This is the best how-to on the brake controller install I've been able to find, thanks! I'd like to see the Encapsulated Power Diode installation in a video but got great help from the tech people at Redarc to get it done. Working perfectly in my 04 4runner.
Thanks for watching! If you've got any questions about the Encapsulated Power Diode, please don't hesitate to reach out to our Tech Support Team on 1300REDARC (1300 733 272).
My vehicle already has a 7 pin but no trailer brake so I've been shopping around and ran into yours. You say to remove the already installed blue cable if it has one, where does that go into the vehicle if it doesnt have a trailer brake already? Does it just terminate somewhere? Oh boy, does that vehicle have enough accessories attached to that battery?
Thanks for watching! The Tow-Pro connects to the battery via the black wire and a fuse or circuit breaker. We recommend checking out the wiring diagram on page 11 of the instruction manual.
The output Blue wire should connect to the trailer socket (7-Way or 12-Way) Trailer Brake output pin. The only wire that might connect to the pedal actuator would be the Red wire from the TowPro. But typically this is only if the vehicle is older and doesn't have any CANBUS related systems, otherwise interference can happen in that method. We hope that helps!
Thanks for watching! The Tow-Pro Wiring Kit does not come with any of the Tow-Pro wiring harnesses, instead it comes with the TPWKIT-013 or TPWKIT-014 depending on the kit.
This is the best how-to on the brake controller install I've been able to find, thanks! I'd like to see the Encapsulated Power Diode installation in a video but got great help from the tech people at Redarc to get it done. Working perfectly in my 04 4runner.
Thanks for watching! If you've got any questions about the Encapsulated Power Diode, please don't hesitate to reach out to our Tech Support Team on 1300REDARC (1300 733 272).
Great video. Appreciate the time y'all spent putting this together.
My vehicle already has a 7 pin but no trailer brake so I've been shopping around and ran into yours. You say to remove the already installed blue cable if it has one, where does that go into the vehicle if it doesnt have a trailer brake already? Does it just terminate somewhere?
Oh boy, does that vehicle have enough accessories attached to that battery?
What wiring kit you used on this video?
do you have instructions for l200 2012 wiring?
Hello, We do not carry many vehicle specific installations guides. The TowPro will commonly install quite similar to this video for most vehicles.
Hi, Did i miss how you connect tow pro to the battery. cheers wayne
Thanks for watching! The Tow-Pro connects to the battery via the black wire and a fuse or circuit breaker. We recommend checking out the wiring diagram on page 11 of the instruction manual.
So you don't need to connect the blue wire to the brake pedal brake actuator?
The output Blue wire should connect to the trailer socket (7-Way or 12-Way) Trailer Brake output pin. The only wire that might connect to the pedal actuator would be the Red wire from the TowPro. But typically this is only if the vehicle is older and doesn't have any CANBUS related systems, otherwise interference can happen in that method.
We hope that helps!
Wonder if i have to buy the tph-015 harness separately or it come w the pro elite kit?
Thanks for watching! The Tow-Pro Wiring Kit does not come with any of the Tow-Pro wiring harnesses, instead it comes with the TPWKIT-013 or TPWKIT-014 depending on the kit.
would be nice if American vehicles came with switch planks.