CUMMINS SWAP | DIESEL | BUMPSIDE F-250 FUMMINS BUILD
Вставка
- Опубліковано 5 вер 2024
- I love this Ford F-250 Cummins swapped (Fummins) build we just completed. This thing started out as a 2wd forestry truck. We kept the original saquoa brown paint and trim but changed the entire driveline! We went with a 12v Cummins, compound borg Warner turbos, Superduty axles and so much more. This channel is about building what everyone dreams of building and just having fun. Watch for a sneak peak of our next build at the end of this video.
Sick build man! Love it, just need to work on that tune.
Thanks man. Means a lot.
I'd take this over a new truck anyday
I’m glad you stayed with the factory brown! Looks amazing!
too good of a built guys... bravo
Love the 72 I'm just particularly fond of the 78-79 Ford f250s or F class period, and would love to get my hands on a crew cab so I can modify it they're just hard to find especially in Maryland.
I would LOVE to get a picture of this truck next to my 2002 F-350 with a 24v in it someday. This is a beautiful build, keep it up mate!
So Glad you made a channel man! I would love to see an in depth video on the suspension/axle swap that you guys did on this.
Hey thanks I hope you like the channel have another video uploading tonight. Not the axle swap however. But I will try and get a more in depth video of the brown truck and everything g suspension related. 👍
@@rakordus Sweet man! I've been wanting to 12v swap a dent side for years and am finally nearing a point in life where I might be able to start soon. Got my eyes on a mint 2wd extended cab that would definitely need a second driveshaft. May be picking your brain a bit when that time comes!
Living On Wheels sure no problem. Bumps and dents are by far my favorite. So pretty familiar what works and don’t. Just let me know what questions you have and I’ll try and answer.
@@rakordus My favorite body styles without a doubt.
And sounds good man. Much appreciated!
Beautiful truck. Always wanted one of these and in that colour too. Living in Ireland we don’t have these here but ever since I drove my friends 1980 Silverado in the Turkish mountains as a kid I always wanted to get a big old yank pickup equip it with air compressors, winch etc and build me a log house up there using the truck itself. Hillbilly life goals. Would love to see more of this build. Good luck with the channel 👍
Oh look another Cummins swap!! How original.
And i like how the interiors original some ppl just body swap stuff
Bad Ass Awesome 👌
Awesome build! I want to do the same with my dad's 1954 F-100.
Truck is GORGEOUS!
Looks great, I like the whole idea. You should talk to Bank's about the unburned and wasted fuel that doesn't give you any power and makes mini charcoal briquettes. He will show you how to clean up the fuel and make more power.
Awesome truck!
Man don't need to do anything else to it. That truck is the best truck I've ever seen, it's my favorite and I don't even like trucks. But I do that one.
Beautiful truck, nicely done.
Just stumbled across this video looking for projects similar to mine. Congrats, awesome build, I love it. Built, not bought! Hope you keep it for a long time! I've been working on a 1958 Dodge body swap with a 12v. You build faster than me!
He thanks you need any help just ask if I can I will
This kind of build is on my mind
Bro I am from Australia 🇦🇺 I like your channel, I’ve got a SR Country ( 67 -72 Bumpside Bronco Made in Brazil 🇧🇷) with a factory MWM 229 diesel and 5 speed Clark manual transmission and Dana dif !
All the best from South Australia 🇦🇺
Nice job guys.
I bought one in high-school. Been planning this same build for 15 yrs.
Glad to see some real content
This thing is beautiful
I had a 1969 Ford 4 door shooter bed... this was 30 years ago and hasn't seen another like it.
Awesome Truck.
Wow just wow!!!
I have a 1979 F250 South African built extended cab that I've been hoping to drop a 6BT into. This is one cool truck!
Thanks man I appreciate that good luck on your build!
Gorgeous truck
Beast! Beautiful rig
I look forward to seeing some content 👍🏿
groceries?😫
🤣🤣👏nice build
Awesome bro!!..👍🏽…Aloha 🤙🏽
All the manfactures should be able to offer each others engines
You took the WI fummins plate. 😂 I wanted that.
Lol sry bout that.
@@rakordus lol
Holy shit that’s clean
Getting ready to purchase back my first truck 1970 f250 4x4 and going to be putting a 12 valve 6 speed manual in it, would love to see the swap in detailed videos!
