Відео

i am familiar with the small butane torches and had one long time ago but not sure where you getting co2 from? i don't think co2 is used in any of them as it is just an inert non flammable gas, not sure what you were asking with your last paragraph?

is that humor?

lol you mean quiet?

thx appreciate it, hope it is useful for you, pls give vid a thumbs up

what are those

thank you its a nice idea but i need the wires inside the tubing to be able to freely move because it's a folding design and really no need to water proof but its already water proof anyways specially if you use stainless steel wire

do you really think i missed somthing so simple as you suggest? no these 3 legged stands are not stable or sturdy enough for use with pans no matter what way i position them , with my stand im able to use small or larger pans and there easy to make to fit your design needs

thanks, check out my other vids on diy light in the dark floaters etc

of course ,your mind always in the gutter 🤮

lol u checkin me out huh ,yeah i love fishing and cooking and specially eating haaa, my accent? did not know i had one lol ok yes i guess i do thx

yeah give it a try ,i might have to make another vid describing this float in more detail because i had to make some minor adjustments to to the design from experience using it on the water , be sure to look at my other ch vids as well as i got a few more on it and fishing etc,, btw your name and poster pic look familiar do we know each other from somewhere? perhaps on a stream yard we be go on i may have seen you there?

@@ARCSTREAMS ua-cam.com/video/xT7Q7KLhchU/v-deo.html

That's me

@@mikeydesilva8197 ohh right eight lol ok cool and thx for checking out my ch too

@@mikeydesilva8197 yeah man i been thinking of hitting that small pond again but i never seen the big boys there, are they not suppose to be there all season? as i said only caught small one in the summer exactly where you are in the vid but more towards the back shallow area ,tried the spot on the rocky point too but nothing, was thinking of going there now but not sure anything will bite or what i should be using for bait and rig setup ,is that pond part of a sewage system though? im a try there and at professors lake even though it might be too late in the season but since the weather has still been warm i might get lucky, like to fish there then go to work afterwards as i work the afternoon shift south of the area

ohh hey it's the singer from last time wasup, how come you checking my ch out? and what do you mean by artificial fishing?

never said it was a "how to build" vid

bof?

fuse/melt copper and lead to get silver (try small piece)

1:30 was burning or cutting the metal not fusing , fusing means to weld and i am not able to weld with propane gas because it creates oxidation porosity and the metal is very brittle and breaks apart easily, besides fusing does not change the metal into something else, idk where you are getting this from? and silver is not made from copper and lead ,silver like gold is pure metal not alloy nor can you create gold lol you watch too many movies

​@@ARCSTREAMS It's funny how you see it lol I can't say I blame you, I was thinking the same thing, it's hard to believe. And yes, fusing means to weld. Welding/fusing and fission atoms to change their properties or turn them into new elements is not a new concept, scientists have done it before, look up "synthesis of precious metals" and "lead to gold." Their argument is that it costs more to produce gold than it is worth (They never said it is impossible). Lowering the temperature is one method, electrolysis is another, and dissolving the metal in acid is yet another. Metal oxidation can be easily avoided or turned into other salts to lower the melting point (depends on the salt you used). In any case, if you decide to melt copper and lead, avoid breathing lead vapor (Also, ensure that the lead and copper are as pure as possible. ).

@@kamelsamer5768 fission is not the same as fusion, fusion does not create new element(ie monoatomic like gold ) it may create alloy, as for lead to gold i dont think anyone achieved that yet nor have i ever heard of scientists or anyone actually creating gold even if it costs more than its worth they have not proved it possible to my knowledge but it is alchemist dream ,(lower temp,electrolysis,acid) explain how any of those methods you mentioned can create gold? as for welding with propane it is not possible even if you mean using flux when you say use salts because the oxidation is not just from the atmosphere it happens internally in the fusion with propane ,something to do with redux otherwise explain how to weld metal with my oxy/propane torch id love to know and finally why would i melt copper and lead? what will this do other than make a machinable grade of copper?

