How To Install A Backup Camera 2008-2013 Cadillac CTS

Поділитися
Вставка
  • Опубліковано 7 вер 2021
  • Atoto Backup Camera: amzn.to/2YLKgJg
    Other Cadillac CTS Stuff
    Atoto S8 Standard Radio: amzn.to/3ykQMCF
    Axxess ASCW-1 Steering Wheel Control Interface: amzn.to/3gy0Ge8
    Metra Cadillac CTS 2008-2013 Antenna Converter: amzn.to/3BcTqMK
    Metra Cadillac CTS 2008-2013 Dash Kit: www.bestbuy.com/site/metra-da...
    ACDelco Gold 48AGM Battery: amzn.to/2Wp5zPo
  • Навчання та стиль

КОМЕНТАРІ • 18

  • @m-c-m-
    @m-c-m- 11 місяців тому +1

    God Bless you for showing how to removed the trunk latch cover

  • @angeloramirez9001
    @angeloramirez9001 2 роки тому +6

    Real niggga super good video super detailed helped me out hellllla

  • @oneilwhite4458
    @oneilwhite4458 3 місяці тому

    Niiice … I have a 2017 XTS … I’m doing this same thing in a week or 2

  • @amberthreadgill8930
    @amberthreadgill8930 Рік тому

    Which rear backup camera did you use for your car? And will this work for a 2009 Cadillac CTS?

  • @urbanpopfitters9829
    @urbanpopfitters9829 2 роки тому +2

    🔥🔥🔥

  • @ggarcia432
    @ggarcia432 2 місяці тому

    if you did not connect to reverse wire how is it showing when you put it in reverse?

  • @Savagelife4realz
    @Savagelife4realz 4 місяці тому

    My camera keeps saying no signal

  • @cesar6932
    @cesar6932 Рік тому +1

    How did you get power to the camera? You showed the battery and harness but didn't show which wire you spliced.

    • @LionTechX
      @LionTechX  Рік тому +1

      Watch the video carefully again around starting 7:45 seconds, it goes into the wiring. The positive isn’t spliced in the back how you think. It runs through the RCA. Then you just ground the camera in the back. This eliminates having to run multiple wires.

    • @cesar6932
      @cesar6932 Рік тому

      @@LionTechX Thanks, my camera isn't set up that way, so I see why I thought I missed it.

    • @jeffh2125
      @jeffh2125 Місяць тому

      @@LionTechX Interesting; I really thought you had to connect to the rear tail light wire to get power when it went into reverse. But it seems you've connected to switched aux power from the head unit and the display knows when to come on due to the wiring harness. This will save me the headache of splicing into the rear tail light reverse wire and also will allow me to use the reverse camera even when I'm not in reverse. Thanks a bunch for this video !

  • @luisamaya983
    @luisamaya983 2 роки тому +1

    What radio is that

    • @LionTechX
      @LionTechX  2 роки тому

      Atoto S8 Standard Radio: amzn.to/3ykQMCF

  • @ulucio86
    @ulucio86 3 місяці тому

    You doing to much all you really need is to replace the backup camera which is literally plug and play. Took about 15 minutes.