My Custom DJI RS3 Gimbal Build (Battery Belt LIGHT AND PORTABLE)
Вставка
- Опубліковано 6 вер 2024
- 🔴DJI RS3 Pro Gimbal amzn.to/49WOs82
➜Digitalfoto Powerbase with Nato bhpho.to/3MWehv0
➜Dual Handles amzn.to/3V85r39
➜Battery (Provides Dtap power) amzn.to/3T4KinR
➜Belt Clip for Battery amzn.to/3P6ZdNd
➜Short Plate for RS3 (to connect monitor) amzn.to/3P78oNy
➜Friction Arm (to connect monitor) amzn.to/48Ih0Bg
➜Monitor amzn.to/3PJuRQo
➜Swivel Tilt Mount for Monitor amzn.to/3F6Vsls
➜Dtap Cable for Monitor amzn.to/3LLofQq
➜Thin HDMI Cable amzn.to/3J1klRZ
➜Dtap Splitter (to power other accessories) amzn.to/3tyYex7
➜Camera Plate to shoot VERTICAL amzn.to/3xu3NPr
👉SUBSCRIBE FOR OVER 150 FILMMAKING TUTORIALS: ua-cam.com/users/al...
My Custom DJI RS3 Gimbal Build (Battery Belt LIGHT AND PORTABLE) - In this video Will shows you all the parts he used to build out his custom DJI RS3 Pro gimbal. A few months back Will worked with DigitalFoto to create an updated version to their power base and now the latest version has a NATO clamp and works with the RS3.
🔴GET 50% OFF OUR PRODUCTS:
➜ alliandwill.co...
🎵MUSIC & SOUND FX WE USE IN OUR VIDEOS🎵
➜ share.epidemic...
👊 GEAR/ PRODUCTS WE USE & RECOMMEND 👍:
➜Our Main Camera amzn.to/2T9yGkR
➜Best Photo/Video Hybrid Camera amzn.to/3Z60qr1
➜Best SD Cards amzn.to/3EIp7kW
➜Additional Camera Batteries amzn.to/2SBLVdG
➜Vlog Lens amzn.to/3d7mKZX
➜All Purpose Lens amzn.to/30AFsV1
➜85mm Prime Lens amzn.to/2F5rPFE
➜24mm Prime Lens amzn.to/3mgSiFm
➜INSANE Macro Lens amzn.to/3iCTlIq
➜Best Camera Gimbal amzn.to/3RP0jLQ
➜Best Action & 360 Camera amzn.to/3EDACKH
➜Wireless Lav Mics amzn.to/3KMfyFB
➜200w Film Light We Use amzn.to/3INMgmP
➜60w Film Light We Use amzn.to/3ZPn3zo
➜Best Small RGB Light amzn.to/3Y6zG8v
➜Softbox For Lights amzn.to/31TIl6Y
➜Daylight Viewable Camera Monitor amzn.to/3SDXPSS
➜Best Drone amzn.to/3xUrpKe
➜Vlogging Tripod amzn.to/2XMYS9V
➜Travel Tripod amzn.to/2JSA7PQ
➜Best On-Camera Vlog Mic amzn.to/2Cq3UN0
➜Wind Screen For Vlog Mic amzn.to/2P5dBoN
➜Small Gear Backpack amzn.to/3Zu0rVB
➜Pro Gear Travel Backpack amzn.to/3DzE19U
➜Editing Headphones amzn.to/3rTmoQq
➜Best Budget Hard Drive amzn.to/3Ow6gMY
➜Best portable SSD Drive (FAST) amzn.to/3xZIra2
➜Budget Friendly Camera & Lens amzn.to/3Z7THwy
➜Budget Friendly Lav Mic amzn.to/31LIUur
➜Budget Friendly Lighting Kit amzn.to/2UZjvdE
➜Best Smart Phone 3-Axis Gimbal amzn.to/3kArIXm
➜Our On-Set Audio Recorder amzn.to/41x596x
➜Podcast & Voice Over Microphone amzn.to/3Su3Xf4
➜Audio Interface For Voice Over Mic amzn.to/3mgSYdS
➜Wills Electric Stand-Up Desk amzn.to/2HWtxt5
➜Best Video Editing Monitor amzn.to/3Sfz6TI
➜Best treadmill for sit/stand desk amzn.to/3FPVpuV
🔴GET OUR PACK OF 18 CUSTOM COLOR GRADING LUTS:
➜alliandwill.co...
