Funny I thought you would need some fancy ox-propane mix for it to cut but I made mine using ambian air and it uses a very thin pen tip for the nozzle and cuts metal pretty easily and uses just regular propane
made? how about a vid demo of it to see what you are talking about , i doubt you can cut metal with propane/air ,,not hot enough and no such thing on the market either , maybe you melted tin or aluminum
@@ARCSTREAMS good answer - I have found though that those 'spray paint' can type fire extinguishes are built to last and are worth having ($10) - the 'normal' fire extinguishers seem to leak - I don't like flames inside any more and I was lucky many years indoors
i am familiar with the small butane torches and had one long time ago but not sure where you getting co2 from? i don't think co2 is used in any of them as it is just an inert non flammable gas, not sure what you were asking with your last paragraph?
many ppl ask me already and the answer is no because some of the parts came from a small torch kit (ie the gas mixer body and the jet flame needles) so aside from the needle or flame nozzle i do not know if you can make the gas mixer part from parts you find , all i did was figure a way to attach small hoses to it with some fittings and the hoses are for propane canister and oxygen cylinder with separate valves and fittings , i have so many ppl asking me how i did it,, perhaps i can make another video to show the parts so it is self explanatory and ppl stop asking me how to di it lol
1:30 what you did there is something called fusing, or turning metal into something else, try using it on copper and lead to get silver or gold if the temp is right
1:30 was burning or cutting the metal not fusing , fusing means to weld and i am not able to weld with propane gas because it creates oxidation porosity and the metal is very brittle and breaks apart easily, besides fusing does not change the metal into something else, idk where you are getting this from? and silver is not made from copper and lead ,silver like gold is pure metal not alloy nor can you create gold lol you watch too many movies
@@ARCSTREAMS It's funny how you see it lol I can't say I blame you, I was thinking the same thing, it's hard to believe. And yes, fusing means to weld. Welding/fusing and fission atoms to change their properties or turn them into new elements is not a new concept, scientists have done it before, look up "synthesis of precious metals" and "lead to gold." Their argument is that it costs more to produce gold than it is worth (They never said it is impossible). Lowering the temperature is one method, electrolysis is another, and dissolving the metal in acid is yet another. Metal oxidation can be easily avoided or turned into other salts to lower the melting point (depends on the salt you used). In any case, if you decide to melt copper and lead, avoid breathing lead vapor (Also, ensure that the lead and copper are as pure as possible. ).
@@kamelsamer5768 fission is not the same as fusion, fusion does not create new element(ie monoatomic like gold ) it may create alloy, as for lead to gold i dont think anyone achieved that yet nor have i ever heard of scientists or anyone actually creating gold even if it costs more than its worth they have not proved it possible to my knowledge but it is alchemist dream ,(lower temp,electrolysis,acid) explain how any of those methods you mentioned can create gold? as for welding with propane it is not possible even if you mean using flux when you say use salts because the oxidation is not just from the atmosphere it happens internally in the fusion with propane ,something to do with redux otherwise explain how to weld metal with my oxy/propane torch id love to know and finally why would i melt copper and lead? what will this do other than make a machinable grade of copper?
@@ARCSTREAMS Fission is not the same as fusion, but fusion of two or more elements can result in atomic fission, which can shift the atom's position to the nearest stable element, transforming it into another or several elements (The outcome is affected by temperature, pressure, energy, and the elements used etc...) Hydrogen, for example, has the atomic number one and the symbol H, H+H = He (helium) + energy, helium has the atomic number two, so 1 + 1 = 2 + energy. I hope this clarifies things for you.
yeah my dad did that too with his medical oxy generator ,seemed to work pretty well but very low psi and not very adjustable,, i use a 60cuf oxy cyl , btw i also made my own thermic lance rig which i also use the oxy cyl for ,love oxygen for many uses,, i should one day make a video of it, it was very fun burning holes right through a brick , steel plates , tungsten and even can be used underwater
@ARCSTREAMS Sorry for bothering you again, but I've actually found a way to make flash copper using electrolysis to make sodium cuprate. Meaning you can now plate aluminium perhaps.
