How to deep clean your Dyson!
Вставка
- Опубліковано 4 вер 2024
- www.youtube.co...
Dyson Ball Multi Floor 2 tear down - • Taking apart and assem...
→ As an Amazon Associate I earn from qualifying purchases.
⭐Dyson Upright Vacuum Cleaner, Ball Multi Floor 2 - amzn.to/2PFegil
⭐Dyson V6 Car + Boat Handheld Vacuum - Cordless - amzn.to/2uI4nsU
Gears used in this video
www.amazon.com...
#dyson, #vacuum, #cordless
Hey everyone just posted a video on tearing down Multi Floor 2, enjoy! ua-cam.com/video/2G5HiLY5SDg/v-deo.html
I’ve had a multi floor origin for five years. Never cleaned the poor thing! Always wanted to but never knew where everything was at. Thanks to your video I can now fix things the way they’re supposed to be. I’ve looked all over the Internet and this is the only video I found that shows the original multi floor origin being torn down and where the filters are located in such. Thank you! Now I will finally have my back and back to its original operating state.
I want to thank you so much for this video. Our vacuum suddenly stopped sucking anything up. We decided to use your video to take things apart and investigate and realized that our vacuum had never been cleaned despite weekly use for 5 years. To say it was matted and disgusting is an understatement. Thank you so much for this video. The vacuum runs perfectly now!
Thank you for watching! We do have another more detailed cleaning, ua-cam.com/video/2G5HiLY5SDg/v-deo.html, just be very careful when you are taking everything apart 😃
Ugg😅
Thank you so much for the info! I just decided to see if I could find something showing how to clean my Dyson multi ball 2 and your video popped up. You explained it all perfectly!
This was my weekend project! I took apart all parts you demonstrated and then some! I cleaned every inch of dust and grime. To think I was going to take it to a service tech!! UA-cam has everything! Thanks for this.
Glad I could help!
What a legend, I vacuumed chunks of foam from a foam football my dog chewed up, my vacuum overheated and wouldn’t start, through the time it had to cool down and taking apart the vacuum I cleaned the years of hair off that brush and cleaned the filter and it works good as new. Thank you👍
Thank you! Haven't cleaned mine in like 5 years! This was very detailed and helpful
Glad it helped! If you want an even deeper cleaning, check out this video, ua-cam.com/video/2G5HiLY5SDg/v-deo.html!
Thank You SO MUCH, I just fixed my own Dyson! Saved me lots of $ and I dont have to worry about a repair shop trying to take advantage of me! 💥
This is the best video on these Dyson's. Hands down! Thank you!!
Great job man. This is exactly what makes the internet excellent. So thorough.
I love this take on the internet. You really can learn anything at any time! I’m so grateful for the internet and people providing useful information on it.
Thank you so helpful!!! My husband of 1 yr had one for 7 yrs and never cleaned it until I asked if he ever had. So I looked up this video and boom so clean!!!
Thank you so much for making this!! I'm probably going to clean mine now! 😊👍
Glad I could help!
The video was sooooo helpful. thank you so much for recording it. we followed it step by step and everthing turned out well and the vaccum is as new now. :). Thank you.
This was great. I was able to find the blockage. Thank you for
posting this.
Thanks for your help! Not only is my Dyson clean now, it has more power!
Glad I could help!
Thank you for this great tutorial. I was in despair thinking my vacuum was kaput, only to realize it had a clog in between the roller and the upright hose, which was easy to clear once I knew how to get it apart.
Saved me from a major crisis! 🙏
I don’t use wipes. I use the kitchen nozzle with water to get rid of all the dust in the two parts of dust bin.
THIS WAS THE VIDEO THAT HELPED ME SOLVE AN HOURS LONG PROBLEM.. I LOVE YOU
Best Dyson video I’ve seen about cleaning . Very detailed . Thank you
Thank you so much for this!!! It’s 2021 and you’re video is so clutch rn!!!
Very helpful. Thank u for taking the time to make this.
Glad it was helpful!
Oh my goodness! Ours completely shut down. We had no idea one had to go through all this to clean it. Boy what a mess after 3 years. It was pretty gross as you can imagine. Yuck! However thanks to you it's up and running again! Yay! Great video we appreciate it very much.
great video. just cleaned my dyson multi floor. didn't even know there were two filters.
Thank you!! I didn’t know about the red clips behind the brissels. That’s what I needed to clean the roller. I’ve tried and tried. Thanks again!!
