Replace ball joints Chevy Silverado GMC Sierra 1999-2011
Вставка
- Опубліковано 25 сер 2024
- How to install ball joints 1999-2011 GMC Sierra Chevy Silverado full labor guide. How to change remove install press in upper and lower ball joints
#Repair #Chevy #BallJoints
This was on a 2002 Chevrolet Silverado 1500 four wheel drive 4wd 4x4 5.3L
My Amazon store for featured tools & products: www.amazon.com...
My website for merch/tools/products/contact/socials: direct.me/carl...
Torque specifications and socket sizes provided on lots of our how to tutorial and step by step videos.
Disclaimer:
Due to factors beyond the control of FerKurl, I cannot guarantee against improper use or unauthorized modifications of this information. FerKurl assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FerKurl recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FerKurl, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FerKurl.
NICE VIDEO FER 🛠 🧰 🚗 💨
Your 10 minutes video makes it look so easy and quick that will be an all day project for me 🤦🏽♂️
I like the video,i like the music you listen too also.back when country music was real
Best youtube video on the subject 👌
Great choice of music
Great job guys! Well done. Thanks for sharing. Looking at the job, I was prepared to remove the axle as I am only replacing the lower ball joint. It's required to be replaced because the boot is missing, not because it is worn. Thanks again for sharing. God bless and stay well,
Excellent tunes!
Отличное видео !
Просто и доступно.
Thanks for the video Fer, I just subbed. Really helpful man.
Great video
Love some ole hank while I’m watching the tube
I couldn't get the lower separated on my 2000 silverado, so I cut it with an angle grinder. I got the ball part pressed out but can't get the taper to release, even with my shop press. And I can't get the new upper to press in straight. I have the same tool you do. I'm not sure what's going on there, but why won't this taper release?
Why does hole on ball joint have to face out? I did mine and didn’t know that you were supposed to do that. Do I need to go back and remove and rotate?
Nice video, my 11 axle nut is a 35 , ball joints all look factory original, having problems with the bottom one
Yep same I found out my 04 Sierra is a 35 as well. I used a 36 and still got the nut off but it stripped it a little bit -__-
Gmc Sierra 2000 2wheel drive lower ball joint removal.
Tell me how you fit a torque wrench on that upper ball joint studs. Just did my son’s truck and there was no way that I saw to get that sucker in there to torque it.
Most torque wrenches won’t fit. You can invest in a torque wrench that fits in tight spaces. I wrench everyday so I have a very good idea of how much torque I put on each nut I tighten.
@@FerKurl Thanks for the info. I appreciate the help.
Send it till it’s tight you’ll be alright
Have a 2011 Z71 crew cab with steel upper A-arms and the ball joints are not serviceable and the whole A-arm has to be replaced is the way I understand it. I didn’t see a c-clip plus in checking with the parts stores they don’t show just the ball joint for sale, only the whole a arm
yes depending on the year and model u may need to replace the whole control arm
Man I've been beating on my lower ball joint for 2 hours and it will not come out of the knuckle
Need a big sledge hammer.
This a 4wd type, fyi
Whats the torque specs for the ball joints
Need specs still?
Watch the video
My ball joints turn when trying to put the nut
Here’s a video of removal ideas if your replacing the ball joint that keeps spinning
ua-cam.com/video/BOUkv6hP2dw/v-deo.html
@@FerKurl sweet thank you
DONT CHANGE ONLY THE BALL JOINT WHEN YOU UP THERE GO AHEAD AND CHANGE THE CONTROL ARM THAT COME WHIT AN ALLREADY PRESS IN BALLJOIN ....ITS NOT VERY MUCH MORE EXPENSIVE AND YOU END UP WITH NEW BUSHING ...MADE THAT MISTAKE NOW IM PISS OFF
Hmm 🤔 why didn’t you record the entire process? When pushing the upper and lower ball joints off?
If you have any questions on the job ask away
What brand of ball joints did you use
Probably Moog
Thank you for taking the time to make this video and Answering a question
Seek Jesus! Repent for the Kingdom is at hand! Jesus is the way! The truth! And the life! He’s the ONLY way! Open the Bible, read and understand that we are in the last days! Put your full trust in him! Believe 1 Corinthians 15 1-4!
That's dramatic
How long are we gonna be on our last days?? Only been saying this for 2000 years. Fucking idiots.
😂😂😂😂😂😂😂😅😅😅😅💀💀💀💀💀 😂😂😂😂😂
You people are even ruining vehicle repair videos on UA-cam? Pun intended, but holy shit. You all need to just fuck off right over there. Go to a nationwide jonestown type of deal or something.
What does this have to do with replacing a ball joint?