not sure if you have mentioned this but if you are running Tephra V7 this was a known issue. i fought this for a long time with my evo 9. i ended up going to a Tephra v5.10 style rom and i never had the issue again. unfortunately this style rom doesn't have the big maps and the boost control tables do not offer as much resolution. I plan on going back to v7 since i will be running ID1700s and a Walbro 450 to feed my 6266 enough fuel on e70. so i'm sure i'll start seeing this again.
My Evo VIII MR pretty much does the same thing as yours. Once the engine warms up and goes to closed loop gets super lean AFR goes off the AEM wideband gauge almost dies then surges and repeats the process. When driving all good AFR readings accept when sitting idle at the stop light it wants to die. I switched out my Walbro 255 to DW 65C fuel pump and same issue. I do have a new COP system to install and try that out...who knows at this point if will help.
Do a coil on plug setup you can use k20 coil packs you just have to make a coil plant for them and I’m sure you can find the Wright up on how to wire it up we did it on my cousins evo and work fin he was kind of going through the same thing on his evo 9 and he did the same thing you did in the TB haha but I think it’s the tune tho
Your starter might have given up on you. I have the same problem, my car dies trying to go back to idle from driving. My starter gave out from having to start over and over every time.
Its all good bro ,we know what it's like,just keep on keeping on you'll find the problem.
Let's hope the issue is found soon!
not sure if you have mentioned this but if you are running Tephra V7 this was a known issue. i fought this for a long time with my evo 9. i ended up going to a Tephra v5.10 style rom and i never had the issue again. unfortunately this style rom doesn't have the big maps and the boost control tables do not offer as much resolution. I plan on going back to v7 since i will be running ID1700s and a Walbro 450 to feed my 6266 enough fuel on e70. so i'm sure i'll start seeing this again.
My Evo VIII MR pretty much does the same thing as yours. Once the engine warms up and goes to closed loop gets super lean AFR goes off the AEM wideband gauge almost dies then surges and repeats the process. When driving all good AFR readings accept when sitting idle at the stop light it wants to die. I switched out my Walbro 255 to DW 65C fuel pump and same issue. I do have a new COP system to install and try that out...who knows at this point if will help.
damn bro what a mystery we have lol! let's see what it could be!
And I’m sure you can find some k20/k24 coils from the junkyard
Check your iac valve or your map sensor happen to my evo 9 and the issue was the iac valve.
I changed both already :( lol
Christopher Goorbarry dam your evo is mad .
Had a friend who’s lean issue came from the fuel pump bucket itself. Once he changed it, it was running fine.
hmmm that's a weird one to catch we will see!
Christopher Goorbarry there’s a filter that’s not serviceable built into the bucket which was clogged for him.
Same issue with my evo 9..did u find out what it was;((((( desperately waiting for ur ans
Do a coil on plug setup you can use k20 coil packs you just have to make a coil plant for them and I’m sure you can find the Wright up on how to wire it up we did it on my cousins evo and work fin he was kind of going through the same thing on his evo 9 and he did the same thing you did in the TB haha but I think it’s the tune tho
Later on I would probably get a JDC coil pack!
Hey chris, what spring do you have in your TIAL Q bov??
damn I forgot but I believe in one of the videos I change the spring and cover which one I'm running. It depends on your vacuum
What made you go with an AEM instead of a walbro 450?
I only have 1000cc injectors 340 is more than enough honestly 450 walbro is good as well!!
Dang how did STM answer you so quickly? I’ve been trying to see the status for my manifold for 2months now and no answer 🥺
Bro send them an email to Info@stmtuned.com They haven't been answering the phone due to covid but they should answer through email.
Christopher Goorbarry thanks 🙏🏼 enjoying your channel btw! It helped me install my AEM gauges i followed your step by steps very well explained
I just installed this pump and I’m having starting issues now. I didn’t everything that you did and it’s just making a clicking noise
Did you get the car tuned?
Your starter might have given up on you. I have the same problem, my car dies trying to go back to idle from driving. My starter gave out from having to start over and over every time.
I have the same issue on my Evo 4
What injector are you running
1000cc FIC high Z injectors
@@ChrisGoorbarry hard to tell from the video but did you bypass resistor pack?
this issue is happening to me, im going to double check my pump and maybe get my tune check. =(
Try lower injector