alright to pour it this way?
Based on my knowledge, slab ang beam should be poured in monolithic.
please enlighten ... thank you
My Qts is on crank bars are provided for Negative reinforcement at 200 Distance?
there should also be a Extra top Bar in between cranck bars for Negative reinforcement!!!
Hi, I have a question if you willing to teach me.
Should I bend the end of each sides of all main bars so the bend would resist pull out action of the rebar?
Or the bends are only useful if concrete mixture is poured together for slab and beams where their rebars are tie together?
In this video slab is not integrated with the beam, and thus their rebars is not tie together, I just asking if there when they are tie together.
I understand your concern about bend bar. All bar bend the end is the best. But consider actual outsite for worker can do
you are right, the slab should integrate into the beams. this video can only be viewed for entertainment, not for practical use in construction.
@@NHAXANHVIETNAM The actual photo of slab at 9:50 is totally made different compare to your animation. so why would you use this photo?
@@halalmeatshophk yes i've seen it also, the method used is just the standard method which is the "banig" type and not a 1 way or 2 way slab,just saying😁
It must be bend at beam. Must do hook at beam
Спасибо большое.очень поучительно.
Огромное спасибо
Why top extra bars are not provided?
Thank for short course
Thanks sir. Have a nice day
Good
thanks
You mean, the cranked bar is the Main Up Layer?
yes sir
Thanks a bunch.
Yes sir
How to make this kind of video ..i need it for my project
how to make animation video search karo
😊
Hi NHA XANH VIETNAM what is the spacing of cranked bar?
In this video. the space is 20cm
Great..
Superb
Thank you so much .
Lest say a slab is 3.5 by 6.77 meters... Will it be a one or two way slab?
which slab is better for 2 story building - one way slab or two way slab ?
Twoway slab will be better . Dear sir
@@NHAXANHVIETNAM - Thank you Sir
The spacing between main bar and cranked bar is 100?
You are right
Sir in two way slab in each direction they provide 2 layers of distribution bars?
Yes sir. Both layers will have distribution bars in each direction.
Which slab better on wall 8*4 meter one way slab or two way slab?
Its one-way slab is ok but two-way slab is better than
@@NHAXANHVIETNAM Thank you for your response!
It woul be nice to name tha reinforcement like bottom1,2 or top1,2 also where is monololithic? Anyway thanks
Nice
Thanks you sir
ua-cam.com/video/5yNmlBEJnNI/v-deo.html
Sir I'm planning to build a large hall of 25 feet x 18 feet slab area. I gave 9inchx12inch 8 columns around the slab. There is no column at the centre of the hall. Will a headen beam work at the center? Or a regular beam mandatory?
If hidden beam ok then what will be the size of the beam and the rod size? Thanks in advance.
A good question sir. In this plan, your hall is large so that You need main beam at the center in two way. The size of beam : 23,6inch x 11,8 inch. You can reduce column . 6 column is enough.
@@NHAXANHVIETNAM thanks
@@NHAXANHVIETNAM plz explain to me what is a200 in this video?
@@NHAXANHVIETNAM and D10?
It mean 200mm space of distance
Great!
Thanks sir
ua-cam.com/video/hyBvxdDuCd0/v-deo.html
Thanks man
Thank you so much. See you next video
Sir but we are not providing this much reinforcements in practical cases . Why?
Great Video
For 3.5×3.5M two way slap,please suggest size for main bar and distribution bar ..
This small size span. Main bar D10 distance 120mm-150mm is enough. Distribution bar D8 fully enough
@@NHAXANHVIETNAM 👍👍
bro very nice explanation .can u tell me which software you used to show this in imaginary form
Send to my email your question
@@NHAXANHVIETNAM what is your email how i can get your email address
@@practicalcivilengineer6846 boss what is the software pls
Sa tingin ko SketchUp ang ginamit niya.
How many steel is provided, that cross each other
It have dimension or space every bar sir
Salamat,...
Paanomo mai aaply iyan kung 3 layer lang ang bakal mo,kung sa residecial maisasagawa,eh! Halos lat ng nakita ko at ginawanamin e walang nakabennd,puede kung pang kumercial pangiaaplayan ganyang pag lalatag ng bakal,salamat.
Can u put those bent up bars with that series? Do it in practical and tell me
Yes sir
Where is the development length of the slab
Sir please suggest main bar and distribution bar dia for 2 way slab 9m x 10m
Structural Design Only.
bit.ly/2UK0nog
Its too big space between 2 two columns. sir. Please reduce space
Nice educational videos.can I suggest me structural engineer pdf
Thank sir. You are welcome
@@NHAXANHVIETNAM sorry, can u suggest me structural engineer ebook or link.
@@NHAXANHVIETNAM limit state method book.
@@NHAXANHVIETNAM I am a civil engineer knows all concept but only weak n structural calculations.ur videos are nice. Keep it up.god bless u
Sir this is just my knowledge in my school only. It have no ebook sir
Thank you so much.......
Thanks sir. Have a nice day
Crank bars will be alternative in each ends
Yes sir
Hi sir
I have hall of 17.5 and 17 feet. With 4 nos column with 9 inch wall. Can I plan 2 way slab and canceled beam.
Can suggest please
Thank you
Sure! Totally You can do it without beam.
@@NHAXANHVIETNAM thank you
2 way slab has all 4 side bentup????