BRILLIANT!!! Your instructions helped me to thoroughly clean my Dyson Total Clean!
Thank you! Ours is a used vacuum from family. Idk if it was ever taken apart and cleaned out or how long they had it prior to us. My filters are drying and I have to get the hair off the rollers, then just reassemble it all and see how much better it’s gonna work. It wasn’t sucking ANYTHING up at all just spitting it back out.
Thank you so much for this video. Did not know how to remove canisters. So frustrated. You were so helpful. Xx Grandma Rosie
Glad it helped
Thx for this. We have the first model u showed n I’ve cleaned it thoroughly, even went a bit further n wiped out the inside of the clear main body n also the bottom wipers. My Mrs is now very happy 😃 with me n I’m not gonna tell her I learned it of UA-cam just so I look clever. Thx mate 😀
😁Glad it helped
@@NewParentsInTraining thx. I’m now in the good books as the vacuum was TOTALLY blocked up with the filters. Now it’s as good as new. Cheers from across the pond in England 🏴
Thanks so much for taking the time to share your cleaning technique
Thank you sir.That helps.I never dared to clean before. Tried manual instructions and it extremely difficult to follow.Now I will do it.Tx again.
Thank you. The only video that actually shows you all the buttons and how to open everything!
You’re an excellent teacher.
Thank you so much !! I accidentally sucked up a cat toy but managed to get it out thanks to you
This is definitely the best for cleaning the dyson.
Great video! Everything I wanted to clean. So helpful! Thank you!
You are so welcome!
Great video! I thought I was going to have to replace a defective vacuum. Turns out, it was just clogged from not being cleaned. Thank you!!
Amazing video! Really helpful and detailed. My dyson is running smoother than ever!
Thank You, Thank You, Thank You for this informative video!!! You have helped me understand and remedy the issue with my DYSON BALL!!!
Very appreciative of you and your time to make this video!
Glad it helped!😀
Thanks I haven’t cleaned mine in 2 years
Thanks so much!! I didn’t know about the side filter or that the bottom undoes. Just cleaned my whole hoover
I would use compressed air for some of the cleaning.
Mannnnnnnnnnny Thanks!!!!! Your video was 1000% helpful!
So appreciative for the tutorial! Thanks...😁
Awesome direction. Thanks
Thank you you're letting me know that I do not have to remove the other side of the ball. In order to get to all the hoses.
Anytime! 😊
I don't know why my comment got deleted years ago. It wasn't a bad comment at all. Anyways. Thank you very much for the tutorial. If you don't clean it with detail you get this "Dry Clean Steam press machine sound" while the vacuum is on. After 2 or 3 attempts ignoring that sound. I literally thought my Dyson was broken. But I got really lucky that the vacuum was able to turn on again after the detail cleaning. It's seriously way too much work for maintenance but you gotta do it.
thankyou "so much" for teaching me about my Dyson! Very good job !
Fill slop sink add some dawn and using warm water soak it. Oils in the dust cling to the top insides. I spent 15 minutes getting the water to run clean. Then it needs to dry before you put it back together
VERY thorough! Great video!
Glad you enjoyed it!
Thank you, this helped me a lot!
Per the instructions on the unit, water is supposed to flow from outside, not through the filter opening.
Thank you for this video! Very helpful
I enjoyed it. Very good step by step instructions. Very helpful.
You're very welcome!
Thanks!
Where is my reply
Thank you for sharing my Dyson is now clean🙂
You’re welcome 😊
Thank you thank you!!!!!!!! SO HELPFUL!!!! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
You're welcome 😊
Super helpful breakdown! Thank you!
Saved a big headache thank you
Excellent instructions! Thank you!
Great video! Well done!
Glad you liked it!
thank you! saved me throwing my vacuum off a cliff!
Thank you, there was something wrong with mine and you helped me fix the problem.
Glad to hear it~!
Thank you so much for posting this! This is really helpful and clear.
I have the multi-floor model with the yellow top like your first one. I decided to do a couple more things while I had it apart. The inner part that you take out from inside the clear canister (see ~ 6:40) turned out to have a ton of dust up inside it. I tried using a cloth over a chopstick to wipe out the sides, but then I realized I could just tap the whole thing on the floor and get most of that dust out.
The other thing I did was that I ended up rinsing the clear canister under running water, while it was separated from the machine. That way I could get the inside of the trap door (that you open to let the dirt out) clean - it was caked with dust. I'll be sure that dries for a whole day because it has rubber gaskets that could harbor some water.