idk what sodium cuprate is ,,ifyou found an easy way and it works to plate any metals without pre strike then great,let me know how it goes and how to do it
@@ARCSTREAMS Yeah, I'll let you know. Basically, about sodium cuprate, that's the only known(public) way to make copper dissolve in an NaOH solution using the electrochemical method. Making it chemically is protected by trade secrets, so trying to make it chemically is almost impossible. However, I actually managed to make sodium cuprate as I've mentioned before. Other than cleaning and preparing the surface, yes, flash copper is the only way to plate something like aluminium or stainless steel. And yes, again, I'll let you know. It's strange nobody's tried it before on UA-cam or elsewhere though. I wonder why, especially since flash copper is so expensive.
@@neutronpcxt372 NaOH what was the OH again? its been a while,some kind of acid i guess,,yeah you need to try and see if it works before you wonder why no one else has it on yt ,perhaps it wont work
@@ARCSTREAMS NaOH is a base. Sodium hydroxide. Can easily be acquired from soap making shops. Actually, the reason I've discovered most people don't plate with flash copper is that not only is the solution difficult to make(since it requires specific ratios to work), but because it can't be easily with most power supplies since you need high current and low voltage. Too high voltage = only copper oxide. Too low current = Ultra slow. I'll post some pictures of the progress I've made in a few minutes.
@@ARCSTREAMS Here is the picture with everything I've managed to make: i.postimg.cc/B68z6MDS/IMG-20190407-150106.jpg Zincate solution, flash copper, deanodized aluminium flashlights, and the like.
not in this particular case it will not work ,if you want to use air you need a special torch head which combines the gas(propane) with the right amount of air from the atmosphere ,it is completely different torch head and size and the flame temperature is lower ,you can still find such device for sale in hardware stores if that is what you looking for
what is oxygen return regulator? i think you are confusing a regulator with a flashback arrestor, the oxygen line has a flashback arrestor ,the small propane tank does not because its a different hose and they dont come with those ,,i had a few flash backs into the line but they are very small and dont travel that far and rarely happen if you know how to operate it ,but it takes about 50% OXY/FUEL ratio to blow anything up i think and that wont happen ,,do you suggest i insert some stainless steel wool into the hose for the propane line?
these are not parts you can just go and get ,i just happen to find some of them and i had the gas tanks (oxygen and propane) and the torch itself is a mixer head and needle(s) for different size flames that came from an old jewler kit my dad had ,i just got lucky i was able to jerry rig the parts together with some gas lines hooked to the tanks,,its pretty basic stuff,,i cant tell you how to glue things together or find the right fittings etc besides its not like most ppl can juts go and buy a 60cuf oxy tank with regulator just for this small project,,,video is not a how to
@@VerbenaIDK yes the ones you see here on yt are hho generators which is hydrogen created from electrolysys of water so it becomes a mix of 2 hydrogen atoms and one oxygen atom (if i recal correctly) but there are welding/cutting torches that use separate hydrogen and oxygen ,i think they use them underwater but you will have hard time doing a search on it because the only thing that comes up is hho or hydrogen generators ,you would have to use words like "hydrogen gas cylinder for welding and cutting" ,here is a link i found speaking about it www.linde-gas.com/en/products_and_supply/gases_fuel/hydrogen.html i wish they sold hydrogen canisters like they do propane or mapp gas at hardware stores that way i am able to use my mini torch for welding ,maybe in the future they might,,why are you interested in this?
yup im just showing off as i think its cool to share plus i never said this was a do it yourself vid , as i already explained numerous times in the comments this is not something i can tell you to go get parts for, i simply happened to have them and put it together ,the important part is the torch mixer head which is not something i made but it happens to be part of an old kit i had
@@ARCSTREAMS it looked like the ones we used back in the day. televisions with 13 station identifications, that went to sleep at midnight, playing the star spangled banner, every night. those days. cool torch by the way. if only you could get an aerosol can cut in half and put in some diatomaceous earth, then weld it, and put some acetylene in it. that'd melt copper and gold.
