Handmade a Small Gas Jet Cutter DIY Part 1

Handmade Small Gas Jet Improvement Part 2: • Handmade Small Gas Bur...
I needed a small gas burner for the thermomagnetic engine project (based on the Curie point). I thought that this simple construction might be of interest to you.
To implement this project, the following products were used: a medical dropper, a broken telescopic antenna and the cheapest Chinese gas burner.
That's what the burner looks like when it's assembled.
To show the gas burner in operation, I made a small device, which I will describe in one of the following video clips. I hope you can guess how you can use this gadget.
Related article: oldoctober.com/...

[@WIZ56575]

I wanted to make something similar to this but don't know how long this can burn without melting Other parts below the metal do you happen to know.

[@IurisWorkshop]

This is the first not very successful experience. Better make a burner like this: ua-cam.com/video/rGU_V3VLkeg/v-deo.html

[@WIZ56575]

@@IurisWorkshop Thank you so much I did watch the video loved it.

[@kyriesantos1962]

👍👍👍👍👍👍👍👍

[@soro1955]

а чем не понравилась старая горелка?

[@IurisWorkshop]

Большая слишком. Размер ротора двигателя, для которого она делалась, где-то около 100мм.

[@IndraKumar-di9bp]

What is can name

[@ishitagupta4527]

It is not home made

[@wancable9702]

yellow flame, not enough oxygen or poor jet.

[@ishitagupta4527]

Very cheap

[@cmotruc]

Антенну жалко