🔴GET OUR PREMIERE PRO .MOGRTS PACK (35+ TEMPLATES):
➜alliandwill.co...
🔴GET OUR BUSINESS SUCCESS TOOLKIT (150+ Page E-BOOK):
➜alliandwill.co...
👉 VIDEO EDITING SOFTWARE WE USE (PC or Mac)
➜ adobe.prf.hn/c...
👉BEST TOOL TO GROW YOUR UA-cam CHANNEL:
➜ bit.ly/3g7DDpC
____________________________________________________
➜OUR PLAYLISTS:
🎬Our Full How-To Playlist ➜ • 10 CAMERA HACKS IN 2 M...
🎬Premiere Pro Tutorials Playlist ➜ • Premiere Pro Tutorials
🎬After Effects Tutorials Playlist ➜ • After Effects Tutorials
🎬Vlog Season 2 Playlist ➜ • Vlog Season 2
🎬Vlog Season 1 Playlist ➜ • Vlog Season 1
👉 Visit alliandwill.com for courses, blog posts, and other filmmaking resources!
#djirs3pro #djirs3 #customgimbal
--
Disclosure & Thank you for supporting this channel!
Some of the links above are affiliate links (If you decide to buy via one of the links, we may earn a small commission at no additional cost to you, which goes toward the growth of this channel.) New videos released weekly, so thank you for the support! - Alli and Will
🔴PRODUCTS USED FOR MY GIMBAL BUILD:
➜DJI RS3 Pro Gimbal bhpho.to/3MWUICZ
➜Digitalfoto Powerbase with Nato bhpho.to/3MWehv0
➜Dual Handles bhpho.to/3qxGctQ
➜Battery (Provides Dtap power) bhpho.to/43GfHR8
➜Belt Clip for Battery bhpho.to/3NmZ5Zy
➜Short Plate for RS3 (Used to connect monitor) bhpho.to/43TdoKy
➜Friction Arm (Used to connect monitor) bhpho.to/3qELGTu
➜Monitor amzn.to/3PJuRQo
➜Swivel Tilt Mount for Monitor amzn.to/3F6Vsls
➜Dtap Cable for Monitor amzn.to/3LLofQq
➜Thin HDMI Cable amzn.to/3J1klRZ
➜Dtap Splitter (to power other accessories) amzn.to/3tyYex7
➜Camera Plate to shoot VERTICAL amzn.to/3xu3NPr
I’ve been a photographer for about 20 years and am taking my very first baby steps into video. I have my rsc2 and was overwhelmed with all of the options for how to customize it. This video was perfect, especially the belt mount. Also, very devious getting your adorable daughter to convince me to subscribe, the knock knock joke sealed the deal. 😁👍🏻👍🏻
haha happy the video was helpful, and appreciate you're kind words!
Hello, great video! I would like to ask if you could take a close-up photo of mounting the monitor on the gimbal
Check out my ‘breakdown’ video for this gimbal build!
finally !!! i found the right setup, ive been trying to tfind a mount that can put the monitor at the back of the camera , thank you Alli and Will!!
No prob! Glad you found the setup helpful!!
Thanks for sharing! I would like you to please put the link on how you mounted the monitor, you forgot to put it in the description of the video. Thanks again
The links mentioned are for the specific pieces that make up my entire rig (including the monitor parts which are linked)
Thanks, Will! Can't stop watching your video🔥🔥👍👍 And your daughter is so sweet🥰
It was great collaborating with your team!! Thanks for making a great product! 🙌
This is absolutely incredible. Thanks for the content. I clicked the link, but I couldn't find one for the RS4. Is it available?
You're welcome! Glad it was helpful - I only partnered with them for the RS3, and since I don't own the RS4, I don't know if the RS3 version works on it, but if the battery grip is the same size, then it should work. My opinion is to save money and go with the RS3 though because it's almost identical. The RS4 has only minor upgrades
@@AlliandWill Understood. Thanks! Keep up the good work.
Do you think SmallRig Wireless Control Dual Handgrip will also work for this setup?
