PS4 Broken HDMI and 7 missing pads - Is it Fixable and why we block users
Вставка
- Опубліковано 16 лют 2023
- ⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - Наука та технологія
I missed the "press and hold, wife is calling: don't pick up. Press and hold, there are thieves in the store: let them take whatever they want. Press and hold" 😂 too good.
and dont breathe
@@djevrek too funny 😂
Yes...Press an hold, but Remember to call wife later...
Bb high
@@paolomonai9511😂😂
I learned a lot from this channel... I even bought a microscope and a full set of tools because I loved what I 've learned here and I enjoy applying it in real life.. I am not in repairs field but I can tell you that I have saved a lot of money by repairing my stuff myself and for the relatives too..
Amazes me how big boss knows how to disassemble and reassemble so many pieces of hardware without a guide. I get it comes with experience, but this guy can take anything apart safely!
Now I know finaly who big boss is!! Its his uncle!! 🙂
Really????
Big boss is the boss of all bosses.
We know this years ago
@@milandjukic88 how?
Big boss is solid snake sr 🤣
Great video Alex, you have great patience to not rush the fix so you can fully explain to viewers the correct techniques.
Always enjoyed the occasional childhood backstories during a repair. More storytelling in future videos!
Just found your channel and I love how dedicated you are to your work and the smile on your face when you fix things 👍
I thoroughly enjoy your videos. Not only does it help gain more knowledge on how to approach an electronics challenge, you provide valuable insight as to how you work more efficiently. I do miss a lot of sleep, because I am in a different timezone very often. And even though shipping stuff from your shop to me (Amsterdam region, The Netherlands) will be quite a substantial factor, I still feel you deserve our loyalty for all the educational things you post on a regular basis. Keep it up, Alex!
At present, I am both working and vacationing in Hong Kong and Philippines. It is already close to 6AM. I'll hit the sheets when your video is done. Sending kindest regards from Manila. ;-)
One more thing ... Thank you so much, shukran habibi, merci beaucoup!
Hi Alex can you please please make a quick video about how to inject voltage and where you inject it, eg through a test probe or alligator clip, and a video about how you check mosfets would also be awesome!
Some quickie type videos, would be a fantastic addition to your channel!.
Keep up the amazing work my friend.
From Australia!
Going back and looking at footage from the first part of the video you can tell that trace to pin 8 is broken close to the pad. It is so hard to notice and I never would have seen it until you started testing and had issues. Crazy it's hard to see even under the microscope. Excellent repair as always!
I saw it, but I'm watching on a 70" TV, kinda cheating lol.
7:58
@@Jencha010101
Yes and really as early as :21 once you know it's an issue.
Anti glare light is your friend tho ,
Am always in for the videos...this is one of the tedious hdmi fixes....thank you for your dedication and marvelous exposure to teach us how its done.....
I like your advertising your products , makes it easy for me to know where I can get your tools. I watch a lot of different types of videos and then I have to spend 40 minutes trying to figure out where I can purchase the product . Being a person who can never find the right tool and in the has to build something himself I enjoy knowing where to get the great tools you use .
Nice job, good to see it put back together and working! Hope to see more of this
Have a great weekend with your family. And thank you for all of this content. I watch it every day and continue to find it interesting.
Very proud how far you've come! I remember hearing stories about when you first started. Which was very inspiring for me. I was there once too. Thanks for the videos.
10:25 - I greatly appreciate that you advertise your products, especially when they line up with the job you are working on. It's really helpful!
congratulations for your work. You make something super complicated to do look so easy. this is incredible !!
i started watching your videos two months ago.. and i got somehow addicted. i dont know how many i have seen but i am close, i will see all of them (which are A LOT) within next month. I started watching because a am a "proud" owner of an HP spectre x360 with the usual issues. i managed to "fix" the problems without soldering but i got stuck to your videos. awesome !!!!!!!!
Proud to be one of your viewers and i wish you more success because you truly deserve it , god bless you & big boss , i really hope that you can get the warehouse that you made a video about , it's really a very nice & large place , أخوك نديم من مصر 🙂
Nice work as usual, you have set a standard of work quality, and made it hard for the others
Alex you are happy in every resolution and we are happy with your reaction, nice work again !!