Subscribed
Daniel Dillon awesome man hope you like the channel
Saw this in burlington WI things bad ass
Thanks man ya I live in b town lol
@@rakordus lol I live one town over
Love it!!!
Solomon with Ford era, has one that sort of looks similar to that one, with the Cummins diesel in it. it's a little older than that one, if I remember rightly I believe it's a 1970 crew cab four door. it's called Gold dust he's having some problems with a oil leak with it. I would bet he would appreciate any tips and advice you could give him. he features a lot of trucks on his channel on a segment called what the truck. and I'm sure he would love to feature your truck on his channel, and with his channel he knows a lot people who would be interested in your services. I'm guessing you already know of him? but if not you should check his channel out. I immediately thought of him when I seen your truck.
Been looking for one myself. I would buy it.
Subscribed. This is an awesome truck. I'm in Wisconsin as well and love seeing that old truck without rust. Did you sell this truck or keeping it as a driver?
Kept it
You know you can take the instrument panel out of an F700 and run round gauges in these?
Awesome, channel, y'all should build them and give them away, I love to have that copper truck
Ya I thought about it for a minute. Man I love that truck it would be hard to part with it.
@@rakordus I completely understand, I'd like to find one and build it
Nice build, really cool truck. How much power did it make and what trans?
I have a mint 67 F250 2WD Camper Special and want to do a 12v swap. Is there any company that sells the mounts and such?? Thx so much. And awesome ride!!!!
I'm from Wisconsin too. I know it's hard to believe but I think I passed this truck up about 4 years ago. If it isn't the same truck it was a twin. Now I have a 72 crew I'm building. I would love to ask a few questions. I'm using a 04 isb out of a freightliner with 2400 allison. Engine placement and intercooler are a few things I'm trying to figure out. Thanks
will a dana 44 hold a 6bt. concerned about weight on the front axle.
Man I got a 1993 Ford inline 6 but I was thinking can you make it like this . Diesel and all the color the interior the wheels
Do u do work like tht for customers if they wanted and had all the money for it ?
Is the intercooler “about” were the radiator originally sat? I just got around to looking at intercooler spacing on my in progress 1967 Ford Cummins swap and their isn’t much room at the bottom of the grill and the radiator support. I also need to put an a/c condenser in there somewhere...Fun times!
Gringos más pilas..a ver creadores de estás...Bestias hermosas... atte Victor.....
ALL F250 4x4 Four door trucks came factory with a short bed for some stupid reason
Is this truck for sale or your personal rig?
Sub'd, Great work!
Hey thanks. Enjoy man
I follow you on TikTok lmao
I have a 76 ford and a cummmins factory 12v
Can I hire you to build??
Hey that's awesome man Love the truck. How much it will cost me to get a truck like that one ❤️❤️. Just love it. Best Regards. Keep in touch. Thanks
Dt360 swap?
Can you give me a part number and where to buy the intercooler please
I WANT TO BUY THE TWO SMALL DOORS ON THE RIGHT AND LEFT SIDE CABIN OF THE FORD F 250 CREW CAB 1978, DO YOU HAVE FOR SALE?
Is that the Ford Transmission? If so where did you get your Adapter plate at?
would like to put a cummins in my 73 f350 super camper special, 2wd would there be any problems.
How did you mount the tank ? I have a 38 gallon in my 77 f250 high boy and it’s not in properly
Is it for sale ?
I have a 72 f250 camper special I want to do this to but I already have a 24’ step van with a 4BT that runs great . I am thinking I would also like to add 4 wheel drive as well, I have owned this truck for 30 years. Any issue with adding HP on this engine and keeping it dependable?
Also what are my options for automatic transmission that would have an overdrive?
The transmission with the 390 is just a 3 speed.
So I added tons of performance pets to this 12v and it is very dependable so far. Have 1000 miles on it so pretty new but no problems
Hi i got a 94 obs 7.3 turbo and want to put a 5.9 12v in it how how much would ot cost to do that thanks
I have a 69 cclb f-250 and would like to find where I can get the chrome down the bumpside and at the bottom?
Where did the digital dash come from? Looking for something that doesn't stick out like a sore thumb for a nearly identical dentside build.
Gauges are from Dakota digital. Good complete gauges and would work on any motor platform you would like to install in the dent side. A little pricey for me but everyone’s budget is different. But good quality and I would have to say from personal experience good customer support.