Yes, but it would add more weight I believe, which is why I chose to offset as much weight as possible to the belt and go with the regular handles
Dope! Getting that monitor on the rs3 is crazy
Thanks! It was tricky! Haha took about 7 different attempts in different spots
pretty cool you customized this the way an actual videographer needs a gimbal to be
Thank you!!
Pretty clever with the batteries! It might be a game changer for me. Great video
Appreciate the comment, thanks! Hope it’s a useful setup for you!!
Has anyone found a way to do this but vertically mounted?
Yes, of course! Use this cheap vertical plate: amzn.to/3xu3NPr
Impressive! I don't think this was asked in the comments, but what is your guesstimate hours of use with your 98w battery pack powering both the stabilizer and monitor?
To be honest, I don't know because I've never needed to swap to the second battery I own! I used 1 battery for the entire shoot outside which was several hours, and I've also used it multiple times for commercial/corporate shoots without needing to switch. That being said, during those shoots there was down time when I had the gimbal turned off.
If I had to guess, I'd say somewhere around 5-8 hours of continuous use, which should be enough for 99% of shoots because of down time, but I could be way off, which is why I own a second battery, just in case!
It's become somewhat of a luxury to me that I don't need to change batteries on the monitor or gimbal and that I can just trust it's always good. I've been thinking about connecting my DTap splitter and running a dummy battery to the camera, or USB-C so I don't need to change the camera battery as well.
@@AlliandWill this is good insight! I do a few all day camps, so I’d have some down time here and there. Thank you for replying so quickly!
I wonder - would this also work with the new RS4 (non-pro)?
I’m not sure! I don’t own the RS4, and I only have experience with the RS3 Pro, but if the battery mount at the bottom uses the same battery grip as the RS3 Pro, then it should work. That being said, the RS4 Pro isn’t really that big of an upgrade. It’s bigger, which is not ideal for my needs, and has an easy way to switch the camera to vertical, which also isn’t needed for my needs. Other than that, it has slightly better motor torque, but the RS3 motors are more than enough for the Sony A7siii, a heavy lens and some accessories.
I won’t be upgrading for those reasons. My opinion is it would be better to save money and buy the RS3 Pro at this point 👍
Would the “DigitalFoto Powerbase with NATO” be compatible with the RS4 Pro?
I haven’t tested it as I don’t own the RS4 Pro but if the battery grip is the same then it should!
I'm searching that kind of Setting for the Ronin SC - do you know if there is something on the market? ( Power Supply Baseplate)
I don’t think it exists, unfortunately
What are you using to power your camera? I'm on a blackmagic pocket 4k, and the battery life is garbage. I don't think my RS3 can accommodate an external batter, though?
I’m using the normal battery in the camera but with my setup you could use the dtap splitter cable (I think I have it linked), and then go from dtap to dummy battery for your camera 👍
Emilia is adorable ❤️
🥰🥰 thanks for watching!!
Smart guy! Incredible build, great job.
Appreciate the kind words, thanks for watching!!
I have the rs4 not the pro will i be able to use this set up as far as weight goes??
I’m not sure! I’ve only used the ‘pro’ versions. If the handle power grip is the same size, then it probably would work!
How did you mount the monitor on the camera quick-release plate?
Answered below in comments or in my ‘Breakdown’ video 👍
I'd like you to make a video where you can go in detail about this setup and how to build it!
That video is out now on our channel :)
Fantastic footage!! Gimbal and skateboard make the smoothest video!
No doubt!! Thanks Dustin!
I recently picked up the same base plate. Did you have any trouble with the lock switch not engaging when attaching the Digitalfoto base?
You might have an earlier version! The original version didn’t connect well. That being said, if it’s slightly off, add a couple small pieces of gaffer tape to make the connection better 👍
@@AlliandWill Thanks Yeah I sent an email to them with a video so we'll see what they say!
5Nice video! I would like to know if there is a possibility of powering the RS3 externally. I know that Power Supply Baseplate with D-Tap & NATO Mount is only available for the Ronin RS3 Pro. Do you think it would be good for the RS3 as well?
Thanks! I’ve only tested it with the RS3 Pro, not sure if it works with the RS3, but maybe in the description for the product it clarifies?
@@AlliandWill thank you very much!
Amazing setup! I'd like to customise my RS3 Pro setup, with the priority of having the monitor in the center of the build. Would you be so kind to specify how you connected the magic arm with the monitor mount? I feel like there is another piece of equipment in between those two, which connects them. Thanks!