@@buckwheat7424 it be easier to buy an acetylene tank than build one but i can melt gold and copper with this no problem,i dont need acetylene unless i want to weld instead of braze
because the torch i put together has parts that came from a minature set and not something i built myself,the only thing i did was figure a way to make it fit gas lines to an oxy cyl and a propane cyl ,so you would have to buy an oxygen tank and regulator with hose and a small propane cyl with small hose and fittings,,quite costly and not exactly something i can explain in a tutorial
@@ARCSTREAMS oh ok. Well if you can find a way to make it after taking a quick trip to your hardware store then let me know because that would be a video I would be interested in
i doubt you can find the right parts in a hardware store to make something this small ,they are custom made pieces,,anyways if you are looking for a small torch set i am sure you can buy one
this is not a "how to" video and besides it is simply just a bunch of gas lines and fittings that go into mixing torch head ,i did not make the head it is from old jewler torch kit made for seperate torch attachment that i do not have ,i simply figured a way to fit the gas lines to the head ,this is not something you can just go and build from parts you find ,you need to have the mixing head that i already had from another kit
wait are you saying that the video quality setting is whatever i place it at before you change it? but how can 144p be better? that is the lowest setting
You can blow up your place in worst possible way with that little thingy ( it's not about the torch itself but the oxygen cylinder driving it )... I hope you're still safe after making this thing
@@ARCSTREAMS i mean an unsafe torch in oxy-fuel welding can cause disaster ( like flash back), if it was a simple gas torch then there wouldn't be a real danger but when it comes to oxy-fuel i recommend using a complete standard kit
@@stabbymcstabstab5777 its impossible for me to tell you what components you will need because they are a bunch of fittings and hoses and a few other parts to make the torch some of which came from a kit plus the gas cylinders ,not something you can juts find ,i juts happen to have the stuff around by luck
there are pieces such as the mixer head and the needle torch that are part of a kit,,not sure these are things than can be put together from any parts you find,,but the rest is pretty much self explanatory,,you have an oxygen tank and a mapp tank with hoses and fittings ,valves and the hoses are attached to the torch
@@tech4682 did you not see my comment above? its not possible for me to give tutorial because the parts im using are not something you can find anywhere and put together
@@kudapadi5429 i am not sure what it was originally for,the kit was made in france and has a mixer head that allows two gases to go inside and mix ,idk what these gases are suppose to be i assume one of them is butane because its a miniature torch set and most of those use butane gas and perhaps the other for oxygen but this is unusual setup for these mini torches since most of them use a combination of butane and air so maybe this one is for a jewelry type torch which uses oxygen ,it also came with 7 different needle size tips that attach to the mixer
Please make a video on how you make it please
Hopeless demonstration.nothing understud.fulish teacher.
@@subhashpatole5050 I can say the same about your writing ,go back to school and learn proper english sentencing
@@ARCSTREAMS he writes worse than a blind person
@@carloslazarocorral410 :)
@@ARCSTREAMS but still could you help please? Iam trying to build a flame thrower
Like a boss 👍👍😁,,, really thats 1 hell good torch,, been watching a lot, but seriously u got me 😉
thank you very much,,yeah most vids on this are fake click bait thumb nails with very weak flames not worth piss but this is the real deal
I will much appreciate if u show the video of the making.. pleaseeeee..
Funny I thought you would need some fancy ox-propane mix for it to cut but I made mine using ambian air and it uses a very thin pen tip for the nozzle and cuts metal pretty easily and uses just regular propane
made? how about a vid demo of it to see what you are talking about , i doubt you can cut metal with propane/air ,,not hot enough and no such thing on the market either , maybe you melted tin or aluminum
it does not cut thick metal it cuts wire
@@skankhunt4283 well more like burn perhaps ,still like to see it, must be hair thin wire
Ima try my hand at making your torch
@@skankhunt4283 you need oxygen supply
that aint no blow torch thats a mini lightsaber
exactly what i thought too 👍
Safety is the last priority 👌
i like living dangerously
Literally
Who needs safety when there’s so much danger and fun to be had?
