Tacoma Mods: How to add RAPTOR LIGHTS (2020 Toyota Tacoma TRD)
Вставка
- Опубліковано 24 сер 2024
- Full how to wire and install raptor lights on your tacoma. Applies to all 2016 to 2021 tacomas with the pro grill!
- Raptor Lights amzn.to/38cRzMA
💡MODS so far on the 2020
FULL Playlist - • 2020 Tacoma Build
- Rough Country Lift Kit w/ Lifted Struts and N3 Shock in Rear www.roughcount...
- Tri-Fold Gator Tonneau cover amzn.to/3bpvglB
- LED Interior bulbs amzn.to/2M4yyO1
- LED License Plate bulbs amzn.to/2M4yyO1
- Plasti dip amzn.to/2XA4NMD
- K&N Cold Air Intake amzn.to/2ZS7I5C
- K&N Recharge Kit amzn.to/3htcxZ6
- Tailgate Letters amzn.to/2WU9gdP
- Diode Dynamics Stealth Light Bar Kit 2016-2020 Tacoma's www.diodedynam...
- OEM Light Bar switch amzn.to/2BXWpiY
- Diode Dynamics DLR RGB Upgrade KIT - www.diodedynam...
- Diode Dynamics Halo KIT - www.diodedynam...
- Diode Dynamics Headlights www.diodedynam...
- TRD Pro Grill toyotaproshop....
- Depo Tail Lights amzn.to/2MCsIWr
- Tekonsha P3 amzn.to/3fQ7UqU
- Back up Lights: amzn.to/33Ts6UL
- 2016 to 2019 lights Bed Lights amzn.to/2Xbgf3z
- Raptor Lights amzn.to/38cRzMA
📲 SOCIAL MEDIA
Instagram: / djrickweb
Facebook: / djrickweb
Mixcloud: www.mixcloud.c...
Twitter: / djrickweb
📸VIDEO GEAR
-Cannon G7x mark 3 amzn.to/3aRKIqp
-GoPro Hero Plus amzn.to/2iO0RER
-DJI Phantom 3 amzn.to/2iGFlOJ
-Joby GorillaPod amzn.to/2jvlbM6
-Seagate 2tb Hardrive amzn.to/2tr6wTb
-Sasmung T3 hardrive amzn.to/2tWVKpM
-Edit Software: Cyberlink Powerdirector 14 on Windows
BIO
I was born August of 1995 in Ohio. I now live in North Carolina. I am a mechanical engineering for a tire company and I have been a professional open-format club / mobile DJ since 2012. I created this UA-cam channel for the purpose of sharing my experiences and knowledge as I tinker and mod my 2020 Toyota Tacoma TRD Off Road. If you have any questions don't hesitate to ask.
Great video. I ran my wires a little differently into the fuze box with the add a fuze in my vid.
Thank you for showing how to snake the wire through like that. It was killing me to have to pinch a wire. I was sitting there contemplating on cutting the box and going all crazy but your method is golden and save a lot of time
All as I can say is nothing better than a Taco Rick video. I look forward to each one. And I don't even have a gen 3 taco. I'm still on Gen 2.
Bro could you make a video explaining how to tap the DLR wire correctly please
just subscribed, i'm about to get my first Toyota this weekend, a tacoma a trd off-road 4x4 like yours.
Hey man i just bought my army green 2021, ive been watching your vlog since and its been helping me a lot!!!keep it up rick hopefully one day after this pandemic we can roll up with a bunch of tacoma owner here in Virginia since you stay at NC!!!
You can do this without splicing into the headlight wire by going to the headlight fuse. Don't mess with your warranty!
I added raptor lights. I found out the fuse in the box is for the DRL relay, not the DRL lamps themselves. If you want them to operate like your DRLs, you have to wire into the harness like he is doing.
I used lasfit LD series for my fogs. Looks good on the tacoma. White for pure dark nights, and amber for heavy fog, or rainy nights.
Nice hybrid fogs?
