They look awesome. Kinda 3 stage feeling sounds great to. Also the haptic motors for abs looking great. I think I buy the inverted with hydraulic kit and one haptic motor. In the moment I have the asetek invicta.
Still the best brakes ive ever used man. Its amazing and the hydraulic I like even more softer initial press and imo still help so much with trail braking control. Also wait can you adjust the gas like the distance of travel? Dude nobody really ever shows or talks about that. Everyone says its to ling at times yet you can shorten it. Dang now im running to mine to check haha.
I think its great the Pro's and cons were so weighted in one direction, and both the cons can be avoided by not going with the inverted set...That aside, i wouldn't lump these in with the V3's, That's what I just upgraded from and these are much better in everyway, and when you fit the haptic motors, HOT DAMN!
I have heard that these are WAY better than the V3s. My V3's just died, after having them since 2015. So while looking for something slightly better in a similar price point, these have been the obvious choice.
I have these same pedals with hydraulic brake. One thing If you can you need the haptic reactors. Absolute game changer you know exactly where the limit is
@@Jose-pq4bcno I have the hydraulic mod. Also that pressure release is the same on all pedals using rubbers just like my Huesinkveld Pro pedals did it and so did my HE Ultimates
I have a Simlab P1X, and an inverted set up for my current pedals. Just trying to see how I can mount these (in shipping)? A shout out to Simshop who I purchased these from. Based on email to them, they realized I was aiming for an inverted set up, but on my existing inverted structure. After hours, I was able to speak with them and get the right parts for my needs.
What do you need to do extra to mount them to existing inverted structure? I have simlabs gt1 evo with simlabs inverted mounts already and I’m looking to do the same thing
Shaun, I have a set of V3 Clubsport Pedals with load cell from Fanatec that I've never been able to quite figure out after 7 years. Would you say the P1000 inverted pedals are an upgrade from that or should I go for the P2000 hydraulic pedals to upgrade from those?
Great rev as always! During which I noticed you have the R seat P1 and it looks as though it’s on a motion platform. I also have the Rseat P1 and would love to know what type of motion platform is compatible with it. Kindly advise.
Great review as always! Could you test how much does the registering of the brake pedal drops while keeping a constant pressure with the foot? I saw people saying it drops by almost 20% which i think is crazy for a pedal of this level.
Several things to note. This is inherent in all pedal sets that use rubber/poly regardless of make. Softer rubber discs will register larger drops than harder ones. So if you understand this then, if you use softer rubber compound you will want to switch to hall sensor. If you use harder compound then use load sensor. It's all about understanding and knowing what to do.
@@wangte27 yes, i see that but that drop on the pedal measurement is usually 10% at max but on this pedal it is said to drop 20% or even almost 30%. This is too much.
Just to confirm. If I buy the inverted ones can I still flip them to be regular. Or is the only way to have both options to get the regular and the inversion kit
Thinking of purchasing the inverted mount for TR160 mk4 so I can space these pedals to my liking. Do you know if the standard P1000 pedals without the inverted mount can be removed from the base and mounted to my own plate? Or in this case the Trak Racer plate. thanks,
Technically you could, but the problem you'd run into is the controller box is bolted in the pedal tray. The P2000 can be mounted anywhere and they are releasing a haptic add on for it soon.
Great review Shaun, hopefully you'll get the add-ons soon and revisit these again. Yes I'm talking to you SIMAGIC! 😉
They look awesome. Kinda 3 stage feeling sounds great to. Also the haptic motors for abs looking great. I think I buy the inverted with hydraulic kit and one haptic motor. In the moment I have the asetek invicta.
just got mine in hydro inverted with 2 haptic only (throttle & brake). no regrets, much better than i ever expected :)
Have you got them?
Amazing review Shaun. Just waiting on your review with the haptic motors 😎
Still the best brakes ive ever used man. Its amazing and the hydraulic I like even more softer initial press and imo still help so much with trail braking control.
Also wait can you adjust the gas like the distance of travel? Dude nobody really ever shows or talks about that. Everyone says its to ling at times yet you can shorten it. Dang now im running to mine to check haha.
I think its great the Pro's and cons were so weighted in one direction, and both the cons can be avoided by not going with the inverted set...That aside, i wouldn't lump these in with the V3's, That's what I just upgraded from and these are much better in everyway, and when you fit the haptic motors, HOT DAMN!
I have heard that these are WAY better than the V3s. My V3's just died, after having them since 2015. So while looking for something slightly better in a similar price point, these have been the obvious choice.
I have these same pedals with hydraulic brake. One thing If you can you need the haptic reactors. Absolute game changer you know exactly where the limit is
Do you have the problem of the reading from the brake pedal droping while mantaining the same pressure with the foot when using the hydraulic upgrade?
