DJI Air 2s - Gimbal Motor Overloaded EASY FIX!
Вставка
- Опубліковано 4 сер 2024
- In this video I show you how I fixed the Gimbal Motor Overloaded error on my Air 2s in minutes without any tools.
For Licensing & Inquires please contact:
Jmorris1989@gmail.com
All footage available in 4K
Check out the gear I used to make this video and help support the channel (Costs you nothing!) by clicking the Amazon Affiliate links below:
DJI Air 2S:
amzn.to/3n4jpSu
SanDisk 128GB Micro SD Card:
amzn.to/3zORxpc
Extra Air 2S Batteries:
amzn.to/3yPtlBH
Lume Cube Strobe | Anti-Collision Lighting for Drone:
amzn.to/38FcbMy
Iphone 11:
amzn.to/3yNG1Jo
Sony A7iii:
amzn.to/38L3OyS
Canon 16-35mm 2.8:
amzn.to/38KPfeE
Canon EF 70-200mm f/2.8L IS III:
amzn.to/3zPupqq
Rode Video Mic GO:
amzn.to/3h7CoYN
#dji #air2s - Навчання та стиль
Glad you got it fixed. Great to know a way to fix it! I had something similar happen to me with my MA2 when I first got it. I landed with the gimbal hanging over my landing pad into the grass and on the next flight the gimbal got stuck and gave a warning. For me, it worked itself out after a minute. I believe some debris got into the gimbal from that less than stellar landing.
Since then, I always hand-launch and hand-land to avoid any dirt, dust, or other debris from getting into the gimbal. That has worked out for me and I haven't had an issue since.
I’m definitely using my landing pad a lot more now 👍
I've been using a launch pad for takeoff and landing ever since but it's kinda annoying having to bring it with me. I guess it's time to learn how to hand catch/take off.... thanks for watching my new channel!
Thank you for this simple, but probably more common than realized, solution to a little temporary problem that can be mistaken for a more major failure.
Just doing my part to help out 👍
Yep. I’m bout to REALLY look at it right now..just wanted to check the ‘tubes first. I had noticed it on a ‘twilight” flight last night..a screen warning that didn’t affect any flying mode whatsoever. Tbh, as soon as I became aware, I just RTH’d it and landed. Thanks brother..
Glad I could possibly help 👍
Thanks! I will take a look at my phantom 4 ,which have some gimbal issue ! Helpfuul tutorial Thanks again
Glad it was helpful!
A friend of mine started getting the same error as you. My drone is a year old and DJI says I've flown it over 1,500 minutes. I started to notice dust/dirt was beginning to collect in the area around the gimble and in the cooling vents. I used a little simple green and q-tips to clean out the gimble area and now routinely use my air compressor to blow air through the vents. The first time I did this I was surprised to see how much dust a dirt flew out of the drone via the gimble compartment. Using a mild stream of air doesn't seem to have hurt anything. Hopefully, my preventative maintenance will end okay.
I’ve heard a lot of people saying not to use compressed air on them. Could possibly damage it.
Glad you got it working again, love your videos and music 👍
Thanks. I’m hyped it was such a easy fix
Thanks for sharing this easy solution 🔥
Glad I could help 🤝
Thanks for sharing, very helpful. May I ask what screen-sharing app you are using?
I use Screen Recorder for IPhone. Thanks for watching!
Thank you for your help
Thank you for watching. Glad my video helped 👍
Thanks! also works in the Mavic Air2!!
🤘🤘
Thanks for the Tip👍
Thanks for watching another video!
Hello can you share what location u were in San Francisco when you shot this i just got my drone but i dont find places to fly
I use the Aloft app for iPhone. Thanks for watching
Thanks for the advice , glad it wasn’t to serious 🤞
Thanks. Very happy it was such a easy fix
Hey bud , just discovering your vids tonight as I get into my UA-cam debut with my new Air2s , great content ! I see you've just started uploading this year as well so I'm inspired 👍🏽
I've been babying my drone since I've gotten it so typically launch from a launch pad , but if i were to encounter this error ever.... would you recommend that canned air to blow out any dust or debris as an alternative?
#Subscribed btw 💯🚁
I’ve heard not to use canned air on drones. I would try to wiggle the like I did in the video.
Its help me verry much
🙏
Goodevening (Above and Beyond)
I had the same issue with my drone, mine had been experiencing issue's with Gimble motor overloaded error. I noticed before I saw the error show up, I noticed the gimble was slightly looking down and I was merging the camera upwards and saw the jumpy video as I tried to look forwards. Any idea?
Try using your hand to move the camera on the three different axis when it’s powered off. I could tell something was inside and it eventually worked it’s way out. You can also calibrate it and see if that helps.
Where can I buy signal lights like you?
Tks you.!
lumecube.com/products/strobe
thumbs up really good video.
Thanks 🙏
I love it !!
Thanks 🙏
I was having Gimbal Motor Overloaded error. I tried to manually move the camera, as suggested in the video. That's when I found the packing foam on the back side which I was not aware was not part of the drone (first time flier). Silly me.
😂 👍
I just crashed my dji air2s and feel like crap about it. The props were damaged but I easily replaced those, but the thing I’m worried about is the gimbal. Since the crash i noticed a slight tilt on the gimbal. Although I try to recalibrate it automatically, it doesn’t seem to fix the issue, only when I manually do it. Do u have any suggestions on how to fix this? Also sometimes I hear some noise from the gimbal, like a motor or something.
If the gimble is now making a strange noise it probably will need to be repaired. Sorry to hear about your crash 💥
@@AboveandBeyondFilms hey good morning. Yeah I messed around with it, moving it left to right up and down. Turning it on and off (including take offs/landing) and it seems the noise went away. I’m in the San Diego area , I noticed you made a couple of videos down here. do u know any spots in SD that I could possibly take it over to look at?
Do you notice the tilt, when the drone is powered on
I'll try it!
Similar thing is happening to my AIR 2 and it’s really frustrating
Hopefully this video helps 👍
Motor bearings (propeller, gimbal) and dust should not be mixed.
💯