The skill is so impressive, not just the repairing which is amazing but big boss disassembling and then reassembling everything again.
As someone that used to repair SMC at a casino, I know just how difficult some repairs can be. Thanks for the in-depth videos that you provide to the community.
What sort of person to have to be to take the time to comment and complain about the guy advertising products in his video. I bet these are same type of people who obliviously watch other youtubers rave about products without declaring the video is sponsored.
So nice to see big boss working, confident and systematic 👍🏻 best regards from Norway to all of you
At 4:18, I already noticed that the track to pin 8 was broken. I thought it was because of the glare from the light. Still, I wondered, if you would notice it, if it was indeed broken. I remember that normally you only look at physical integrity of the pins (correct me if I am wrong). But in the end, you did look at continuity of all the pins before sending it to Big Boss. Thankfully, because that would be a waste of your time. That just shows again what a genius you are. Every time I learn more from you! Thanks!
I like the video of Big Boss Assembling! Nice touch! Another great video. I've been in Electronics for over 35 years and I get such great entertainment watching your videos. You take great pride in the Quality of your work! Thank You!
Ive been following for days now and I really like your works, you inspire me alot. I want to be like you some days to come. I love electronics.
Alex, loved the view from big boss assembling the console!! A great improvement on your videos I'd say. Keep up mate
Wait ... there are people who dislike you promoting your very own shop? What do these ppl do with other ppls videos who have sponsors? I cannot wrap my head around that. Your repairs provide me with valuable insights into all parts of electronics. And if I ever plan to get into repairing I would by the stuff you use, all the better buying directly from you.
Please keep up the great work.
They just don't understand this is a business. Being smart is too expensive for some people
@@tobiasmangoma9566some people are smarter than others, thank God for that.
Ths for the great content, I am from Brazil and watch your channel almost every day.
Love your product plugs - this is a business .... and he does a great job! Love it!
Nice to hear a little family history.... Big Boss is keeping an eye on you.... Have a good weekend Alex.
Im following you from lebanon, and i watch your videos on daily basis, your videos are awesome cheers mate
I found you by accident I'm glad I found you. I've been Southern since the seventies and then moved over the Microsoft ring and you are correct it takes a while to learn how to use A microscope I am very good in solder both standard and micro but I've learned so much from your videos I look forward for your next video.
Hi Alex , greetings from the UK . really enjoy your videos i have been inspired , Electronics has moved on in the last 30 years , I trained in Marconi back in the early 80s . i remember a mobile automated lab coming to our place that was making SMD circuits .
I have set up a basic station in work inc a budget microscope and have already repaired a few parts , thanks to .I have to say you have an amazing dry humor that makes me smile daily
look forward to the day i can afford to buy some of the great products you are selling . Andy
Your sarcastic comments is top tier, Alex. Thanks for your amazing lessons :)
As a fellow New Yorker it's nice to know you were born here and a good chunk of your education was here. Love the work you do
Thanks for doing these videos! You are giving a very valuable thing for free - work experience. I want great things for you and those you care about!
Just placed an order yesterday. Thanks to your dad for shipping so quick. I would suggest linking the video you did comparing Amtech 213 vs 559 on the product pages. Thank you!
Brilliant video. You have such skill and patience.
You make this look too easy. Awesome 👏 .. I buy supplies but unfortunately they do not come packaged with your skills. That would sell really well. Look forward to the next video 👌👌💥
I for one am glad you advertise. If not for you advertising I would have not seen the NF.Short Power Supply Short Injection tool and bought one. I have been in automotive repair business for years and it never gets old of slurs from the jealous type. Keep up the good work. I see other tools I am looking to buy in the future.
