How to Set Your Honeywell Brand Door Knob Codes, Auto-lock, Delete Old Codes and Factory Reset
Вставка
- Опубліковано 8 сер 2021
- Buy me a coffee? www.buymeacoffee.com/diytechn... Buy me a coffee? www.buymeacoffee.com/diytechn... In my video "How to Set Your Honeywell Brand Door Knob Codes, Auto-lock, Delete Old Codes and Factory Reset" I show you how to program your new Honeywell Brand programmable door knob to perform to your liking. It has silent features as well as auto locking and interior control to the max. It was a little on the expensive side to purchase but it was well worth it as it contains a bunch of unique security features.
The Honeywell Digital Knob Handleset features a programmable lock that allows you to set up individual codes for multiple users. a backlit keypad that automatically lights up when its being used, and a remote control fob for easy access. Adjustable latch fits 1-3/8 In. - 1-3/4 In. thick doors and 2-3/8 In. - 2-3/4 In. adjustable backset. Lock can be easily rekeyed by any locksmith. Locks have a Grade-3 Residential Security; tested by ANSI (American National Standards Institute) to meet standards for residential security. E-Z installation with a Phillips screwdriver when holes are pre-drilled into door. Can be installed on left or right handed doors for your convenience. Package contents include an adjustable latch, adjustable backset, mounting hardware, instructions, drilling template, remote control fob with back up key, and two (2) additional entry keys for non-electronic access. They claim that this is backed by a mechanical and finish limited lifetime warranty.
Here’s a link to the owner’s manual and set up guide:
honeywellsafes.com/UserFiles/M...
TO UNLOCK THE LOCK Using Keypad: Enter a valid User Code (default code is 1234) and press (Unlock button) and hear 1 beep and lights green.
TO LOCK THE LOCK Using Keypad: Press (Lock Button) and then hear 2 beeps and lights red.
Changing Programming Code
CHANGE CURRENT OR PRESET PROGRAMING CODE (PC)
Factory default Programming Code (PC) = 123456, this is the master password for your lock. All programming functions require this code. Follow the below sequence to change the Programming Code (PC) to your custom 6 digit combination.
Type in (PC) + (Unlock Button) + 4 + (Unlock Button) + (New 6 digit PC of your choice) + (Unlock Button)+ Re-enter New PC + (Unlock Button)
Hear 1 beep and Light Indicator illuminates green. Record New and Changed Codes so you won’t forget them.
TO ADD A NEW USER CODE (you can add up to 50 new user codes)
The User Code (UC) must be a 4-8 digit combination. Each User Code (UC) is then linked to a User ID (ID) (which is any number between 01-50) to identify an individual User Code (UC). (User ID [ID] 1-9 should be entered as 01-09 so they are 2 digits).
As an example: to add the User ID-08 to User Code-5678, enter the following:
(PC) + (Unlock Button) + 1 + (Unlock Button) + (08) + (Unlock Button) + 5678 + (Unlock Button) + 5678 + (Unlock Button)
Hear 1 beep and Light Indicator illuminates green. NOTE: When a NEW USER CODE is set, the default factory code (1234) is deleted for safety. Record New and Changed Codes
Deleting User Codes
Delete one existing or preset user code
The programmable knob comes with a factory User ID (ID)= 01 for User Code (UC)=1234
In order to delete 1 User Code (UC), the lock must have more than 1 User Code (UC) in it’s database
(PC) + (Unlock Button) + 2 + (Unlock Button) + Existing (ID) + (Unlock Button) + re-enter (ID) + (Unlock Button)
Hear 1 beep and the Light Indicator will illuminate green.
Delete all User Codes:
This will delete the user codes (UC) but not the programming code (PC)
(PC) + (Unlock Button) + 3 + (Unlock Button) + re-enter (PC) + (Unlock Button)
Hear 1 beep and the Light Indicator will illuminate green.
Automatic Lock Function:
This one is one of my favorite functions of this nice lock
Set or Cancel Auto Lock
You can set the lock to automatically close after each time the lock is opened. Time value range = 20 - 900 seconds, enter the following:
To set the auto lock (PC) + (Unlock Button) + 5 + (Unlock button) + Time Value + (Unlock Button)
Hear 1 beep and the Light Indicator will illuminate green
Secure Lock-out Period
Warning sounds and LED flashes red after 4 incorrect code attempts: Keypad shuts down for 30 seconds.