@@ARCSTREAMS good answer - I have found though that those 'spray paint' can type fire extinguishes are built to last and are worth having ($10) - the 'normal' fire extinguishers seem to leak - I don't like flames inside any more and I was lucky many years indoors
@@TotalFreedomTTT-pk9st had no idea such thing existed, you find those at any hardware store or what
Hey bud I've got one of those old radio shack torch with butane and co2. Anyway i could rig up the old butane tank since they don't make them anymore?
i am familiar with the small butane torches and had one long time ago but not sure where you getting co2 from? i don't think co2 is used in any of them as it is just an inert non flammable gas, not sure what you were asking with your last paragraph?
That’s pretty fkn cool!!
obi wan Kenobi's been real quite ever since this dropped 💀
lol you mean quiet?
How Made it?
Hi. Its beautyfull
Can you show us how did you do it?
many ppl ask me already and the answer is no because some of the parts came from a small torch kit (ie the gas mixer body and the jet flame needles) so aside from the needle or flame nozzle i do not know if you can make the gas mixer part from parts you find , all i did was figure a way to attach small hoses to it with some fittings and the hoses are for propane canister and oxygen cylinder with separate valves and fittings , i have so many ppl asking me how i did it,, perhaps i can make another video to show the parts so it is self explanatory and ppl stop asking me how to di it lol
Tutorial pls
1:30 what you did there is something called fusing, or turning metal into something else, try using it on copper and lead to get silver or gold if the temp is right
fuse/melt copper and lead to get silver (try small piece)
1:30 was burning or cutting the metal not fusing , fusing means to weld and i am not able to weld with propane gas because it creates oxidation porosity and the metal is very brittle and breaks apart easily, besides fusing does not change the metal into something else, idk where you are getting this from? and silver is not made from copper and lead ,silver like gold is pure metal not alloy nor can you create gold lol you watch too many movies
@@ARCSTREAMS It's funny how you see it lol I can't say I blame you, I was thinking the same thing, it's hard to believe.
And yes, fusing means to weld. Welding/fusing and fission atoms to change their properties or turn them into new elements is not a new concept, scientists have done it before, look up "synthesis of precious metals" and "lead to gold." Their argument is that it costs more to produce gold than it is worth (They never said it is impossible).
Lowering the temperature is one method, electrolysis is another, and dissolving the metal in acid is yet another.
Metal oxidation can be easily avoided or turned into other salts to lower the melting point (depends on the salt you used).
In any case, if you decide to melt copper and lead, avoid breathing lead vapor (Also, ensure that the lead and copper are as pure as possible. ).
@@kamelsamer5768 fission is not the same as fusion, fusion does not create new element(ie monoatomic like gold ) it may create alloy, as for lead to gold i dont think anyone achieved that yet nor have i ever heard of scientists or anyone actually creating gold even if it costs more than its worth they have not proved it possible to my knowledge but it is alchemist dream ,(lower temp,electrolysis,acid) explain how any of those methods you mentioned can create gold? as for welding with propane it is not possible even if you mean using flux when you say use salts because the oxidation is not just from the atmosphere it happens internally in the fusion with propane ,something to do with redux otherwise explain how to weld metal with my oxy/propane torch id love to know and finally why would i melt copper and lead? what will this do other than make a machinable grade of copper?
@@ARCSTREAMS
Fission is not the same as fusion, but fusion of two or more elements can result in atomic fission, which can shift the atom's position to the nearest stable element, transforming it into another or several elements (The outcome is affected by temperature, pressure, energy, and the elements used etc...)
Hydrogen, for example, has the atomic number one and the symbol H, H+H = He (helium) + energy, helium has the atomic number two, so 1 + 1 = 2 + energy.
I hope this clarifies things for you.
How to make ??
0:50 it a lightsaber starwar
exactly what i thought when i first lit it
You sound like a 7 year old kid who found this video and said it was light saber it's a gas torch no light saber
@@rcstuff7718 brother you sounded like the 7 year old to be honest, I didn't think it look like one till I read the comment🤷🏾
@@unclebeug I'm 14, but come on that's just a little gas torch, but it maybe looks a bit like a lightsaber I guess
It's only 4000 degrees that lil guy
That’s nice man been trying to make one
i just happen to have the right parts so i put it together
... and those parts were.....?