وانا كمان والله متابع لك من ثلاث سنوات منذ كان عندك المحل الاول الصغير ثم اشتريت اللي جنبك وانا سعيد من اجلك لرؤيتي لك وانت تتطور في عملك اضيف لك شكري لأنني استفدت كثيرا واستفيد دائما منك وكم اتمنى انك بجانبي لأشتري المعدات التي تعمل بها ولكن انت بعيد جدا مني اتمنى الحصول على شئ واحد وهو الفلكس فهو قد يساعدني كثييييرا بحثت عنه كثيرا في بلدنا ولم اجده
اما فيمن يتذمرون عن الترويج لمنتجاتك بالطبع يحق لك ذلك انت في مركز عملك فلا مانع من الاستفاذه من كل شي اما الناس المتذمرون فلا تعطيهم اي اهتمام ولا تسوي لهم بلك حتى خلي الكل يستفييد
تحياتي لك اخي حسين واتمنى لك التوفيق والنجاج مع خالص مودتي
Another great video! I noticed at about 3:57 a small gap is visible in the line very near pad number 8, so that's probably what caused the difficulty... I wanted to yell out when I saw it, but of course you could not hear me in the past! Thanks again for making, editing and posting your videos!
Correct I saw that pin 8
man, you are serious crazy talented at this man!. good for you!. your buisness Deserves to thrive when you are doing this type of work and the quality you put into this type of work. i love watching these videos. i do not mess with Soldor at all, but maybe one day i wont even have think about it watching these videos. such Detail.
Alex, I am happy for your success ... you and Family work hard and deserve it.... Thank you for the work you do...
Thanks to your advertisement I have been inspired to do more repairs and yes, I will be buying things from you because I know it works!
Love watching these videos, also enjoy seeing Big Boss do his thing, more of that please.
Your upload time and my wake up time are pretty closely matched. I don't get what's wrong with people, you learn from successful people. Respect, my father was an Electrical Engineer who specialized in heavy industrial power. Anyway, have a great day! 👍😎
Greetings from Germany. I love to watch your videos. I wouldnt try this on my own, but it is nice to see you doing this. Keep up the good work :)
i find it interesting in what you do. i know nothing about what you do but enjoy watching you.
yes we are happy for you alex! and we appreciate what you do! keep what you do the way you like no matter who says!
in this world of entertainment, your channel is full of it and lots and lost of Knowledge, keep it up. you're the best
I like your advertisement, knowing that you put a lot of effort in your video production and the revenue coming now is what you deserve for your work ♥️
I am from the Netherlands and I love watching these videos I learn a lot of it I don’t have the tools but still love to wacht so keep up the good work 💪💪💪
It is a happy day when this channel uploads a new video.
A Very informative video cast. As usual 😎👍. Intelligence on all levels. Keep up the good works. This is most needed in this country. ❣
Im a new viewer but boy i do like your work...its kinda relaxing ...keep it up! :)
The repair you did on that flex cable video had me amazed
Bonjour 👋 je vous regarde depuis la France, et je suis très impressionné par votre travail, merci pour toutes vos vidéos.
to be honest i do not like advertisment... but im totally gets your point and totally understand why you doing it and as far i decided to watch your vids i got to agree to accept it...
im happy for you the buisness going well and wish you to continiously grow... you had been working hard for it for long time, i do see effort you putting on your work, so good luck and all the best ...cheers sir
You do awesome work love it I went to school for soldering an way you do repairs is close to what I trained for in 1986
I love watching your videos and I love your thought process. I have learned a lot from your videos. Please keep the videos coming!!!
Great fix and really enjoyed watch. Great work Alex 👍
Another great repair, perfect job. As always.
Well, it is your business, your channel, your work and your videos. You are totally free what you wanna tell us, show us and do with your channel. It is your business and you have to earn money, for your business, your family and your co-workers. So you have to make ads. Thats totally normal and thats fine and informative for us viewers and fans. Every shop or everyone who wanna sell something has to make ads, talk or show their products. If you don't do this, you can't sell something....thats it.
Thank you for that video
Nice to learn a little bit about your upbringing and history.
i personally like how blunt you are when talking about customers. you are running a business. plain and simple
Great to hear some of your backstory! Oh, as well as looking at your approach to repairing electronic things.
Oooh this is a lore video!!
