I did this same exact Rough Country 4 inch kit on my 2019 1500 Classic and it cleared and looks fine with 35/12.5-20 Nitto Recon Grapplers on 20x10 rims. Just the right amount of lift to get into my seven foot garage doors.
Do you have to drop the front diff and cut the factory bracket like they show in the rough country video? Really would rather not do all that especially in my driveway.
On a 4 inch lift do you need rear control arm relocation brackets and pan hard relocation bracket cause I saw on the BDS 4 inch lift they have that included in the kit
I want to get the 4 inch rough country lift for my 2018 ram but that was the one thing I was worried about I don’t won’t the geometry on the rear to be off
Can you take a lift off and put a bigger one on. For instance taking off a 6 inch rough country suspension lift and putting on a 8 inch BDS suspension lift
I bought a 2014 ram 1500 4wd it came with a lift already on it i do not know if its 4in or 6in lift. How can i tell the easiest way. I am running 35x12.5x20s
Check our gallery out to see what others are getting to fit here - www.customwheeloffset.com/wheel-offset-gallery?make=Ram&model=1500&suspension=Suspension%20Lift%204q&sort=date
How much overall lift does the truck get? I.E. if your truck is 78" in overall height and you put on a 4" lift does that actually mean your overall truck height is 82"?
@@CustomOffsetsTV ok thx for the reply. I have roughly 5.5" to work with and I know 35's will net me about 1-1.5" in lift over my stock 33's depending on true measurement of the tire. That leaves me with roughly 4-4.5" to put into the overall lift height of the truck. I assume if I only "level" the truck with the rear I'm not actually changing the overall height. However if I add in spacers or springs say 1-2" in the rear then that is the actual overall height change?
a leveling kit will bring the front up, if you have clearance lights for example, it will put them above roof line instead of inline with rear of roof.
Funny how I’d been looking for a video on this lift before I did it then the week after I bit the bullet and did it they post one Btw I’m running 22x12 on 35/12.5 with plenty of clearance could fit 37 or 14 wides
whats the offset and back space with your wheels. I just ordered the DaVincis today in 22x12 -51. I have a 4" BDS and am a little worried I will have to do a lot of trimming with 35s.
You guys should definitely do a video going over the best ways to prevent and repair rust issues. I feel that video will do very well.
That would be somethin more so for a body shop man!
I did this same exact Rough Country 4 inch kit on my 2019 1500 Classic and it cleared and looks fine with 35/12.5-20 Nitto Recon Grapplers on 20x10 rims. Just the right amount of lift to get into my seven foot garage doors.
Does it matter for a v6 or v8?
Would love a what fits 11 to 16 ford powerstroke video
Does the driveshaft need to be modified with the 4 inch lift?
Do you have to drop the front diff and cut the factory bracket like they show in the rough country video? Really would rather not do all that especially in my driveway.
That’s what I need to know
@buckshot1123 can you send me the video your referring to
Does the cutting need to be done and drop the diff
On a 4 inch lift do you need rear control arm relocation brackets and pan hard relocation bracket cause I saw on the BDS 4 inch lift they have that included in the kit
I want to get the 4 inch rough country lift for my 2018 ram but that was the one thing I was worried about I don’t won’t the geometry on the rear to be off
Can you take a lift off and put a bigger one on. For instance taking off a 6 inch rough country suspension lift and putting on a 8 inch BDS suspension lift
Yes you can lots of people have!
@@CustomOffsetsTV do you have any idea what something like that would cost to do?
Is this on a 2nd Ram?
Would you recommend adding extended sway bar end links with a 6 in lift and why?
Comes with everything needed to complete lift install including sway bar extensions or extended swaybar perches
Day 59 of asking for the top 5 dually wheels
Bruh we have waited long enough i need this
@@CoolD10 👍🏼
Could you make a video about 3rd Gen Tacomas for lifts/Level kits really don’t know what I should go for
So do you have to extend the brake lines or that’s just a choice? New to this and was looking at this exact kit for my ram 1500.
Hey guys I'm from Silver Spring 20903 MD you guys have shop to do this custom life kit work on my truck...
Next part of the Ford build off??
I bought a 2014 ram 1500 4wd it came with a lift already on it i do not know if its 4in or 6in lift. How can i tell the easiest way. I am running 35x12.5x20s
You can measure it.
Hows the ride on pavement with the pre loaded coil overs
Amazing. A super nice ride especially for the money!
Where did you get the (flag) grill from???
Biggs! Finish your build!
what size of wheels and tires fit on this setup
I can fit 22x12s on 35/12.5 I think you could fit 12 wides/37 or 14wides/35s
@@tylerbirdwell5476 Thank you
Hey, currently I'm running 35x20x12.5 Toyo open country Mt tires. No rubbing or trimming was needed.
Check our gallery out to see what others are getting to fit here - www.customwheeloffset.com/wheel-offset-gallery?make=Ram&model=1500&suspension=Suspension%20Lift%204q&sort=date
@@bryaschmit3872 just got a 2015 Ram, I want to do a 4” lift with 35s but wasn’t sure if I would need anything trimmed or not
How much overall lift does the truck get? I.E. if your truck is 78" in overall height and you put on a 4" lift does that actually mean your overall truck height is 82"?
It would gain about 2” total. It’ll level the front end lift it. The front will move 4” the rear would be around 2 for that example
@@CustomOffsetsTV ok thx for the reply. I have roughly 5.5" to work with and I know 35's will net me about 1-1.5" in lift over my stock 33's depending on true measurement of the tire. That leaves me with roughly 4-4.5" to put into the overall lift height of the truck.
I assume if I only "level" the truck with the rear I'm not actually changing the overall height. However if I add in spacers or springs say 1-2" in the rear then that is the actual overall height change?
a leveling kit will bring the front up, if you have clearance lights for example, it will put them above roof line instead of inline with rear of roof.
Funny how I’d been looking for a video on this lift before I did it then the week after I bit the bullet and did it they post one
Btw I’m running 22x12 on 35/12.5 with plenty of clearance could fit 37 or 14 wides
What year is your truck?
@@illballa20 2017
If you haven’t figured it out yet I’ll tell you what they always say, look at the gallery on their website. You can find whatever you need there.
whats the offset and back space with your wheels. I just ordered the DaVincis today in 22x12 -51. I have a 4" BDS and am a little worried I will have to do a lot of trimming with 35s.
What offset do you have on your wheels?
Perfect👍👍
I’m trying to convince my dad to get them
Day 31 asking for a top budget wheels
Day 25 of asking custom offsets to rate your square body Chevy’s
Day 57 of asking CO to rate our jeeps
+1000 for Milwaukee Tools
second
First