Great but it's over reinforcement
Thanks so much. This is for your safety house.
ua-cam.com/video/MTThTuM7zZg/v-deo.html
Ek sariye me dono taraf ban kese ye galat hai na
Is it possible for 4inch thick concrete slab?
It is so reasonable and possible with 4 inch thick of slab.
Why is the slab on the beam not inside the beam?
Sir thanks for d video ..kindly share about the plan of 3 m,x6m. floor ..2storeys..thanks
Yes good ideal sir
ua-cam.com/video/5yNmlBEJnNI/v-deo.html
thanks sir, sir which software your using for the video
Thanks. Its 3d architecture software
Structural Design Only.
You can also collect the Excel sheets from my channel for slab design free of cost.
bit.ly/2UK0nog
What will be the spacing if I'll use d12 as main bar and d10 as distribution bar with the same 4x4 slab size?
D12 as main bar. I think reasonable space is 20cm the best
You have to design the spacing using 12mm vice cersa.
Salustiano Suay thanks for your opinion
where are the extra tops
Where is the extra bars L /4
Good day Sir.. Please help me... Is it possible to use 12mm diameter bar with spacing of 15cm for 3 storey house having a 4" thick slab?
Thank you for your question . Its over reinforcement . You can use 10mm diameter bar with space of 15cm. 2 layer that so enough bar
Brother there is no provision of distribution steel in two way slab .
Kindly check
Main steel is provided in both directions
Youre right on main steel is provided in both directions. But distribution bars are needed to shape main bar on their right position in both sides
I think we have to provide crank bars in alternate position.
Crank bars already had in this video sir.
cut bars, distribution bars and bent bars, i cant see bent bars and cut bars in your last photo, only 2 layers of distribution bars.
This structure didn't have cut bars. Its have bent bars and distribution bars .
Which software u will use this animated video sir
Tengo Losa 7.25 m x 4 m ; puedo usar D12@200 principal y D10@250 distribucion en los dos sentidos. la losa es de cisterna transitable para vehiculos .
Very nice video
#studywitharniteen
Thank you very much. And have a nice day
ua-cam.com/video/MTThTuM7zZg/v-deo.html
software??
How do I calculate reinforcement for Room Size 3.6m ×4.2m ?
Which software do you use to make 3d models and also which software did you used for animation ?
Its sketchup software. You can install and use it
Any specific plugins you used for these animation on SketchUp?
Civil Er yes many plugins.
Can you help me ? Can you please list the plugins if possible? Would be great help.
See here dear
If we want to extend slab at one side about 4 ft in two way slab then what to do to make slab stong
Easy sir. Please see this video:
Cách bố trí thép sàn conson và sàn một phương | Green House Construction
I can't understand your language please reply in English
Sorry sir. Please see newest video of my channel . You will have the best answer.
What is the length of bent up bars?
Thank for your comment. Its about 10~15cm length of bending bar.
See here dear
Background music is very disturbing
👌👌👌👌👌
Thank sir
does D10 mean 10mm steel and a200 mean 200mm spacing???
You are correct.
@@NHAXANHVIETNAM thanks...one more question does the bent bar calculated as L/4 (for the bent of the bars also)
One more time, you are correct. 1/4L of shorter span bars is the best. And easy regulation to remember.
@@NHAXANHVIETNAM thank you :)
with that design how thick would the slab be??
Base on how long longer span and shorter span will chose how thick slab be. In average, slab thick 10cm is the best.
angele of bendind, or length of bending bars?
thanks for your comment. angle of bending about 60 degree and the length of bending bar about 10-12cm
Watch here
Why not Alternative bentup bars?
Bent up bar already sir
I am talking about alternate bending
it depends how you want to do .u can give alternative bent up or you can but starlight bar and next is bent up on both side.
ua-cam.com/video/5yNmlBEJnNI/v-deo.html
watch this video u will get idea.
कोनसा सॅलप घर बनाने के लिये आच्छा है one way or tow way , which slap are best for home pls told me
Two-way slab is the best if you don't know that slab is applied oneway or twoway slab. Onemore, twoway slab accept to apply for two cases. But oneway slab can not accept for twoway slab. Consider your budget if you don't know which one apply for oneway which one apply for twoway. Really dangerous
Watch video solutions of engineering questions here
Thank sir
ua-cam.com/video/MTThTuM7zZg/v-deo.html
Over reinforce
Enough is better
@@NHAXANHVIETNAM that is more than enough..adequate is the best.
Yes sir, I appreciated your opinions.
ua-cam.com/video/hyBvxdDuCd0/v-deo.html
Muito bom. Diga-me e se fosse um espaço de 5mx5m?
Yes sir
What is the thickness of slab?
Its 10cm of slab thick sir..
Thanks
Extra top baar nehin diaa
Wrong procedure.... crank should be upto l/4 section in both directions....
Thanks for your opinion
That kind of method not using today
15" X 13" two way slab please.. Main bars and distribution bars size.. + Distance.
Main bar is 10mm and distribution bar is 8mm. Distance 15cm. Two layer
@@NHAXANHVIETNAM sir how about 7mx8m
@@josephanne4363 it a big slab. Two layer paralel required. Main bar d10 . Distance 15cm
ua-cam.com/video/5yNmlBEJnNI/v-deo.html