Thanks! That’s been a popular request, so I have a video on that coming out soon!
Great build and never thought about taking the weight off my shoulders and back with the belt clip. You seem to have used a longer D-Tap to Powerbase cable and don't see that listed, can you provide a link? Thanks
Thanks! No it’s the same one that comes with the Powerbase. Its around 3 feet long and is a dtap to 2pin cable
Love the setup, thanks for sharing!
No prob, appreciate the comment!!
What is the cable called from the battery to the gimbal?
It comes with the power base. Dtap to 2pin
How about using Tilta "Dual Handle Power Supply Bracket for DJI Ronin"? I think it's almost same but also we can use battery grip itselft.
It definitely is an option, but that means you have the battery weight on the gimbal still. With my setup you have no battery weight on the gimbal which means longer shooting and less back pain! So for that reason, I decided against those handles.
Is this the regular RS3 or the RS3 pro ? I’m leaning on getting the RS3 and definitely want to go your route you went here
It's the RS3 Pro. For paid professional work or if you're doing video work seriously, I'd suggest the Pro version. More features, can handle larger cameras, suited more for pros. I have a link in the description for the pro version from Amazon 👍
just wondering if this will work with RS 3 not the pro?
Not sure as I don’t know the normal version. But it might! I’d suggest checking the description of the power base to see if they clarify!
what is that black rubber thing at the back of your gimbal. below the motor at the back side. mine doesn't have one.
Do you have the RS3 Pro? Or just the RS3?
@@AlliandWillRS3 only. Not the Pro.
The pro version has some higher end features like those rubber bands 👍
I bought the power base but it’s loose? I bought the one from the link, it falls when I try to film
Hey, you can fix it really easily with a small piece of tape. I’ve answered this before in the comments, but basically, on one side of the power base, where it connects, add a small piece of tape (like 1/4” by half inch), like gaffers tape or duct tape, you may need a second layer, but that will allow it to lock. Most don’t need it, but the manufacturing seems to be off on some units. If you need further instruction, DigitalFoto put up a short video on their site as well I believe.
Hope that helps!
@@AlliandWill thank you! ( I put tape around the entire base lol 😭 )
@Slipmindtexan haha I guess that would work too, but not as clean 😂
With this setup can you mount the monitor anywhere else but behind the camera? I like this setup but I’d like to have another option as well
Technically you can mount the monitor somewhere else, but I would HIGHLY suggest keeping it where I have it as I’ve tried so many other options and this is the only one that felt right and has the most use cases
top ,👍
Thanks!
Nice rig there. Your link to the external monitor seems to change, can you give an exact monitor link, make and model? Is there a video for the exact 'How to' of your connecting this monitor-camera-gimbal setup? 🤔
Thanks! The monitor was discontinued, unfortunately, so I provided an updated 'second best' option in the links. I have an updated 'breakdown' video on how I connected the monitor, but basically, if you buy all the pieces I linked for it (Plate, magic arm and the swivel piece), it will allow you to connect it all from the back of the new plate. (Check some of the other comments here as well for context as I've helped a couple others as well)
GENIUS!!! THANK YOU!!!
You’re welcome!
Can I also get power from the gimbal usb c to power the camera or another accessory?
Possibly! You can get a dtap splitter as well (link in description) and supply power that way
What cable is that to connect to the nato battery?
All links are in the description. The cable that connects to the battery comes with the DigitalFoto power base 👍
How do you focus the subjects? What techniques are you using while using two handles
The same focus techniques that have been used for many decades on professional large productions, as well as modern techniques!
Parallaxing around the subject without moving closer, starting out of focus and moving into focus, having another assistant on set pull focus with a wireless follow focus system (I have a review video coming up for that soon), or leveraging the incredibly good auto focus systems built into the camera that has eye tracking and subject tracking.
Nice rig build and a great overall video. It doesn't look like Digitalfoto ever actually built or produced a power base model for the RS3 Pro or is it a custom request only? Thanks!
Thanks! Yes they did, I linked it! It's the one I made in collab with them, but it is somewhat popular, so it might be on back order. I included the link
Regarding the monitor connection; how does a cold shoe mount onto a 1/4” thread screw?
The amazon links for the swivel mount & the magic arm shouldn’t be compatible, is there something missing?