@@neepsmcfly4176 oxygen cylinder with pressure guage,propane tank,hoses,fittings with valve,mixer torch body and nozzle ,,have fun
ive done something similar only difference is i use an oxygen concentrator
yeah my dad did that too with his medical oxy generator ,seemed to work pretty well but very low psi and not very adjustable,, i use a 60cuf oxy cyl , btw i also made my own thermic lance rig which i also use the oxy cyl for ,love oxygen for many uses,, i should one day make a video of it, it was very fun burning holes right through a brick , steel plates , tungsten and even can be used underwater
@ARCSTREAMS
Sorry for bothering you again, but I've actually found a way to make flash copper using electrolysis to make sodium cuprate.
Meaning you can now plate aluminium perhaps.
idk what sodium cuprate is ,,ifyou found an easy way and it works to plate any metals without pre strike then great,let me know how it goes and how to do it
@@ARCSTREAMS Yeah, I'll let you know.
Basically, about sodium cuprate, that's the only known(public) way to make copper dissolve in an NaOH solution using the electrochemical method.
Making it chemically is protected by trade secrets, so trying to make it chemically is almost impossible.
However, I actually managed to make sodium cuprate as I've mentioned before.
Other than cleaning and preparing the surface, yes, flash copper is the only way to plate something like aluminium or stainless steel.
And yes, again, I'll let you know.
It's strange nobody's tried it before on UA-cam or elsewhere though. I wonder why, especially since flash copper is so expensive.
@@neutronpcxt372 NaOH what was the OH again? its been a while,some kind of acid i guess,,yeah you need to try and see if it works before you wonder why no one else has it on yt ,perhaps it wont work
@@ARCSTREAMS NaOH is a base. Sodium hydroxide.
Can easily be acquired from soap making shops.
Actually, the reason I've discovered most people don't plate with flash copper is that not only is the solution difficult to make(since it requires specific ratios to work), but because it can't be easily with most power supplies since you need high current and low voltage.
Too high voltage = only copper oxide.
Too low current = Ultra slow.
I'll post some pictures of the progress I've made in a few minutes.
@@ARCSTREAMS Here is the picture with everything I've managed to make:
i.postimg.cc/B68z6MDS/IMG-20190407-150106.jpg
Zincate solution, flash copper, deanodized aluminium flashlights, and the like.
Pretty cool
How
Holy ducking moly, that's hot.
Is it acetylene and oxygen or hydrogen and oxygen?
What are you running it off, bigger bottles or something else?
its in the description ,using propane or mapp pro gas with oxygen from a 60CF bottle
This Equipmen gas torch and oxigen?
propane or mappro and oxygen yes
can i use air instead of oxygen
not in this particular case it will not work ,if you want to use air you need a special torch head which combines the gas(propane) with the right amount of air from the atmosphere ,it is completely different torch head and size and the flame temperature is lower ,you can still find such device for sale in hardware stores if that is what you looking for
Muito legal qual combustível que vc usa?
thank you,,it's in the description, i used oxygen and propane or mappro
👍🤜🤛
@@totyantunes1401 give it a thumbs up to the video too please
@@ARCSTREAMS já deixei o joinha amigo
@@totyantunes1401 gracias
Bare handed..plastic keyboard.. open papers.. wood table top.. and a mini home. made gas / jet / welding torch... why not have fun😅
yes me brew
Macguiver.. gimme a dog whistle, insulin needle, duct tape and a paperclip.. boom, working diesel engine..
lol
Without oxygen return regulator, is a tic tac dangerous device.
what is oxygen return regulator? i think you are confusing a regulator with a flashback arrestor, the oxygen line has a flashback arrestor ,the small propane tank does not because its a different hose and they dont come with those ,,i had a few flash backs into the line but they are very small and dont travel that far and rarely happen if you know how to operate it ,but it takes about 50% OXY/FUEL ratio to blow anything up i think and that wont happen ,,do you suggest i insert some stainless steel wool into the hose for the propane line?