@@Jose-pq4bc no it stays right where It’s at
@@njracer34Do you remember if that happened when using the elastomers/rubbers on the original brake?
@@Jose-pq4bcno I have the hydraulic mod. Also that pressure release is the same on all pedals using rubbers just like my Huesinkveld Pro pedals did it and so did my HE Ultimates
has been software addressed.@@Jose-pq4bc
been debating on these, thanks for the video.
I have a Simlab P1X, and an inverted set up for my current pedals. Just trying to see how I can mount these (in shipping)? A shout out to Simshop who I purchased these from. Based on email to them, they realized I was aiming for an inverted set up, but on my existing inverted structure. After hours, I was able to speak with them and get the right parts for my needs.
What do you need to do extra to mount them to existing inverted structure? I have simlabs gt1 evo with simlabs inverted mounts already and I’m looking to do the same thing
Shaun, I have a set of V3 Clubsport Pedals with load cell from Fanatec that I've never been able to quite figure out after 7 years. Would you say the P1000 inverted pedals are an upgrade from that or should I go for the P2000 hydraulic pedals to upgrade from those?
100% worth the inverted
Surprisingly for me the blue string felt softer than the yellow one.
Same here
Great review… as usual! How do they compare to the Simtrecs ProPedal GT?
Great rev as always! During which I noticed you have the R seat P1 and it looks as though it’s on a motion platform. I also have the Rseat P1 and would love to know what type of motion platform is compatible with it. Kindly advise.
it's the Dbox RSeat HF-L4
Great review as always!
Could you test how much does the registering of the brake pedal drops while keeping a constant pressure with the foot? I saw people saying it drops by almost 20% which i think is crazy for a pedal of this level.
Yeah, for sure.
That doesn't happen with the hydraulic brake.
@@ty194 do you have the hydraulic brake upgrade on the p1000?
Several things to note. This is inherent in all pedal sets that use rubber/poly regardless of make. Softer rubber discs will register larger drops than harder ones. So if you understand this then, if you use softer rubber compound you will want to switch to hall sensor. If you use harder compound then use load sensor. It's all about understanding and knowing what to do.
@@wangte27 yes, i see that but that drop on the pedal measurement is usually 10% at max but on this pedal it is said to drop 20% or even almost 30%. This is too much.
These are so bad ass!
Just to confirm. If I buy the inverted ones can I still flip them to be regular. Or is the only way to have both options to get the regular and the inversion kit
That kit look like it means business!! If you're not careful you can kill someone with that thing, lol!!!
I have the SIMMAGIC P1000, is this the same set but the inverted version just never seen the I before?
Yup, it's the same set, just with the inverted tray
I’m trying to figure out why I have the same pedals but have different things on them
I have a module on the bottom with a cable attached to the side supports that goes into the module
Im not sure if your mistaking the p2000 with the p1000 in regards to upgrading too a 200kg loadcell. P1000 do not show you can upgrade the loadcell?
Yes you can upgrade them to a 200kg depends where you buy them at. So must be an upgrade coming out
Thinking of purchasing the inverted mount for TR160 mk4 so I can space these pedals to my liking. Do you know if the standard P1000 pedals without the inverted mount can be removed from the base and mounted to my own plate? Or in this case the Trak Racer plate. thanks,
Technically you could, but the problem you'd run into is the controller box is bolted in the pedal tray. The P2000 can be mounted anywhere and they are releasing a haptic add on for it soon.
Great video
where u get those trainers Shaun
can this be mounted on a NLR 2.0 rig and remain sturdy?
Do you think it's worth upgrading from v3 fanatec to these or the p2000?
absolutely, i had them and i got the inverted ones wit haptic and is night and day
They are much better than the V3s. I tired them at the expo with the haptic add on and they are a game changer
@@TheSimpitDo the P2000's come with haptic? Couldn't tell from their website.
@@mrpurple1901Do the P2000's come with haptic? Couldn't tell from their website.
@@SquiggyWigginzno. They don’t.
I WANT THEM! Do they fit on the P1X (original) rig? Cheers.
Yes they do, you'll have to move the profile a bit to get the bolts to fit in the profile groves with the tnuts
@@TheSimpit Thankyou, I've been running Fanatec V3's forever, not doing it for me anymore. These look great!
Simagic P1000 or Simtrecs, which would you recommend?
Both are a great set of pedals. it really comes down to what you are looking for in pedals.
Can you combine the hydraulic and haptic feedback together?
Most definitely
I have haptics on brake and throttle and hydraulic mod
Title needs a little typo fix ;)
The ones he was sent are that 1 better than the rest 🤣.
@@OldCraig91percs of being a reviewer? 😅
lol fixed thank you
I dig those shoes!
Are you able to you use these with a Fanatec wheel n base?
Yes you can!
Hey Shaun you still in Wa?
Hey man, nope I'm back in Cali
😮