Turning Sound On or Off
You can “mute” or turn the “sound on” on your lock by entering the following. (Factory setting is sound on).
(PC) + (Unlock Button) + 6 + (Unlock Button) + 1 or 2 + (Unlock Button)
1=sound Off
2=sound on
Sound Off (1) - Light Indicator illuminates green. Sound On (2) - Hear 1 beep and Light Indicator illuminates green.
Here's a paid amazon link to a Honeywell Safes & Door Locks - 8732401 Electronic Entry Knob Door Lock, Oil Rubbed Bronze, 6.5 x 8.8 x 9 inches:
amzn.to/3Bovciq
My amazon influencer page: www.amazon.com/shop/diytechni...
My website: www.diy-technician.com - Навчання та стиль
Thank you, I had order the exact model from Amazon and it came with French and Spanish instructions. The schematics was easy for me to read, but not the programing. Thanks again.
Glad this helped. Thanks for watching and commenting!
Thanks! Just what I needed.
Glad to hear it. Thanks for commenting!
But wait. How do you delete 1234?
How are we deleting 1-2-3-4 ?
I’ve already factory reset and everything !
after adding a new code, does the code number become part of the person’s 4 digit code: so, code 02 1456. Does this person enter 021456 as his new code or just 1456?
Just 1456.
Mine is not locking fully, I can turn the outside one direction then the other a couple of times and it unlocks…..no issues with strike plate or any other alignment. Is there a way to reset the position that the gear stops???
Good question and I’m really not sure. Maybe someone can answer in the comments. Best of luck to ya
I added a new code already it works but why does 1234 also work? How do I delete the 1234 and just keep my new code? Thanks
Sure. I would pull the batteries and restore factory settings and do the process again.
When the door is locked, after you enter the code to unlock the door, is the door still remain locked at that point or unlocked? For the Schlage brand, after entering the code to unlock the door, the door remains locked until you reach over to rotate the lever to unlock.
It should unlock after inputting the code
Hi, I just installed this but the 1, 4, and 7 buttons aren't lighting up or making noise. Are they broken? I've tried taking the batteries out and resetting it. Should I take them out over night and let all the juice drain and try again tomorrow?
Good question. I have not had that same issue before. Maybe someone in the comments can support answering your inquiry.
Hello, I need to reset the default code. Do I do this with the door open or closed? I have tried both and I am not sure if the admin code took.
I have a video on doing just that.
how do you lock this door ? just hit the lock button and close it ??
once you have your programmed code in there all you do is shut the door. You should hear it close again in around 25 seconds or so. That's how you know it's locked. You can change this setting if need be too (to sooner or immediately).
Can you show how to change the batteries, please?
Well you just pop the cover off the back and change em out. Let me know where you may be encountering an issue.:)
@@DIYTechnician I will try that. I didn't install it so I wasn't sure, and am afraid of damaging it. Thanks!
@@zaydamedina1475 yeah it’s a nice one once you get it installed. I’ve got some vids on how to program it too. You’ll like it once you get it dialed in.
Only some of the numbers on my keypad will light up can you help
My first guess is to change out the batteries for some fresh ones.
Mine is opening the door with just pushing the upper button, don't you know how to change it? Thanks
I think you need to do a factory reset by pulling the batteries and then reprogram it
@@DIYTechnician thank you. I had tried multiple times following the directions with zero success and then I did the battery pull master reset and then it worked!! Thank you
Why do you need a user ID? Does every user in your “circle” need a different ID and code? Can you have one user ID for everyone?
Yeah you can have one code for everyone
Pourquoi je ne suis pas capable de barrer la porte seulement capable de l’ouvrir quoi faire!
I think you need to reset it and start over with the programming codes. Have u tried this already?
So in order to get rid of “1234” you must follow step 5 of the instructions. Input admin code and press unlock. Then press “3” and unlock again. Then reenter admin code and press unlock. Done. Now the only code that should work is the admin code you set.
Thanks!
Mines just blinking red
Did you pull the batteries out of the back and put fresh ones in?
The manual key isn’t working just spins the knob
I’d say reset the whole works by taking the batteries out and reprogram.
When I unlock mine. It auto lock back in like 1 second
You can program how much delay there is before it locks
This lock is trash. Honeywell products are low quality. This doesnt really work as it should.
Which one is the best?