2006 Ford Mustang GT Thumpr™ Cam Install
Вставка
- Опубліковано 16 тра 2011
- www.compcams.com/ The guys at Pro-Dyno install a pair of stage one Thumpr™ Cams in a 2006 Ford Mustang. Watch the step-by-step installation process and hear the before and after difference in exhaust note delivered by the nasty-idling characteristics of a Thumpr™ Camshaft.
Facebook: / compwins
Twitter: / compcams
The dimension of sound you have added to your car is what makes the hair on my arm stand up. I, quite frankly, wouldn't care if it didn't make any extra horsepower, the symphony of sound it cranks out is worth the price of admission. Great work, Sir!!
Pro Dyno is the only ones i trust to do mods on my Mustang
These are cams for sound, they use the stock valve springs, they have other cams that use the stock springs that give 30+. These are for sound
Thanks for watching, Tim! We're glad you found it informative and enjoy the new cams!
Thanks for watching the video! Your best bet is to contact our CAM HELP line at 1.800.999.0853. The techs will have some questions about your engine and overall setup, and will then be able to help you pick out the best cam for your 5.0.
Ive been holding out for the right 5.0 but the 4.6s are starting to grow on me now...
Thumbs up for showing the install on this video, getting ready to do cams myself and this was the method I wanted to use (no spring compressor), thanks!!!
Thank you all so much for the wonderful install tutorial !!! Sound is fantastic!
Yes, at about 2:29 they talk about this. Basically, they don't let the chain move off of the sprocket, then install the new cam the same way the old one came out. The shop that did this install had done it many times before, so they really had the procedure down as simple as possible. Thanks for watching!
We're happy to hear that! Thanks for watching!
i was expecting at least 60-70whp with the cam and tune! 11wph can come from an intake and header back
I'll be going with the FRRP cams and heads myself and later an Edlebrock charger ! The FRRP parts have been tested specifically for the Mustang GT 4.6L, 3V motors so you will get the most bang for the buck.
Hi Mike, Yes you do need the phaser limiter kit part# 5449 with the Thumpr Cam. Thanks for asking.
NO ONE DOES IT BETTER THAN DAN @ PRO DYNO!!!
This project was actually done at Pro-Dyno, your best bet would be to contact Pro-Dyno.net for any specifics. Thank you.
It depends a bit on your application, but they retail for $200 - $300. You can check out compcams.com for exact specs. Thanks so much, glad you liked the video!
This shop is in Fort Mill, SC - outside of Charlotte. Thank you.
The work on this car was actually done at Pro-Dyno, so your best bet is to contact them at pro-dyno.net for any specifics. Thanks!
Some require a tune and phasers others have no requirement and fit right on with factory parts depends what u want to really get in to
dang! i was honestly pretty scared to tackle this install, but i think I may just have to do it now!