MONSTALINER Bed Liner - Dodge Ram
Вставка
- Опубліковано 5 вер 2018
- This weekend, I applied the MONSTALINER Roll-On Truck Bed & Utility Liner. It was fairly easy, just time consuming. The sanding is a necessary step but seems to go on forever. I used the scratch pad the kit came with and also some 220 grit sandpaper. 120-180 grit is recommended but only had 220 in my toolbox so I had to scratch the paint a little more. Dry time is dependant on humidity and temperature. The higher the humidity, the shorter the dry time. I live in the high desert of NV and the day I rolled on the paint it was less than 10% humidity but since it was warm out, my dry time was only about 3 hours. When totally dry, the bed liner did not keep the rubberized feel. It is a textured hard surface. Still really happy with it.
- Авто та транспорт
Somebody on UA-cam following the manufacturer's directions? What is this, the Twilight Zone?
Nice job.
Excellent video; you did a beautiful job.
Finally! A great video about bed liner coatings that isn’t full of tough guy music and useless babble. Thanks for taking the time and putting together a very helpful video. Line-X quoted me $2800 for the work I want to do on my van, now will save plenty of $$ due to your video.
OldDocThedan that’s great glad you found it useful
I use roll on bed liner on my own truck two years ago and it's still perfect
Thank you for doing this video
Where you had to squish the roller into the corners, another youtuber said that causes the roller to break up quicker, and to use the brush in those locations where a roller not being squished will miss. He also said to buy three times the amount of rollers that that the company recommends or you may miss the chunks and be finding them in the liner for years to come.
I haven’t used the product yet, but it is within my plans for a couple vehicles I’m working on...
Good vid.
Rick Sanchez C137 thanks, great advise. Yep take note on the things I did wrong so yours will come out better. If I get another truck in the future I will definitely use this product again.
To be honest with you from the beginning I really wanted to hate all over this but after seeing the end results I can’t help but to really like it, i’m in a neighborhood where I can’t spray because that’s really what I wanted to do was do the spray version but this is what I have to do so I’m gonna stick with this on my 2013 Dodge ram tradesmen 1500 thank for posting man
Good video thanks
How long is the working time after you add the catalyst?
I saw a car for sale that advertised they sprayed whole car, crown Victoria, with monstaliner. What do you think??
The kid humming is great music
How is it after 2 years? Do you have update video? Thank you
How has it held up so far?
Where can i get that product? i really like that finish , looks real thick !! Thanks for the video!!
hey Jack , great vid , i have a 99 Cherokee XJ , clear coat is coming off and paint is fading , would you recomend using this on the body , i do a lot of off roading and looking for a better look than i have now but durable enough for bush whacking also
You can try it! I had a friend who did his in black and had no problems.
Thanks for video! What does it looks like after a year?
johnjpa808 pretty much the same. It hasn’t faded any, but I did drag my Jeep axle housing across a small section and it dug a 2” strip to bare metal
How has this held up with throwing stuff in the back? Looks great and I'm considering it for my 2018 GMC Canyon
Jake L so I threw a bunch of stuff in the back a few weekends ago to take to the dump. After I took all the stuff out the liner looked terrible I thought it was scratched up white but it wasn’t. I washed it out with the hose and it went back to normal. It doesn’t rain here but every 3 to 4 months so it will never get wet here. I love it still looks new.
@@JackGriffithsgarage this is surprisingly hard to find an answer on. Every bed liner review I find is about using it as paint on panels, not in bed. Thanks!
Jake L I loaded up a Dana 44 in the back and it dug into the coating and now will need a patch. It’s a small scratch but 3” long, Besides that it still looks great.
Did you use the whole gallon or did you have some left
Julio Gonzalez I did not have any left.
Okay a year later, how has it stood up to the weather, abuse, etc.? Otherwise it did go on nicely.
Mean Mr Mustard it’s held up well. A few weeks ago I put the Dana 30 I bought off craigslist in the back and I pushed it in and it tore it to the metal. Besides that the color still looks great. I also spilled all the gear oil in it and it cleaned up easy.
And today it is sept 28. Has it held up over the past 2 years?
CS Watson it has held up well over the last two years, very happy with it. Definitely has its pros and cons but you can’t beat the color match and how it’s held up to the abuse I’ve given it.
Thanks for sharing this video! I have a Ram 1500 and an 01 Dakota both the same color as your's. I have already done the Ram in black bedliner and your video was very helpful in choosing the color for my Dakota's bed. I am also planning to do the rocker panels / bumpers but I may do those in black instead of the midnight special like the bed. Great video from start to finish. Almost forgot, there are bed mats that you an buy, thick rubber bed mats, I work at a refinery and often haul valves that weigh in excess of 70lbs each. The bed mat helps is keeping the bottom of the bed from getting totally damaged. How is it holding up for you?
asianphoenix the liner is holding up well. A bed liner would be a good idea! It makes white marks when you drag stuff across it but once it’s washed so far the marks go away. Thanks for you comments!
Is it ok to do it in winter ? Even if i will let it dry in my garage ill be driving it after a few hrs..will that be ok here in Canada with this winter or could the paint come off ??
Alessandro Terracciano the box said it did need to be a certain temperature which I think was not below 50 degrees. I wouldn’t do it if it was too cold. I actually got the kit as a Christmas present and waited till the summer
Jack Griffith's Garage k thanks
I did my bed a while ago and now I'm thinking to do the rear bumper, sides and front bumper with the grill
Update? How’s it holding up now?
Rodney Prak looks great trying to upload a pic but it wouldn’t let me. Still happy with it. We had a lot of snow this winter and no problem.
Stuck between this and herculiner but nice video...
J0NESY7MM Did you decide on either?
@@kullindouglas herculiner love it so far man
Herculiner is subpar in comparison watch project farm bedliner comparison
Seems like alot of work.
Paul Popp yep but I enjoy doing stuff like that!
What is the different between the roller and the brush which looks better
John Imperial roller
@@JackGriffithsgarage any kind of roller?
How is the temperature in the sun? Hotter or cooler than paint?
Not as hot
@@JackGriffithsgarage Thanks for the reply
Where can I buy this product? Thanks for the video.
John Turpin www.monstaliner.com/
John Turpin Great price too! And they will send you a sample kit so you can match up the color with your truck!
Looks like you need 4 kits for that truck.
How has the durability been
Great!
How long did it take you to this this exactly. Like each day you worked number of hours. I see you stated weekend. But was that 8 hours a day or ...??.
Use 60 grit and you get scratch up that bed in 10 minutes.
Instructions specifically say not to use rubbing alcohol
Dude, you can put an extension pole on the roller and you dont have to climb in the bed.......have you ever painted before??????
Nicely done video. In the future keep gloves on and don't have your kid running around. Some of those chemicals are pretty nasty. MEK is nothing to mess with. Read the MSD on that stuff. Also keep your safety glasses on when your mixing chemicals. Other than a few minor safety issues you made an excellent video.
Raptor liner is better