Would be nice if you would verbally explain how to make it
these are not parts you can just go and get ,i just happen to find some of them and i had the gas tanks (oxygen and propane) and the torch itself is a mixer head and needle(s) for different size flames that came from an old jewler kit my dad had ,i just got lucky i was able to jerry rig the parts together with some gas lines hooked to the tanks,,its pretty basic stuff,,i cant tell you how to glue things together or find the right fittings etc besides its not like most ppl can juts go and buy a 60cuf oxy tank with regulator just for this small project,,,video is not a how to
could you do the same with hydrogen?
you mean hydrogen and oxygen?
@@ARCSTREAMS yes
or just hydrogen/air
@@VerbenaIDK perhaps,not sure, but i know those torches for hydrogen/oxy or air do exist
@@ARCSTREAMS yeah, only problem is that they wre always hho, they dont separate oxygen and hydrogen
@@VerbenaIDK yes the ones you see here on yt are hho generators which is hydrogen created from electrolysys of water so it becomes a mix of 2 hydrogen atoms and one oxygen atom (if i recal correctly) but there are welding/cutting torches that use separate hydrogen and oxygen ,i think they use them underwater but you will have hard time doing a search on it because the only thing that comes up is hho or hydrogen generators ,you would have to use words like "hydrogen gas cylinder for welding and cutting" ,here is a link i found speaking about it
www.linde-gas.com/en/products_and_supply/gases_fuel/hydrogen.html
i wish they sold hydrogen canisters like they do propane or mapp gas at hardware stores that way i am able to use my mini torch for welding ,maybe in the future they might,,why are you interested in this?
mini blow torch no mini nuke
very cool...
ahh you checked me out , lol thx
Pretty cool, but without construction deets yer just showin off. : )
yup im just showing off as i think its cool to share plus i never said this was a do it yourself vid , as i already explained numerous times in the comments this is not something i can tell you to go get parts for, i simply happened to have them and put it together ,the important part is the torch mixer head which is not something i made but it happens to be part of an old kit i had
“Commendable effort sir”. Good you did not say “ now put your gas mask on, we are going to light up a cigarette ! “
not sure who you are quoting or maybe you just praising my efforts in quotation marks for some reason? thx for watching
Sir, I am praising your technical effort at the same time making a comment on general You tubers who are most of the time over concerned about health.
@@irfanashraf1238 yes its the cotton candy generation lol
How you made it
with my hands
How do you get blue managment flame
@@anujasilva1666 oxygen,,,read description
@@ARCSTREAMS thank you
@@anujasilva1666 welcome
is that an easter egg dipper?
huh? ohh you mean about that circular wire lol ,nah just a steel wire i was heating ,fusing and bending with the torch
@@ARCSTREAMS it looked like the ones we used back in the day. televisions with 13 station identifications, that went to sleep at midnight, playing the star spangled banner, every night. those days. cool torch by the way. if only you could get an aerosol can cut in half and put in some diatomaceous earth, then weld it, and put some acetylene in it. that'd melt copper and gold.
@@buckwheat7424 no idea what that can thing you mentioned is about or what is diatomaceous earth
@@buckwheat7424 it be easier to buy an acetylene tank than build one but i can melt gold and copper with this no problem,i dont need acetylene unless i want to weld instead of braze
It is now ;)
he can melt gold?
who is "he"?
@@ARCSTREAMS "He" is me and yes I can melt gold as well as butter & ice cream. Have a good day !
No its a she.
Damn transvestites everywhere now..
Teach me how to make the blowtorch though
i can't
@@ARCSTREAMS why not? It would be an interesting tutorial. It would probably earn my subscription too
because the torch i put together has parts that came from a minature set and not something i built myself,the only thing i did was figure a way to make it fit gas lines to an oxy cyl and a propane cyl ,so you would have to buy an oxygen tank and regulator with hose and a small propane cyl with small hose and fittings,,quite costly and not exactly something i can explain in a tutorial
@@ARCSTREAMS oh ok. Well if you can find a way to make it after taking a quick trip to your hardware store then let me know because that would be a video I would be interested in
i doubt you can find the right parts in a hardware store to make something this small ,they are custom made pieces,,anyways if you are looking for a small torch set i am sure you can buy one
Would you like to sell this to me
why do you live right around the corner?