I'm interested in how you clean the Dyson v6 absolute floor sweeper beater. It's a dusting bar and it gets really nasty. This was helpful, thank you.
PRICELESS VIDEO. Thank you.
Glad you enjoyed it!
Nice and detailed, thank you so much 😊
My pleasure 😊
Thank you. Extremely helpful. Is there one on why the recline mechanism on DC 40 type gets stuck?
I take mine apart and tap it on the ground to remove the heavy dust I also hit it with the air compressor.
German Design makes easy maintenance
Thanks so much for this video I have two of the same models. Very helpful.
Turn over back of vacuum there's a Grey button on the back of the vacuum to remove the pipe for clogs
Thanks. Great video.
To keep the carpet cleaning head from destroying itself, you must remove the purple rollers (vac #1) from the base head to assure there is nothing around the motor housing. Quickest way to burn out your carpet head
Your dirty vacuum looks super clean compare to mine 😆😅😅 thank you for the video
Anytime 😊
hi great video thank you. i tried to clean water with it. hope it doesn't ruin . im trying to clean it as I watch
Completely dry it before turn on again, hopefully nothing is ruined 😊
New Parents in Training omg I just used it for a minute and then saw your video. The parts are drying in the sun now. If it works I will keep you posted. Thanks again for your detailed video!!
Hopefully everything would be okay~! Fingers crossed! 🤞
Wow very much obliged take care buddy🙏😇❤️
I need to take the entire roller brush out and wipe down underneath where grime gets. This is the part I can't figure out.
🎉Thank you so so much . 🎉
Excellent video, thank you
Thank you!! this was extremely helpful! And I realized how disgusting I am because I've had a Dyson for a half a year and had not once properly cleaned it 🤮 yeah gonna clean it much more often now
Very helpful. Thank you!
Grey tab releases the canister from top so you can wipe it out
I followed this and my old UP13 machine looked great. After four or five uses it seems to be holding on to the dirt everywhere. The rubber seals, the cyclone area. Is there something that I can use on it to make it squeaky clear or a product that might repel dust from sticking to the cyclone screen?
Good job👍
Thanks!
Nice vacuum
Air compresser works well as cleaning clogth
What’s the best way to clean and disinfect all the attachments? Are they safe to use soap/detergent/ water on?
I would say depends on which attachments are you talking about. I would say for the most attachments they should be okay to wash with water, they are basically hard plastic parts, especially the different tubings that came with the vacuum. I would be careful with the attachments that have brushes, you either wash them really well or just wipe them with disinfectants. Say if you used soapy water and the brushes are not thoroughly cleaned, then the next time you use it on any surfaces you might create soapiness where you don't want any. *be sure to let all the parts dry before usage, leave them dry at least overnight*
New Parents in Training thank you. Spoke with dyson customer support and they said the same thing as well. Wiping the brushes with a Lysol wipe and letting them dry should work but not to submerge in soapy water. Thanks again.
Excellent👍
good job
Thank you for this video 😭😭😭
looks like you forgot the filter on the top of the small one. That can really screw you up. That little blue piece pulls straight out and then you can clean it.
how do you adjust the head to clean from flat floors to carpet
Thanks need this video
How yo put apart and clean the vacuum but not the filters 🤔
So so helpful!!
Glad it was helpful!
Is there a way to deep clean the hose?
Superb video
Help! I can't open the top of mine.
Mine was made before this one and it's purple instead of orange.
And it doesn't have a little purple button/ tab on the front of the top like this one.
I don't see how I can open it and pop the top filter out. I want to show a picture but I don't see how to upload it
Great video but not 100% deep clean. You should have included how to dismantle the cyclone portion of the dustbin which builds up dust mega big time due to static charge during usage. I bought the special screw drivers required to take it apart and like to clean it once a year.
That's 1of 2 faults I feel the Dyson has... they should have designed the cyclone section to be taken apart easier. And trying to use the hose without the vacuum either falling over or chasing after you a real pain in the neck.
It's why I plan on picking up a Riccar Tandem Air Premium Pet upright bagged vacuum. Has duel motors, no cyclone to fiddle with and have to clean all the time and the hose can easily be used out to 15 feet without it tipping or chasing you.
There is little buttons on machine to open machine for clogs
How do you clean the black debris inside the screening on the Ball Multi-floor II?