Brother ScanNCut Tips & Tricks - Direct Cut vs Scan to Cut Data - Sending Hearts Paper Pumpkin Kit
Вставка
- Опубліковано 29 сер 2024
- In this Brother ScanNCut Tips and Tricks tutorial you will learn the how to use the Direct Cut and Scan to Cut Data features of the SDX125. The stamp set we are using is from the January 2021 Paper Pumpkin Kit - Sending Hearts. Most of these features are available in any model of ScanNCut you are using. Throughout the Brother Scan and Cut tutorial, I compared the capabilities and limitations of each feature. Direct Cut is used to cut stamped images or patterned paper. You can create an offset or outline distance and cut additional layers by switching out the paper on the mat. Scan to Cut Data is used when you want to save the outline or the inside and outside lines of the stamped image or patterned paper you are scanning. Once you save the cutting data to your machine and then retrieve the file, you have a lot of options. You can duplicate the shape, resize it, rotate it and edit it in many ways. In the SDX models, you can also create offsets for both the inside and outside lines when you are using Scan to Cut Data.
• Brother ScanNCut SDX125E: amzn.to/30fojAU
Shop at my Stampin’ Up! Store
paperedchef.sta...
Subscribe to Paper Pumpkin
www.paperpumpk...
-------- Supplies --------
• Poppy Parade Classic Stampin' Pad [147050] -- bit.ly/3hOJb8P
• Tuxedo Black Memento Ink Pad [132708] -- bit.ly/3gzhtdZ
• Basic White 12 X12 (30.5 X 30.5 Cm) Cardstock [159231] -- bit.ly/3bORsZz
• Stamparatus [146276] -- bit.ly/39UgSCr
• Clear Block D [118485] -- bit.ly/2T3DhF2
• Little Love Boxes Add On [156842] -- bit.ly/3bssUoQ
I know this is an older video, but I just got one of these and I really appreciate your videos!!
Glad you like them! My videos as never "too" old even if you can't get those products anymore. I appreciate you watching and taking the time to comment Sheri.
Thank you. You explain this so well.
I enjoy learning the difference between the two. At my age I don't always remember what to do.
Deborah. Nothing to fear. I always like to start back at the beginning. I make no assumptions and let each tutorial stand on its own. That is the plan anyhow. Thanks for watching.
I use the direct cut a lot with the .04 outline around my stamped image. AND when I want a shadow of the same image. After I have done the direct cut of my stamped images I use the back arrow and adjust the outline to .08. I place my shadow cardstock in the exact location as the previous piece of cardstock (with the stamped images) and I select cut and it cuts the images in a bigger version. I then layer the 2 images. The important thing is you have to hit the back arrow and cut your shadows before your machine turns off. I am sure you know all this. But I felt like sharing. Thanks!
This tutorial really helped me out. I was having an awful time learning this. You made it clear and enabled me to make my own Cheat Sheet.
You are very welcome. I'm glad I could help!
You’re the only one does it better than the original Brother’s promotional videos. Thanks
Thanks so much. I appreciate that. I just do my own thing. Not affiliated with Brother at all except that I am a loyal and frequent customer of theirs. I am on my 3rd ScanNCut. Love them. Glad you are watching.
@@PaperedChef can I find a list anywhere with all your videos. You are amazing
@@kathrynpalmer7438 Thanks Kathryn. There are hundreds of videos on my UA-cam Channel so look at the PlayLists to find them. In my main channel information. There is a ScanNCut PlayList for example. Glad you are enjoying my videos.
You really have a gift of teaching! Do you have a career in teaching? If not, you certainly should have one! I've never encountered anyone that has the patience and time to explain in such great detail, as you do! You are like a walking and talking instruction manual with a glossary! I love your techniques, and may you have abundance of blessings for all the time and hard work you spend on sharing your knowledge and experience of cardmaking with the brother scan n cut, and other various crafting mediums. You got this! 😀👍❤️
You made my day with your beautiful words Karly! I was a teacher professionally and now I’m a full time professional crafty with teaching being a big part of what I do.
Are you using the scan mat to cut? So much easier than changing mats each time. Your tutorials are the best I've seen - so easy to follow - thank you.
I've had a few dedicated scanning mats in the past and they quickly turned into cutting mats. I think they are a total waste of money. You can scan and cut with the cutting mats. That is all you need. Thanks for watching Lorna and I am glad you like my tutorials.
@@PaperedChef i've downloaded your Canvas course. I've had a S N C for a few years but had trouble from the word go. I've spent hours trying to sort it but no joy so I've ordered the 135SDX which should arrive in March so I thought I'd do some practice beforehand. I'm so glad I found you. I'm a hobby demo with Stampin Up.
