Thanks. Good for reassembling my governor. I removed the gear shaft by drift pin and hammer from outside, must remove flywheel, shaft reinstalls fine (seemed easier then removing clip).
What type of speed increase would you see from this? I have a Jiangdong 5.5hp which is a Chinese clone of the gx160 and I want to do it if I get a substantial increase in speed
Thank you. You did an excellent job explaining and showing how it's done.
No problem, I'm glad that my video can help you
Excellent job explaining this process. Thank you!
@@bryanmccrea2351 no problem, I'm glad that my video can help you
Thanks. Good for reassembling my governor. I removed the gear shaft by drift pin and hammer from outside, must remove flywheel, shaft reinstalls fine (seemed easier then removing clip).
Thanks for letting everybody know. This may be an easier way for others thank you.
Good job, good explanation. Thanks for taking the time to do it.
No problem I'm glad that my video could help you
How do you set the idle speed after removal?
Do you manipulate the throttle manually using just the carb intake baffle?
What type of speed increase would you see from this? I have a Jiangdong 5.5hp which is a Chinese clone of the gx160 and I want to do it if I get a substantial increase in speed
@@ej_automotive depending on the weight that is on the mini bike from 25 to about 38
@@JOATD woah! Totally worth it. I’m doing it! Thanks for the video!
@@ej_automotive no problem I'm glad my video could help you
Thanks for the detailed explanation 👌🏾
You're welcome I'm glad my video could help you
Very informative video right there, what is the size of bolt in that crankshaft hole in the middle. To lock the pulley in place.
Thanks a lot bro that was so helpful
No problem I'm glad my video could help
Great tutorial.
Thanks I'm glad that my video could help you.
nice vid! Does getting rid of the governor give you throttle control?
No you still have to link everything up I'll have a video on that maybe tomorrow
You have to change some things around to get throttle control.
How strong is the stock rod on the gx160?
great vid, thank you
No problem I'm glad that my video could help.
hi, do you think we need to upgrade the engine oil grade after removing this governer?
No you can keep the same oil. Done it multiple times never had a problem
I remove the plastic gear from my enegine but not the governor is it fine whitout it?
That is the governor
Why they use this governor? What is doing?
It automatically maintains the rotary speed on a engine
@@JOATD Thanks man.
Use a Dremel