@@rakordus are they really? when i first got my '73 crew ($600 less motor and trans), i already had the powertrain, so I knew what was going to happen with it, but at that point, their stuff was all tacky looking led that did not belong at all with this kind of build. nice to know! i've got a list of parts somewhere to convert most of the original stuff to work with dodge parts, but this has gotten my attention again.
@@dylanpeterson3490 no problem. Ya there stuff really is pretty good. I don’t know the quality of there stuff I. The past. This is the first thing I purchased from them. There is a lot of wiring that goes with it. But the thing I liked about it the most was the god speedometer. No cables needed. Hooks to up to 13 different satellites at once to give you speed going down the road.
Love it. My build is a ‘68 F350 dually, 47RH with billet parts and four link with twin 6000lbs airbags. Work in progress. I would like to to ask everyone to stop rolling coal. Your going to kill our hobby. The libtards see that and the next thing you know there’s some new law that is counter to what we like. I won’t say what could be done to kill our hobby, but it would be a simple thing to do legislatively speaking.
how much power did it make? Interested in selling? or build one for someone (me)?
Sweet rig. What muffler are you running? Looking for one to reduce some drone on a 5 inch system
I used MBRP and really like it. Still sounds good but don’t get the “what did you say” from the wife when she’s sitting next to me. Lol
Awesome. Thanks for the reply. Looking forward to some good content 👍🏻
Hey man I’m looking at doing the same exact thing. I’ve got a pair of 2000 axles and a 6.5” lift kit for a 2000. How much trouble did you have getting the newer axles in?
Ya so when I did mine I had to make my frame brackets work and used the Superduty springs. Some custom brackets. However I know if you don’t want to make them there are people out there just sell the brackets. I also used the Superduty steering box and steering linkage and got rid of the factory box.
RA Kordus I thought I’d have to make some brackets. Did you end up moving the front leaf springs outside the frame like the rear?
@@wyatthoward2318 yes
RA Kordus I appreciate all the help! Keep up the great work. You’ve got some great content!
@@wyatthoward2318 hey thanks enjoy the channel. Have some big plans for the you tube world coming in the future. So will see what happens
I have a 78 ford f250 I'd like to do the same thing with
Love these trucks there awesome
I just saw the video of the 72' twin turbo. What happened to that truck? Did you guys sell it? It looks Great! I am getting ready to start a build similar to that. Just have not found the "Right" truck yet.
Still have it. And love it. Not sure I can part with it.
@@rakordus Well, if you do decide to part with it, you only need to make one phone call, and that's to this guy!!
@@jasonblunt7324 lol thanks.
Did u make custom motor mounts? Did hear that if u did
I got a 77 f-250 single cab long bed 351w with a four speed. Possibly wanting to do a Cummins swap in the next couple summers
No I purchased the motor mounts from diesel conversion speacialists. Forgot the price but I think they were in the 250-350 range.
What part of Wisconsin are you from?
Burlington Wi
What did you do to the frame to carry the wieght of the motor and trans?
Just made some real easy crossmembers throughout the truck and boxed in the frame on the front half of the truck just here and there. Not continuously
next build.....OBS ford
You got it.
would you be wiling to sell the truck?
Obs ford next build
ua-cam.com/video/7lhQBk09kiA/v-deo.html
Im not gonna lie I hate when guys do burn out with their vehicle
We should keep ford, fords especially classics
Why would you want to put a diesel in an old classic american-made truck ? that didn't come with it and son have you tried to fuel up diesel trucks here lately it's astronomical
So you can use them??? Not putting in a diesel would be a waste so you can actually pull with it
Hello, how can I get in contact with you guys? Do you have an instagram? I live in LA and interested in your services.
Yes Instagram is @rakordus
Whold you you be interested in selling it ?
What is with the smoke? Totally unnecessary and shows someone has no clue how to tune. It is possible to have no smoke through the RPM range and increase the HP. Black smoke = wasted fuel.
I am running a 4bt with a virgin pump - it smoked from the factory - up graded to twin turbos and then started playing with the waste gates - temps went down, power went up, zip in the way of smoke. Oh yah the mileage? It went up:)
get rid of those shitty wheels and put real meaty off road tires and deep dish steels on it