They are compatible because the swivel has a 1/4" thread at the bottom :)
got it, thank you 🙏🏼
Horsey on your head! Just kidding! So cute and awesome gimbal build
😂😂
nice setup! i’ve been following along all the details you have here. Where did you get the long cable dtap to power the digitalfoto powerbase? or is the powerbase comes along with that long cable?
Thanks! The DigitalFoto power base comes with the cable!
Man do they have the RS4 Pro version?
I’m not 100% sure. If the battery grip is the same, it will work. That being said; I would still buy the RS3 as the RS4 is basically identical with only minor improvements. So better to save some money and go with the RS3 Pro
@@AlliandWill I Own the RS4 Pro So I might. So im might just buy it and hopefully it will work lol
@@directed_by_steve lol let me know if it works! If it it's a little loose for locking, just add a small piece of tape or two to one side. Hopefully it works!
Excellent!!! And, thanks for sharing. One note, the link to the monitor isn't working, can you provide which monitor you are using?
No prob. I updated the monitor link and monitor power supply cable link 👍 (the monitor I purchased a little while back has now been discontinued). The link I added is a similar monitor (slightly better actually). Thanks for watching!
So helpful... thx you 👍
No prob!
Would be amazing if it had 2x d-tap out for dummy battery and monitor
In the video i mention a dtap splitter, which I believe ive linked in the description; that will do what you need :)
@@AlliandWill I've seen that. It's just not as elegant a solution as having it natively
@@SoundAndAmbience That's unfortunately the reality to custom builds! Hope the rest of the build ideas work for you!
@AlliandWill that's true! Don't think you said in the video, how many amps is the V mount you are using?
I was wondering if a 6 amp would power monitor the camera and gimble
I don’t recall off the top of my head, but If you click the link for the battery in the description, it’ll bring you to the product where it has the details :)
Very cool. Looks like it's about $2100 for the whole build?
The monitor is a long term investment, and so are the vmount batteries plus some of the cables, making the actual investment over the long term less as the monitor/batteries/cables can be used for other setups.
Not including the gimbal and monitor, the setup is probably under $750
Maybe $2000-2500 including gimbal and monitor. Sooo much cheaper than my previous gimbal which was like $7k 😅
What hdmi cable did you use to this setup?
The hdmi cable is linked in the description!
The one that started to some is from Tilta?
To smoke? No, it wasn’t Tilta; it was smallrig, but it’s possible my units were just defective. We actually use Smallrig quite a lot with other accessories and like the brand, but found DigitalFoto’s power base to be best.
@@AlliandWill I see, I was looking at Tilta just because it's the only one in stock right now :D Thank you for the answer!
Great idea! But how do you start and stop recording?
Thanks! I’ve assigned the shutter button on the camera to start/stop recording; easy to press when needed.
@@AlliandWill I see! So there is no control on the handgrips?
@BrunoCostaMusicChannel nope, it would make the setup heavier, but I believe there is a handgrip sold that can be used the way you want. Someone else in the comments mentioned it, but I prefer my setup. Weight is my biggest concern after 9 years of shooting with gimbals lol
Impressive build! Any idea where to purchase the long 100cm cable (Powerbase to Dtap) separately?
Thanks! I’m not sure where to get the individual cable, sorry!
Great rig. How exactly is the monitor mounted?
Thanks! It shows how it's mounted in the video and I briefly mention it toward the end :) I've also included links in the description for the specific parts. It's basically a magic arm connected to a new camera plate I found that has a 1/4 threaded mounting spot on the back.
@AlliandWill thanks. Yeah I have that same plate. Will try it today. Appreciate it
Thanks Good Information
No prob!
Does this also work for regular rs3 ?
I’m not sure! It says for RS3 Pro on the product, but if it’s the same size it might!
Great build Will! Curious, in the video at 7:26, I get that you used the Manfrotto plate that has the 1/4" 20 female thread on the underside rear of the plate. I get that you used the little SmallRig friction arm, the 1/4" 20 male into the plate. But to attach the other end, which is 1/4" 20 male to your Small HD monitor mount with tilt, doesn't the end of the Small Rig arm have 1/4" 20 male and don't the monitor mounts also usually have a 1/4" 20 male also? How did you get rid of one of the male connectors and replaced it with a 1/4" 20 female?