@@TacoRick ig you can say that. Their bright and works great. Everyone is always suprise how my fogs changes color.🤣 not as good as diode dynamics ss3. But they work great for stock
Thats funny! 😁I thought the same thing you did. Everyone else running 4 in the middle and I'm thinking it should be 3 at the top. . Like the raptor. . 🤔
Can you plz show how you exactly spliced into the DLR wire?
Love your videos man! we all appreciate your tutorial videos!
Badass toyota tacoma!!😉👍💯 love the lights as well...💯🤙
Nice job Rick.
Great video man!
Great video but thats not a Dremel it's a multi-tool hahaha keep up the good videos
Nice job 👍
Did you figure out yet that your raptor lights turn off when your blinkers turn on.
See the updated wire mess video I posted shortly after this
Have you run into any problems with this setup? I also want to run the lights with the DRLs. Also when you lock/unlock, do the light blink along with the headlights?
No problems other than those Amazon lights crapping out. Not sure if they blink
Pouvez-vous le traduire en français
Will these lights work in the factory grill on the 2020?
They sell a different kit ment to clip into the factory style non pro grill
Hello ! I have the same rough country lift on my 2019 tacoma , I was wondering when should i check the lift maintance ? also can you do a video how to check the bolts and on the lift, Sorry If I sound a little confusing. THank you :D
Its been a minute but it says in the instructions. 50 mile 500 miles and then every 5k if I remember right. I check every 5k now when I rotate tires
@@TacoRick thank you so much for replying!
So i just had a minor freakout after watching this video solely based on the fact that you said 6 clips to remove the grill instead of just 2 at the top. This is because I just installed new headlights from tacomabeast a few days ago and knew I didn't remove the four at the bottom like I did the last time when i swapped to the pro grill. So obviously I ran out to my truck and removed the grill again to see if I broke the 4 clips and found that they don't go into the grill portion whatsoever. I'm somewhat new to the taco scene as i bought a 19' last year. So this had me wondering if the oem pro grill or past/future year models did use these 4 clips? I have to ask because just about every taco youtuber says the same thing to remove the 4 at the bottom. Am I missing something?
The 4 bottom ones were there in my 2018 and my 2020 from the factory. Never could get the grill off without removing them
What is the actual purpose for raptor lights? They look cool, but outside of that, what is their purpose?
Just visual.
Mostly for aesthetics but Ford Raptors have them because they are very wide vehicles and they need them to be seen at night
would the lights be able to go into the middle row of the grille?
They can go in any row
My add a fuse kit came with a 25 in it. Can I still add the 10 to it?
Yeah. You can combine just about any size the big is to make sure you use the same as the one you are replacing in the bottom slot
Nice! Question, did you use a fuse when tapping into the orange DRL wire?
Yes I used the add a fuse
@@TacoRick Rick so the red wire on the raptor lights is the power wire - you tapped this red wire to the DRL orange wire for power and black to ground? I also want to run the raptor lights with the DRL not headlights.
Yes. But see my updated wiring video I posted 2 weeks ago
Does the adaptive cruise control still works on your 2020 Tacoma after changing the front grill?
Yep! Check the video out that i did on the pro grill swap. The sensor takes a little fine tunning to get it working just right but no issues since. 7 months later
@Taco Rick you think those lights would fit a 2021 tacoma off road with the original grill? Thanks
Which grill? They make ones for the honeycomb looking one.
@@TacoRick yeah, my Taco has the one that looks like a honeycomb, so I don't know if those raptor lights will fit into that grill.
They make ones specific to your grill. Check amazon
When you wire them into DRL are they on during night time when you’re running headlights only? Or are they only on when you’re running lights are on?
Check out the next video I made on this. The one going over wiring.
my 2020 tacoma didn’t come with a daylight amp runner does it make a difference if i just put the amp with the solo one i got then?
I am not sure
Any thoughts on the AUTO Headlight feature and having the raptor lights turn on automatically when the “auto headlights” is activated?
BOOM! Never mind. You address this in the “wiring mess” video. Genius! Thanks man!
See my updated wire video following this
You got it
Dude you can't have red lights in your drl's that's illegal red is for the rear only
They went raptor lights they are grill lights!