Its a video i really want to do, my issue is having the time to do it as my full time job is pretty busy at the moment and havent had time to do it, so i havent had time to film anything lately, but im going to try and find some time soon to do it, so keep an eye out for when i release new videos, thanks for the comment
Thanks for the video! Easy to follow and made the job easy. Had a bit of trouble getting the rubber hose off the body just needed a bit of prying with the screwdriver and all sorted.. Next on the list, EGR Valve and intake manifold.
Hey mate great vid. I want to see you do EGR valve clean and in take. 👍after watching this video I was stuck at home (covid 19) went out the the bt50 and cleaned my throttle. And it was filthy want to go further but unsure.
Glad you liked the video, I'm still fairly new to making videos so if you see something that I can improve on let me know, also if you think of any videos I could make to help others let me know, I'm not a mechanic, so I only make videos that are within my skillset which means anyone can do it. Hopefully I can film the the I take video in next week or two, I still have to go to work unfortunately so it limits my time to film, but will try my best to get it done. Once again glad you like like the video, share it in Facebook groups or anywhere else if you think it will help other people out 😊
Possibly, but because it's oil based carbon, I don't think it would move it too well. I use a rag because it may absorb some of the wet carbon that's in the pipe
The Insight District - When you have got it done I’ll post it to the Mazda BT50 Facebook groups. Every second post is about the intake manifold or EGR delete etc.
I keep getting a check engine light and the scan says it’s the throttles position sensor. At certain speed the revs start oscillating, might it be I just need a clean?
Im thinking of doing this on my 06 ranger because my throttle is starting to actually stick. Like I'll step on it a bit to get it moving (its a manual) and the throttle will stick, so I give it a bit more juice and it goes down WAY to much putting me at 3-4k RPM, and I don't know if you've ever driven a manual before but you shouldn't be doing that to your poor clutch lol. So yeah, need to fix this. Pedal is free from carpet/matt hitting it and when pressing it with my handle shut off it is smooth, making me believe its the TB.
Your more then welcome, thats part of the reason i do the videos. make sure you share them in facebook groups and other groups you are in so that way we can help as many people as possible. If there is anything i can help you with feel free to get in contact and i will try and help as much as i can. Thanks for the feedback, its very encouraging to hear
@@TheInsightDistrict thanks. I already cleaned mine, very satisfied with the output. Acceleration is back to normal and not to mention the gas mileage. 👌.
Hi ,can some help me by sorting out my problem in ford ranger .when I start my car the engine start blow water through reserve tank ,wats the solution for this.
Hey, thanks for the informative video's! Am following them step by step ALL of them :D I have a 2014 Ford Ranger and the TPS sensor reads 94% all the time. And visually checking it, its way open all the time. I have trouble figuring out if thats normal.. Would appreciate your opinion on that, im VERY limited with proper workshops here (live in Myanmar and have to do most porblem solving and repairs myself) thnx!
Did you ever found out if that is normal? My TPS is always 100%, and does not move weather the car is cold or warm, much gas or no gas. Cant find any information about that.
you would have a higher fuel consumption and the vehicle wouldn't have as much power as it should due to the engine not receiving as much air as it should
@@TheInsightDistrictawesome video. when i start my vehicle in the morning i could not start it in 1 click, i have to wait for couple sec and try it again it start. does this symptom connected with my egr? i want to clean my egr.
I had the throttle body completely disconnected and was not rough with it, i had no idling issues and everything is operating correctly, have a watch where i am cleaning the butterfly and how i handle it
Superb...cleaned my MAF - then watched this...did my Throttle body! Easy! Great tutorial.
glad it helped
Awesome. Thanks for the tutorials and yes, I would love to watch EGR cleanup too.
Its a video i really want to do, my issue is having the time to do it as my full time job is pretty busy at the moment and havent had time to do it, so i havent had time to film anything lately, but im going to try and find some time soon to do it, so keep an eye out for when i release new videos, thanks for the comment
@@TheInsightDistrict no worries at all, take your time and definitely keep an eye for more videos from you.
Excellent video, thanks for this, I have subbed and am going to follow to do some diy preventative maintenance on my 3,2L px ranger
Thanks for the sub!
Thanks for the video! Easy to follow and made the job easy. Had a bit of trouble getting the rubber hose off the body just needed a bit of prying with the screwdriver and all sorted.. Next on the list, EGR Valve and intake manifold.
Glad it helped
Hey mate great vid. I want to see you do EGR valve clean and in take. 👍after watching this video I was stuck at home (covid 19) went out the the bt50 and cleaned my throttle. And it was filthy want to go further but unsure.
Glad you liked the video, I'm still fairly new to making videos so if you see something that I can improve on let me know, also if you think of any videos I could make to help others let me know, I'm not a mechanic, so I only make videos that are within my skillset which means anyone can do it. Hopefully I can film the the I take video in next week or two, I still have to go to work unfortunately so it limits my time to film, but will try my best to get it done.
Once again glad you like like the video, share it in Facebook groups or anywhere else if you think it will help other people out 😊
Looking forward to that EGR clean up.
ill try and make it ASAP 👍
the intake videos are out, have a watch of them
what is the biggest throttle body safe to use on a ford ranger 2.2 tdci?