I have several SmallRig and other brand monitor mounts and none them have 1/4" 20 female taps on the bottom, I'm stumped how you attached? Can you clarify?
Thanks for watching and commenting. For sure; There’s a swivel adapter product that was released within the last couple years by small rig (others have it too), which allows you to connect it to the bottom of the monitor and to the end of the friction arm. It came with my monitor, but you can buy it by itself too. I’ll make a note to update that part in the links for the exact one I’m using in the next day or two. (I also used lock washers on both sides of the friction arm so that it wouldn’t get loose.)
@@AlliandWill Thanks Will, that’s very helpful!
@@danbrockettDOP Here ya go: amzn.to/3F6Vsls
@@AlliandWill Thanks Will! Very handy that that mount has a 1/4" 20 tap with the cold shoe! Ordered.
@danbrockettDOP no problem! Glad it will help you!
also what exact small hd were you using? Thanks
I replied to your other comment, but I’ll copy and paste it here too. It’s the Action 5 monitor; It’s 5” they actually just discontinued the monitor because people were complaining about it, which I don’t understand. It was 1/5th the price of their other monitors. It works great, but just has limited features. Perfect for gimbals. Too bad they don’t make ‘em anymore. Best alternative is what I have linked now in the description and pinned comment.
@@AlliandWill I want to pull the trigger on this setup. Thanks
It’s a beast! Happy the video helped you!
His videos are always very informative. I would like to know if there is another way to power the DJI Ronin with v-log battery, without buying the DigitalFoto Solution Limited Power Supply Baseplate with D-Tap & NATO Mount for DJI RS 2/3/RS 3 Pro? Thank you
Unfortunately, you're pretty limited with options. The point of this video was to show that you don't need to use the original battery grip. I used the best option available to create a smaller, lighter rig. My recommendation stays with the powerbase I showed, it's great
Interesting setup, was just reading the reviews on the powerbase, it seems the slack and wiggle is still there. A buyer made a review 2 month ago and says there is still a gap, while you say it is "fixed"? hmmm
The initial wiggle was massive, to the point that it would not lock. The current version might be off on some of them, but it is incredibly easy to fix with a piece of duct tape if you feel that yours doesn't lock as tightly as you'd like. Mine was fine, most are, but sometimes imperfections happen during manufacturing. Again, a small piece or two of duct tape on one of the sides will completely solve the problem.
@@AlliandWill exactly what I was thinking, small added padding
@@AlliandWill to add.. found a video of them showing how to connect it. Pressing the lock button on the gimbal. They posted it a month ago it seems. This would lock it tight
😊👏👏
Thanks for watching!
Hell ya
💪💪
I don't think having batteries on you and a cable attached outweighs the length of the DJI battery. It's not that long without the tripod on the bottom and at least you have another handle to grab if you need it. You're not really gaining anything at all in my opinion.
I disagree. I’ve shot commercial content for big brands for the last 12+ years and have rented/used numerous gimbal combinations and have owned numerous gimbals over the last 8 years. Without a doubt, off setting the weight, and making the unit smaller provides significantly longer shooting times and options for fitting the gimbal in smaller places. The gimbal in this configuration is like 5” shorter and weighs less too. I recently shot a project for KFC with this exact build and it was sooo much better. I could shoot longer takes before getting tired and I was able to do creative shots close up over a table dressed up with food products
@@AlliandWill Not sure if you have seen the Tilta dual handle support that includes one grip. It looks like you use the original DJI grip on the other side. Both handle power the gimbal and it does away with the cable. Both handles have controls on them. Also the handles are pointing up instead of down which makes it even more compact and I'd imagine the weight would be better distributed.
It looks amazing.
That means the battery weight is on the gimbal. In my setup there are no gimbal or monitor batteries on the gimbal, so it’s definitely lighter which means longer takes. If you prefer that setup, go for it, but I’ve used full cage Freefly M15 gimbals with cinema cameras, full ring gimbal setups, single handle Rs1 gimbals, M5 gimbals and out of every setup, I prefer the one I made (which is based on using all the setups and choosing which elements make the most sense for shooting commercial content as well as run and gun stuff like the clips I shot for fun in the video. I can also turn the handles upright if I want, I just prefer them down. I find I can operate smoother parallaxing shots that way. Thanks for the discussion!