As a new user to this machine, I am so thankful for this information.
You are Hands Down the BEST teacher of the Scan N Cut & sharing your creative thoughts and techniques! Thank you!
Thanks for the LOVE! I appreciate it Debbie. I love teaching how to use the ScanNCut because it is my favorite type of machine in all of my fleet. I have a lot of courses on the machine. Here is the description of them.
thepaperedchef.com/brother-scanncut-courses
Just purchased a Brother ScanNcut SDX85S. With your tutorials I am in love with the machine! Thanks for the great instruction. I use Stampin Up products also, so your YT channel is a perfect place to learn!!
Kathleen, I appreciate your comment. When we have a ScanNCut and Stampin' Up! products, we get the best of both worlds.
Thank you so much for all your tutorials. You have taught me so much.
You are very welcome! I’m glad you’re watching.
Great tutorial. I've only ever used the scan to cut feature and never used the auto layout feature. Love this.
So glad l found you channel have been struggling with using my Brother scan n cut.
Glad I could help! Struggle no more. I have courses that can help too and before the end of January, I will post my latest coupons to this page. Thanks for watching Maddy. thepaperedchef.com/brother-scanncut-courses
Oh my what a great video. You are a terrific instructor...I’m going to take out my Scan n Cut and practice
Thanks Rosy! I appreciate you. Practice makes perfect!
Thank you. I made a few hearts while following along. I also made a few bigger so I can have layers. Another great video!
That is what I love to hear Nancie. I like when you apply the skills right away. I made so many and had a lot for all of my card projects. So much fun.
Very good tutorial! This is the first of your videos that I have watched, probably because I searched for January 2021 paper pumpkin alternatives, And your video showed up on my feed today. I am an experienced scan and cut user With an older SNC machine, add an experienced card maker, and you still gave me lots of new and useful information.
Thanks Reina. I am glad to know how you found my video and I hope you subscribed to my channel. I always like to provide tips for newbies and seasoned crafters like you.
You have given me confidence to get my scan n cut out of the box, thank you so much.....I love your tutorials on the Brother machines....
I'm so glad! Your poor machine is like "Let me OUT!" It wants to be your crafting buddy. Thanks for watching Jeanne.
Thx so much, you have brilliant video's!
Great video - cleared up a lot of confusion I had about this subject. Regarding cleaning a mat . . . our local Sewing Warehouse team discovered (not sure how) that Vagisil cleaning cloths work way better than the often recommended baby wipes. Not sure why but they work great.
Thanks for the video paperchef I needed some help ,I have not learned to use my scan n cut yet 😊👍❤️
OOOOOOO FUN FUN FUN THANK YOU!!!! I LOVE IT!!
Thanks for watching Mary. I'm glad you like these tips & tricks.
I really enjoyed this video and once again learned so much. Awesome!!!
Thanks Granny! I appreciate your comment.
Thanks a bunch! Very cute alternative card you made! 😘🇨🇦
Very cute and very informative
Beautiful cards, and great video - thank you!
You are so welcome! Thanks for watching.
Cute cards!
I agree the scan n cut is the best !
Thanks Denise, it is a real game changer for sure. Thanks for watching.
Thank you for such clear instructions and also creative ideas! Waiting for my ScanNCut to arrive! Looking forward to learning from you!
You’re so generous and amazing Kim. Thanks! ❤️
Thank you for keeping on making Scan n Cut vids! Can someone please tell me if the mat issue was ever fixed?
Gosh, if I had to fussy cut those hearts, they would look horrible! Probably look like some type of a weed! But I love how you showed us the difference between the PP heart and the SNC heart. Awesome video. Those cards are so cute.
Thank you for sharing your knowledge
My pleasure Millie. Thanks for watching!
Absolutely love your alternatives! Thank you so much for sharing🇨🇦
Thanks Brenda. If you love these two cards, then check out my video where I shared 30 projects I created from this kit. Glad you are watching. ua-cam.com/video/dLIp-gdeAZk/v-deo.html
Thank you so very much,ive learned so much .i want to buy one. Only because i just cant use dies anymore with all my pain.but for me to remember all this would be a problem for me.
Thanks for watching. I have courses which teach these things one step at a time so it would be easy to learn if you pace yourself. Glad you are watching.
Nice job! Very creative :)
Just found your channel. Love your alternatives! I hate fussy cutting-edge! Been thinking about a cutting machine but don't know much about them. This one seems pretty easy. TFS!