Hey man how tu replacement radiator?
The cleaning of the hose would baby bottle brush do that better.?
Possibly, but because it's oil based carbon, I don't think it would move it too well. I use a rag because it may absorb some of the wet carbon that's in the pipe
Good video mate 👍🏻 I also want the intake clean video ASAP. Keep it up mate 👍🏻
I have a couple of days off of work in the next week or two so I might film it then, thanks for the feedback, it's appreciated
The Insight District - When you have got it done I’ll post it to the Mazda BT50 Facebook groups. Every second post is about the intake manifold or EGR delete etc.
Thanks mate. Very helpful videos.
not a problem, im glad that they help
after cleaning job,have to leaning with scanner or not?
nope
What does ESC service mean, it always flashing out on the dash
check out your vehicles manual and it might be able to tell you
After cleaning no need to reset or recall anything in the system? Thanks...
nope, its just plug and play
Hi, just wanted to ask. Do you know where the TPS sensor is located?
unfortunately i dont
I keep getting a check engine light and the scan says it’s the throttles position sensor. At certain speed the revs start oscillating, might it be I just need a clean?
Are you going to fit a catch can and EGR blank off or switch off on ecu?
nope never did either of those
Is that a 2.2 tdci?
I did this on a 2017 PX mkii 3.2L ford ranger
Im thinking of doing this on my 06 ranger because my throttle is starting to actually stick. Like I'll step on it a bit to get it moving (its a manual) and the throttle will stick, so I give it a bit more juice and it goes down WAY to much putting me at 3-4k RPM, and I don't know if you've ever driven a manual before but you shouldn't be doing that to your poor clutch lol. So yeah, need to fix this. Pedal is free from carpet/matt hitting it and when pressing it with my handle shut off it is smooth, making me believe its the TB.
yea it wouldnt hurt to do, i dont know what it would be like doing it on your model, but all you can do is try
Love your work!!!! Your saving me money, many thanks!!!
Your more then welcome, thats part of the reason i do the videos. make sure you share them in facebook groups and other groups you are in so that way we can help as many people as possible. If there is anything i can help you with feel free to get in contact and i will try and help as much as i can. Thanks for the feedback, its very encouraging to hear
Great. Can i use diesel intead of throttle body cleaner?
you can, dont know how good it will be though
@@TheInsightDistrict thanks. I already cleaned mine, very satisfied with the output. Acceleration is back to normal and not to mention the gas mileage. 👌.
Hi ,can some help me by sorting out my problem in ford ranger .when I start my car the engine start blow water through reserve tank ,wats the solution for this.
unfortunately this is too hard to diagnose over the internet, you may need to see a mechanic
Possibly leaking head gasket is my guess.
Did you recalibrate the throttle body to the pcm when reinstalled?
No i didnt, just plugged it in and turned it on, worked fine
Why do you need to remove the bottom hose for ?
just good to clean it out
How to replace the glow plugs..
This might be a little too technical for what I do, but I'll look into it
Hey, thanks for the informative video's! Am following them step by step ALL of them :D I have a 2014 Ford Ranger and the TPS sensor reads 94% all the time. And visually checking it, its way open all the time. I have trouble figuring out if thats normal.. Would appreciate your opinion on that, im VERY limited with proper workshops here (live in Myanmar and have to do most porblem solving and repairs myself) thnx!
Glad the video helped, check out the other videos on the page and make sure you share them in groups you are in to help other people
Did you ever found out if that is normal? My TPS is always 100%, and does not move weather the car is cold or warm, much gas or no gas. Cant find any information about that.
awesome vid,
Thanks heaps, I make videos to help people. Share the videos that you like in the groups you are in that way other people can learn and save money
Can I use a normal WD40?
you probably can, but i would use a solvent to remove any residue that is left over
What symptoms if any would you experience when you’re throttle body needs to be cleaned
you would have a higher fuel consumption and the vehicle wouldn't have as much power as it should due to the engine not receiving as much air as it should
@@TheInsightDistrictawesome video. when i start my vehicle in the morning i could not start it in 1 click, i have to wait for couple sec and try it again it start. does this symptom connected with my egr? i want to clean my egr.
Do you wait for the glow plug coil icon to go away before trying to start the vehicle?
@@TheInsightDistrict Yes sir.
@@jeakellliberato7072 there could be a number of factors causing this, its hard to determine without seeing the vehicle itself
My ford ranger dont have much power, what is the problem?
Without knowing the ranger or seeing the ranger in person it is very hard to diagnose what the problem could be sorry.
no problem touch The butterfly.because some people say can not touch The butterfly.maybe will be damage and idle problem
I had the throttle body completely disconnected and was not rough with it, i had no idling issues and everything is operating correctly, have a watch where i am cleaning the butterfly and how i handle it
Would i need to reset the idle?
nope, the ecu adjusts it for the correct air/fuel mix
I just cleaned mine at 40,000 km , I was shocked how dirty it was, how does it get so dirty?
via the egr
Where is the iac?
whats IAC?
Bro! wheres the intake manifold vid?
part 1 got uploaded the other day, have a watch