Rainbow D4, D4C, SE and PE cord replacement manual
Вставка
- Опубліковано 4 вер 2024
- How to change / replace power cord in older model Rainbow vacuum cleaners. Video instruction is to cut the cord inside the vacuum to make thus making it less complicated procedure.
look at some of the spelling and the way some of these criticisms are! get your own vaccum and make your own video if you think it needs to be done better! leave this person alone, he helped me tremendously!!! thank you sir!!!
As many before me have said "THANK YOU" for your Outstanding videos. I was able to watch your step by step video on how to replace the Rainbow D4, D4C, SE and PE cord replacement. I actually reused the two rubber plugs by carefully splitting them down the center and gently pealing each of them off of the electrical cord.
Thanks again for your video. It made the task very easy for me.
P.S.
I think this unit is like 34 years old and still going strong.
Thank You for this excellent video. Nine years later we are still getting the help we need.
Rainbow repair shops are becoming hard to find around here. But some of us keep ours running anyway.
Thanks again !
Good Video. I use professional closed-end splices instead of wire twisting and tape. 17-gauge wire is odd-ball. And this cable needed to be replaced due to abuse, not Rexair low quality materials. And I would suggest: With the with top off, check motor brushes while you are so close. These are solid machines.
This was very helpful! Thanks very much for taking the time to video & share this.
Thank you so much for the video. It saved me from a lot of trouble. I was afraid to pull out the gasket although it was so obvious that it was the only way. But I was still thinking that for such an expensive devise they wouldn't use just glue!
VOYER07, I stopped taking mine apart, to come do a UA-cam search, on disassembly. (Wound up here.) I knew that part was attached I just couldn’t figure out how to get it off... and i kept turning the gold bold in the center... trying to loosen it... I gave up cause I noticed it just spinning round and round... I sucked up a bunch of drywall recently... and it started throwing out a lot of dust each use... so I just banged the sides, like an old tv... until I got the dust out as best as I could. Then, put it all back together. My dad got me liking rainbows because he used pineal in the water! It made the house smell good... I’m using fabuloso and pine sol lol
Thank you. This video came in handy. I have a D4C and was contemplated if I should change as it is only 2 prong verses having a ground on it.
They have gone a long way since D4 and SE models. This has been resolved since. They have implemented many more innovations than the most (if not all) of their competitors
Thanks
You are CORRECT. However that would open whole new can of worms with some old switches falling apart, improperly used or not used cable ties and aftermarket cords that would be pain in the neck to insert as they do not have soldered ends. This may be hard to deal with for less-experienced self taught mechanic :-)
dont use wire nuts or even worse just tape. the vibrations from anything with a motor will slowly cause the connections to come undone. THE ONLY PROPER REPAIR IS TO SOLDER IN A NEW LENGTH OF CORD
@Virimpa Take the vacuum apart to the point where we cut the cord. Take 4 screws out holding plastic motor cover (white piece in the video). You will see brushes there. They are easy to replace.
Goodvac. com
Hello can U tell me what is glue name?
Man, I was wondering what that awesome song in the background was.
"four thirty-three" by John Cage
Very nice vid! Any video about changing the electric engine brushes?
Please show how right the cooling fans assembled, the sequence
Are u supposed to fill the tank on the dc4’s each use, or just when ur vacuuming; dust, drywall, and such?
You don’t have to remove the foam ring I take apart and service these models and I’ve never done that saves time and glue
u'd think as expensive as those things are they could make a cord for it that would last the life of the product??
I think it's endemic to all appliances, but especially heavy duty appliances like vacuum cleaners. The cord is subject to lots of wear and tear. And changes in heat and humidity affect the insulation of the cord as well.
Although, if the cord was shielded with a stainless steel braid, that would solve most wear and tear issues for possibly the entire life of the unit.
Removing gasket/seal on the bottom - just tear it off. If wrong type of glue was used you may end up having to destroy bottom fan casing and purchase new baffle (big plastic piece that covers the bottom). Use weatherstripping glue when installing new gasket.
Go to Goodvac.com and search for "glue"
My on/off button want turn rainbow off
Good evening, on having ignited my rainbow it does a strange noise, has good power but there is listened convict, who was happening to him?
Many things can go wrong and make sound but this is very likely to come from the motor and/or fan-case assembly (part of the motor assembly). Replace whole motor unless you are pretty good at taking things apart and PUTTING THEM BACK ;-)
i need to see how to wire tha on off swich
What kind of cord is this and where can I buy one?
You can buy one directly from www.rainvac.com/ (RainVac). They are excellent at repairs but will sell you genuine parts as well.
does anyone know how I could bypass the safety switch on my SE ??
What switch are you referring to? This unit has only on/off.
The Rainbow,dose have brushes.
Don't do what this guy does cutting & taping the cord. Dumb advice & not a proper electrical repair! What you actually do is continue to remove the cord to the switch at the handle. You can remove the 2 wires from the switch (white and black) by inserting a jeweler's screwdriver right beside the chord you are trying to remove and give it a little tug. The soldered ends will just pop out, and you can insert the soldered ends of the new cord in place - easier and safer than connectors or tape!
Any one who does this just use wire nuts. Please do that they are not expensive
Still this video was a great help for me to understand it
A vacuum cleaner With a gun and erd
D
what glue did you use?
It was yellow glue.... ;-)
@@OlekRahmel Que marca de producto.
It is Permatex 80638 Super Weatherstrip Adhesive, 2 oz. You can get it on Amazon for about $4 in 2020
Also, GoodVac used this one: Permatex Weatherstrip Cement DCD-19
Yes, only in the E2
If they did how would they sell hundreds of thousands of cords then? Nobody would need spare parts :-)
Fast and cheap twisted "sheet". Fill full of water and dance...
DON'T TOUCH MY RAINBOW !!!
Splicing? WTF
Getting wires out of the old style switch (originally installed on there vacuums) by inexperienced person may often result in breaking the switch and having to buy new one. New ones now come with 4 wires and would require splicing anyway..
Please don't ever do that to any of the rainbow. These are the ones I get brought to me that have caught fire. You can't do the job correctly don't do it. There was no reason to slice that wire.
My on/off button want turn rainbow off