Thanks for watching Jackie. Yes, this machine is pretty much the industry standard right now. It will be a great machine for you. • Brother ScanNCut SDX125E: amzn.to/30fojAU
Is there somewhere I can see all your videos listed? You are amazing.
Thanks! You can wash them with warm water and soap. Here is how to restick them. ua-cam.com/video/Y9wdsgFL0fY/v-deo.html
Hi, Papered Chef. Thanks so much for all of your BSNC videos. They're so helpful! Question: When I scan stamped images, the machine always cuts in jagged edges all around, even if the image is a circle. Any tips on fixing that, please?
I love them thank you xx
I do want to get the new design ink pads from Stampin' Up. I hope the new design doesn't let ink get everywhere. Several of my pads have ink all over them from it leaking out and I have never reinked them. I'll order through you in a few months.
Kelley, that only happened to me once with the new style. It was way too juicy. I have about 60 of them and most don't do that so the new style is good. It took me a long time but my collection is finally complete. I look forward to having you as a customer. You know where to find me when you are ready. Don't forget that during Sale-A-Bration (ends next month), you can earn a free item for each $50 spent.
Thank you! I have the older scan and cut and I still find your video’s useful. Could you stamp the image and then cut it out the heart!?
Lisa, thanks for watching. With a shape like this, you would get a LUMPY edge. I should have mentioned that. It would be uneven if connected at all. A hot mess. You need a nice line to scan in order to recognize the shape. There are too many hearts in this stamp but I have loads of videos on cutting out stamped images. The multiple hearts is not one to scan and cut due to not having clear edges.
Really like how you utilize the Scan and Cut. If I want the gold border would I have to cut a heart out of gold paper and just increase size?
Thanks Judy. Yes, that is right. You increase the outline distance to 0.04” or larger. Then, replace your white cardstock with gold cards to and cut it out. I have many videos on cutting any layering stamped images but I think you get it. It is how I got the Pool Party hearts I used in this video.
I don't have a stamp kit so can I print and scan to make the cute snails on scanNcut🤗🤔 hey Papered chef have you've heard they're is a rotary blade for the ScanNcut check it out I'm so excited 😊🥰🤗🤗
ty
Hi! Do you have any video showing how to use the other features like "emboss"? most of the time, I see demo of cut. Thanks!
Sure! Here’s a video I did but I’m not a big fan of embossing with this machine. ua-cam.com/video/LdndV8PG458/v-deo.htmlsi=6kBdZDiDksbGGBia
TFS
You are so welcome!
I loved this video. When I am using scan to cut data, just as you did , I saved one heart. When I then retrieved my heart it only show it on a 6 x 6 mat size and I can’t seem to change that so it would not let me auto layout stay 6 hearts. Please help. This issue has happened before and it really prevents me from using auto layout.
Hi Sheri, you can change the cutting area so that you can cut on a different size. Here is how. Thanks for watching. ua-cam.com/video/sLy1_hKlJwI/v-deo.html
@@PaperedChef Thank you, Kim! You’re the best! It’s working just fine now!
Love this Video! I want to get a Scan & Cut so bad. Which one do you recommend? ❤😘
Hi Traci. You will love it. It is a great craft buddy. This is pretty much the industry standard right now. You don't need to pay extra for a Disney model, etc. • Brother ScanNCut SDX125E: amzn.to/30fojAU
@@PaperedChef thank you so much! I will not buy stamps without dies because that's how much I Despise Fussy Cutting 🤣🤣🤣
@@PaperedChef So I clicked the link & it took me to Amazon wich is fine but I read all the reviews & honestly they are scary. Many are from recently. It's alot of money if it's not going to work. What is your oppinon on this? 😊
@@tracilord4854 I have the machine. I didn't read the reviews. Let me guess. The mats SUCK! That is true. They don't stick worth a darn. So, I have videos on how to restick them with 2-way glue. Up to you. I don't represent Brother. Do your own research so you don't get mad at me if it doesn't work out. I have 3 machines and love them all. The other models of machines are older but I do like my CM models better even though they are older and don't have as many features.
On saved data can you add the outline like on the direct cut in the cm650 w
Could you have stamped the hearts and then do the scan n cut processes?
I have the very original scan n cut. Do you have any videos on that one? You teach so well. Thank you.
Thanks for watching Barbara. I have courses on two different models of ScanNCut and UA-cam tutorials on two models. Here is a Basics series to get you started. Check out my PlayLists for loads of videos on the ScanNCut. ua-cam.com/video/NrXTxdJz2cY/v-deo.html
I always thought if my paper was bigger then 6 inches, I had to use the 12x12 setting. I see now that it is ok to have bigger paper and as long as the inked part of the paper is less then 12x6 I can use that setting.
