Відео

Great straightforward video.

Real!!! Respect!!!

Supppper straight forward vid man thank you! Nice Hemi!

JACK the car up, remove the splash cover, use the breaker bar from the bottom, and remove the belt off from the bottom. Remove the bottom bolt , then come up top and finish doing the rest. 45 mins is the longest time . Us e the stubby socket or use the wrench on the ground for yhe bottom Bolt. Way easier

Nice! Ever find how moisture got in in the first place?

Where can I find parts for my pressure washer is a Honda Gs190

Where is the link?

Glad I have mine! Works great! Thanks for sharing!

Thanks Dre!!!

I have A TC3000 and it starts and works fine unless i get on it. Then it only lasts about 5 minutes then shuts off and will not let me turn it back on until it cools off. Now, if i get on it 4 like 3 minutes and keep it running. Just with no one on it. It will let me get back on it 4 another 3 minutes till it turns off again. Any ideas? My board is very dusty. Might that be my issue?

Got my gxxxr almost a year but it's been in storage the whole time, I've noticed this problem ever since I got the bike, I've read around that this is the magic trick! Will try to do it this weekend and let's see! Thanks for the video!! 🙏🏻🙏🏻🙏🏻

Great job brother .I have learn alot from your video..I have a E70 I change the fuel pump for the hard to start issue turn out it was a bad relay.thanks again

We must be on the same wavelength because this is twice in a week that one of your videos has been exactly what I need for my X5. This was incredibly helpful and now I can set my sub and amp up tomorrow with confidence. Now I'm going to have to browse through the rest of your vids and see what other X5 goodness you have out here. ...and I'd like to buy you a beer sir.

Piston Dosent have to be at TDC or BDC?

There's actually an arrow on a crank to line up the timing to the front

Thank you 👍🏻👍🏻

What i have done i just blocked the incoming side on control valve. Here in South Africa we never use the heater.

This was soooo clutch! Worked like a charm and saved me from pulling the whole console apart (on an 11 year old car, where every piece of plastic you pull on breaks). Only hard part for me was that each and every piece in each little door had separated, so fishing them all out to then put the new ones in was a knuckle buster for sure.

Great video part number saved me

What if the relay and pump works, but no power to pump.

Awesome job

Thank you.

Thank You Good video !

mine do this in my leaf blower with my older larger m18 batteries but it works fine with mynewer batteries??

These motors are not what they used to be, starting to wonder where they are being made these days.

Thank you

red hose is not at the right place!!!!

My girlfriends XB has a loud whirring sound i noticed some play in the tensioner pulley but it spins freely. Water pump, alternator and ac compressor spin freely. The tensioner had some play or wobble when belt was off could this be what wrong judging by what i described? Ty in advance

5:35 I don't have this relay.. 2007 3.0d 173kw..

helpful, thank you

Great video. How can i make it only for the blinkers in the back?

Is the an Autel mx900 able to use to diagnostic Ford focus/Fiesta pcm as well???

Couldn't you have simply used your vehicle's fuel pump?

Stupid German engineering , why they make it so hard for mechanics?

Couple of things - you cant dismiss that it needs to be unplugged, there are directional arrows on the belt, adjust the tracking in the direction of use and under power to accomodate for any movement.

Thank you man, this is what I was looking for

Do u think I should upgrade valve springs after taking off gov.

Best video on this by far. Mine broke this morning while it was still running; solved by noon with your video (and a couple others after my valve came out in pieces that resulted in a second trip to the store for super thin needle nose pliers...).

👍🏾💞👍🏾

13 days ago is crazy we need new content 🤷🏾‍♂️

33’s is enough

Very detailed Great camera work Be doing mine soon

Thank you ... Subs !!!!

Do you have the controls behind the steering wheel to adjust the volume and channels? My dodge has them but when I added the the radio which is also a BOSS, I lost control of the controllers to the steering wheel. Was wondering if you had to connect anything else or buy a different modular that have access to the volume and channel controls 10:17

Hi, happy new year by the way, I have a question, I got a 2005 ram 1500 5.7 hemi, I got a code p0404, I started checking the egr valve and before I did anything I noticed it was flooded in coolant, so i decided to remove it and when I was taking it apart, the first thing I did was remove the pipe and found that some one use a metal plate to complete seal that entrence so when i start to unscrew the otter side coolant started to come out of that side, now I never seen that before. Do you have any idea on why it’s coolant coming out from there?? From that hole where the egr it’s connected to on the engine ??? I will really appreciate any help, thanks in advance

My Man! You tube super dude! I have the exact same machine. Belt went off or stripped. Not sure yet. But I could NOT figure out how to pull that disc off. Excellent video. Really clear and detailed. Good sound, all good!

Ty nice and detailed video

You go to school to learn all this?

How’s the gasket maker holding up?

Very good video! Specs show 65 ft lbs. for ball joint fasteners, 158 for hub nut and 76 for lug nuts. Maybe your model was different? Mine is 2009 Corolla LE.