Great video as always, also great repair
Your work is is amazing to watch!!!
how cannot tell you im happy to see your videos and your ads, ofcourse you must do it in your videos and also i need to said THANK YOU im in china living in china and i watch all your videos and i learn a lot and still learning i bough many tool and i try to fix everything my friends throw away my big challenge is my sons laptop is not turn on so thank you for share your knowlege take care an please keep showing us the happy face when you fix something doesnt matter if you do it 1000 times but you still show you happy face....thank you
Peace be upon you, my brother Alex. We love you from the bottom of our hearts for your honesty in what you say and do. We wish you success always.
You are very competent and sympathetic. I watch your videos very much, apart from that I can improve my English, you are very well understood.
Good that you measured 8, you kann see on video that 8 was brocken and no connection...Great Alex, and greating to Big Boss 😊
I would definitely love to have a northridge fix in this part of my country...
I do try to replicate the same level of super fix solution but i do not have sufiscated tools like you....i admire becoming lik you ....thank you once again...
All I can say is your great at what you do, furthermore I love your sense of humor..
I like the fact that you promote your products and services because that way I know that if I need something to work on my electronics I can order it from you. I would rather support your small business rather than support some huge conglomerate that doesn't care about it's customers. Thanks you for showing us your products.
I love how, after all the repairs you've made you can still get excited about a project like that being successful.
I Admire your attention to detail Love your videos Intriesting as usual
Another fantastic job Alex x
Great! You have a superb patience
Great to see Big Boss at work he is the Boss of all Bosses 😀
Great to hear that you are a new yorker my friend
Great talk as always (besides the great repair job of course!)!
Bro, I see u grow. And I love Ur contents. Love from Bangladesh. May Allah always with Ur success.
thank you very much for your amazing videos sir Alex, it's way BETTER THAN FACTORY tutorial! its learning while enjoying watching.
Big Boss on fast forward. Another excellent video.
I like how at the end Big Boss always has the poker face at the "Boss of all bosses" line. He has already accepted the fact that he is the biggest boss of all bosses :)
You're both skilled and entertaining so no wonder you're successful 👍
Great Job Alex👍👍
Alex it's strange that you mentioned where you're from because I was thinking to myself yesterday where are you from? So my question basically got answered today in this video thank you 😃. Keep up the good work and don't worry about Negative people they are just jealous of your success and your trade.
Knowing that you're from Lebanon is awesome, I'm from JOHANNESBURG South Africa.
I'm very impressed, Alex. And making sure your kids can speak Arabic will help them so much. I love languages and my first language is English, UK variety, which I use for writing fiction, but I can speak French quite fluently, some Spanish and a little German. And I include computer programming languages too. Mainframe assembler, PL/1, REXX etc. and some PC languages including VBA. But I'm now retired and don't use any of my skills learned over a lifetime. I just sit back and admire skills that you have. I did make an elctronic organ from a kit, but there were no surface mounted components. I did get good at soldering - 2000 components gives a good training, but I don't use that skill any more either.
Please keep the videos coming. I get great enjoyment watching a true craftsman at work.
I love your comment to those complaining you having success. I’m a big fan (situated in Denmark) of your channel. I want all the best for you and your family 😊
Thank you a very informative video I do similar work and I can understand your difficulties that can face all the people that compliment are the people that keeps watching your video clips keep it up
Beautiful work
Very sad that some User don't understand that your Success is result of hard work... Please keep on what U are doing because I'm a very happy customer enjoying your products and videos! THANK YOU
you care for your users, thats good to know...love you from Pakistan....always love your views and work..
Why would anybody be mad that YOU advertise YOUR business on YOUR channel?! Absurd. Keep doing what you’re doing, I love your videos and I go into your videos expecting to hear you plug your business. That’s exactly what one should expect from basically a how-to video. Keep it up Alex, love your content!!!
other videos tend to bother you with sponsors that have nothing to do with the content of the video.. granted, they are easier to skip, but still.
عراسي والله...معلم وشغلك نضيف عالآخر( طبعا بفهم لغتك الانجليزية لانها واضحة وسهلة)...انا من حمص ومتابع كل فيديوهاتك ...وبشتغل بصيانة الشاشات والراوترات والانفرترات...شكرا لفيديوهاتك الرائعة وفقك الله ورعاك...