Nancy, you can use that setting whenever you just want to scan something on the top of your mat. It is just a little faster because the entire mat doesn't have to be scanned. I am glad you have a new setting to try. Thanks for watching.
Hi Paper Chef....pls give a tutorial on how to cut in side the letter 0ADBROR WHEN YOU HAVE AN IMAGE THAT HAS A HAND ON THE HIP AND U HAVE TO CUT WITHIN THE HAND,,...,I SURE PRAY U UNDERSTAND WHAT I AM TRYING TO SAY....TY
for the scan to cut, what if you have a specific size piece of cardstock? first timer scan to cut!
Once the Michine and you don't save what if I want use it later
Oh yes, I do save some of the projects to use them again later.
Could you cut the heart with the gold foil like the sample
Yes, you can Michelle. Switch out the paper and cut away.
@@PaperedChef thank you
Is there a stamp for the cute dogs I see on the box?
Oh yes! That was actually a square card Barbara. The stamp set is called Hot Dog and it is available now. Great for ScanNCut users. Hot Dog Photopolymer Stamp Set [154497] -- bit.ly/35bu5F5
@@PaperedChef That isn't the dog on the box. The dogs in link you sent are dachshunds.
Do you have to use 12 inch paper with this machine or can you use 8 1/2 x 11?
Marilyn, you can cut paper your mat size or smaller. Here is how to change the cutting area. Thanks for watching. ua-cam.com/video/sLy1_hKlJwI/v-deo.html
Whate blade depth would u use for DSP?
I use a blade depth of 3 for Stampin' Up! DSP.
two hearts... inner and outer-line?
Getting me one (DX) today and was wondering can you scan and cut magazine images??? If so refer me to your video please.
You can only scan and cut the OUTLINE of the magazine image. I have shared how to cut patterned paper on my channel many times (check Play Lists) but that paper is delicate so you would have to lower the blade depth a LOT.
@@PaperedChef can you glue magazine paper on card stock then try? What do you think. I’ll be Joining your membership soon
Is there a way to clean the mats on this machine?
I just wash them and restick them. ua-cam.com/video/Y9wdsgFL0fY/v-deo.html
Can you cut fabric?
Yes, of course. You will need a fabric blade, mat, etc. amzn.to/3MZvzcD
Have you done a Udemy Course covering the how to cut data including the Enhanced Image Tracing?
Christine, I don't have the Enhanced Image Tracing functionality. It is not part of any of my courses. I would like to get the card. It was not readily available when I looked.
@@PaperedChef Thanks for replying I live in Australia and bought it here. It’s very good but a little hard to work out how to use it. I’ve really enjoyed your courses hope you do lots more.
Hi where do I get the kit with the hearts stamp ect please
I know i have written you before about scan and cut sdx 125 and i know you have problems with your paper loading i can load the mat from the other end it is crazy.
Bekki, the CM models of machines let you load the mats from both ends. The DX models only let you load the mat in one direction.
Is it possible to duplicate the black scalloped border?
Yes, of course Jan. You can duplicate what you scan in by using Scan to Cut data. Here is one of many tutorials I have on this topic. ua-cam.com/video/uoCPcvFKEoQ/v-deo.html
thank you for your tutorials. I have some problems with my ScanNCut when I cut the stamps because the white border (around the image) is not perfect. it happens that the image is not really at the center and so, the white border is thinner in some part and wider in other. Does it happen to you too ?
You are welcome Mascia. Oh yes, that happens a lot. That is why you need to do align your machine once in a while. Here is a tutorial. ua-cam.com/video/8EVcwMewrWQ/v-deo.html
@@PaperedChef thank you so much !!
How can i take your canvas workspace course
Here is information and links to my Udemy courses. If you sign up for updates, you will also be notified when I have coupons. thepaperedchef.com/brother-scanncut-courses
• Brother ScanNCut SDX125E: amzn.to/30fojAU
Subscribe to Paper Pumpkin • www.paperpumpkin.com/en-us/sign-up/?demoid=2166056
with regards to scan to cut data, when using designs created by another designer/company, you can only do what you have done (scan to cut data), if those who produce the heart cards give specific permission, either in their copyright permissions, their angel policy or their Terms of Use, for it to be copied and stored on your machine - which they vary rarely do!. In doing what you have done, unless they have given permission for it, you have breached their copyright and are teaching others to do the same.... thats not legal. Its not your own original design....it belongs to another artist/creator and you should have definitely only have created your own heart within the machine. Just because you can do this with the machine, it does not give you the legal licence/copyright permission to do it....it comes under making a derivative work from someone elses property.
albertsstuff