@@dipanshudangwal5127 lol umm no sorry not for sale
Damn
lol even your poster pic looks like its saying damn ,,,you like that huh
You should make a video disassembling it and reassembling it. This video is completely useless.
this is not a "how to" video and besides it is simply just a bunch of gas lines and fittings that go into mixing torch head ,i did not make the head it is from old jewler torch kit made for seperate torch attachment that i do not have ,i simply figured a way to fit the gas lines to the head ,this is not something you can just go and build from parts you find ,you need to have the mixing head that i already had from another kit
show off
indeed
144p is better
wait are you saying that the video quality setting is whatever i place it at before you change it? but how can 144p be better? that is the lowest setting
My fault, i had it to 144p 😄
@@slowmosounds8947 i still did not understand you initial comment
@@ARCSTREAMS don't worry nothing wrong, the video is just fine, I had set the resolution low... lol
@@slowmosounds8947 ok i was just wondering if you were being sarcastic with your initial comment
52🔔🤝👍🌹👈 OK
huh?
You can blow up your place in worst possible way with that little thingy ( it's not about the torch itself but the oxygen cylinder driving it )... I hope you're still safe after making this thing
many ppl have oxygen cylinders and know how to use them so i dont see you point
@@ARCSTREAMS your torch sir , it's handmade and not a standard one .
@@mehrdadafshari3519 you said its not the torch its the oxygen driving it and now you say its the torch?
@@ARCSTREAMS i mean an unsafe torch in oxy-fuel welding can cause disaster ( like flash back), if it was a simple gas torch then there wouldn't be a real danger but when it comes to oxy-fuel i recommend using a complete standard kit
@@ARCSTREAMS gas cylinders won't blow up on their own but in presence of an oxygen cylinder and an unsafe torch your time bomb will be complete
What was the point of this, How to make would of been amazing.
Im just gonna Light a Cigarette waste peoples time and post this Shhhhhtt up
Itu sih bukan tutorial bikin alatnya....tp pamer alat bro
in english?
ya saya suka pamer, dan siapa bilang itu video tutorial??
মটরবানাবো
???i dont speak gibberish
@@ARCSTREAMS legit ahah, do you have any instructions or what you used
@@stabbymcstabstab5777 nope
@@ARCSTREAMS would you be willing to share what you used?
@@stabbymcstabstab5777 its impossible for me to tell you what components you will need because they are a bunch of fittings and hoses and a few other parts to make the torch some of which came from a kit plus the gas cylinders ,not something you can juts find ,i juts happen to have the stuff around by luck
Not showing how you built! Bof!
never said it was a "how to build" vid
bof?
Hey bud I've got one of those old radio shack torch with butane and co2. Anyway i could rig up the old butane tank since they don't make them anymore?
Tutorial pls
there are pieces such as the mixer head and the needle torch that are part of a kit,,not sure these are things than can be put together from any parts you find,,but the rest is pretty much self explanatory,,you have an oxygen tank and a mapp tank with hoses and fittings ,valves and the hoses are attached to the torch
@@ARCSTREAMS we need tutorialll
@@tech4682 did you not see my comment above? its not possible for me to give tutorial because the parts im using are not something you can find anywhere and put together
is it all originally from oxy torch equipment?
@@kudapadi5429 i am not sure what it was originally for,the kit was made in france and has a mixer head that allows two gases to go inside and mix ,idk what these gases are suppose to be i assume one of them is butane because its a miniature torch set and most of those use butane gas and perhaps the other for oxygen but this is unusual setup for these mini torches since most of them use a combination of butane and air so maybe this one is for a jewelry type torch which uses oxygen ,it also came with 7 different needle size tips that attach to the mixer