@@ARCSTREAMS Fission is not the same as fusion, but fusion of two or more elements can result in atomic fission, which can shift the atom's position to the nearest stable element, transforming it into another or several elements (The outcome is affected by temperature, pressure, energy, and the elements used etc...) Hydrogen, for example, has the atomic number one and the symbol H, H+H = He (helium) + energy, helium has the atomic number two, so 1 + 1 = 2 + energy. I hope this clarifies things for you.

i always fished with bobbers more so than i ever bottom fished, depends on situation but i like staying away from snags or having to tightly hold the rod all the time

@@ARCSTREAMS OK welderboy, you keep watching your BBC propaganda, keep being an anti semitic with your Neo Nazi outlook, keep defending racists and honour killers, it's all good, it's your right to be like that, it's just not a good

glad my ideas help you out , not sure i understood your pvc thingy ,you want your noodles or pvc jugs to glow on top of the water is that it? anyways i know you dont use bobbers but check out my other vids if you still interested to see the latest one i made and for other fishing techniques, btw what you fishing for catfish?

glow sticks are waste of time and money, leds are the way to go if you want something that lasts

@@ARCSTREAMS - That’s it. I want my noodles to glow on top of the water. Also I am fishing for catfish. The water is anywhere from 6 to 12 feet deep. When I fish with bobbers I tend to catch channel cats. When I fish off the bottom I tend to catch blue cats.

@@boxelder9167 ok cool, yeah im sure there are many kind of designs you can do with led's to make your noodles/jugs etc visible

@@ARCSTREAMS - I think that I may just make and attach some of your lighted bobbers to the hook line on the noodles. That should make a decent strike indicator too. Maybe even stick some shot in a tube and have it stand up during a strike so the shot rolls down and keeps it standing. That way I know if I should check it.

thank you I appreciate that

@@ARCSTREAMS OK welderboy, you keep watching your BBC propaganda, keep being an anti semitic with your Neo Nazi outlook, keep defending racists and honour killers, it's all good, it's your right to be like that, it's just not a good

@@havoc6_1_6 lmao bbc is pro zioisrael and i never watch bbc or cnn or any of the western msm alphabet soup networks and i can't possibly be anti semite since i happen to be middle eastern , do not confuse anti fake apartheid israhell for anti jew ,that trick of hiding behind the jewish name by the zionist so called jews of europe in israhell no longer flies on ppl with critical thinking

exactly what i thought too 👍

made? how about a vid demo of it to see what you are talking about , i doubt you can cut metal with propane/air ,,not hot enough and no such thing on the market either , maybe you melted tin or aluminum

it does not cut thick metal it cuts wire

@@skankhunt4283 well more like burn perhaps ,still like to see it, must be hair thin wire

Ima try my hand at making your torch

@@skankhunt4283 you need oxygen supply

many ppl ask me already and the answer is no because some of the parts came from a small torch kit (ie the gas mixer body and the jet flame needles) so aside from the needle or flame nozzle i do not know if you can make the gas mixer part from parts you find , all i did was figure a way to attach small hoses to it with some fittings and the hoses are for propane canister and oxygen cylinder with separate valves and fittings , i have so many ppl asking me how i did it,, perhaps i can make another video to show the parts so it is self explanatory and ppl stop asking me how to di it lol

you mean hydrogen and oxygen?

@@ARCSTREAMS yes or just hydrogen/air

@@VerbenaIDK perhaps,not sure, but i know those torches for hydrogen/oxy or air do exist

@@ARCSTREAMS yeah, only problem is that they wre always hho, they dont separate oxygen and hydrogen

@@VerbenaIDK yes the ones you see here on yt are hho generators which is hydrogen created from electrolysys of water so it becomes a mix of 2 hydrogen atoms and one oxygen atom (if i recal correctly) but there are welding/cutting torches that use separate hydrogen and oxygen ,i think they use them underwater but you will have hard time doing a search on it because the only thing that comes up is hho or hydrogen generators ,you would have to use words like "hydrogen gas cylinder for welding and cutting" ,here is a link i found speaking about it www.linde-gas.com/en/products_and_supply/gases_fuel/hydrogen.html i wish they sold hydrogen canisters like they do propane or mapp gas at hardware stores that way i am able to use my mini torch for welding ,maybe in the future they might,,why are you interested in this?

i designed this with catfish in mind because i go night fishing for them but i had success using them on pan fish as well ,some pull it down some make it just lightly bob up n down still indicating a strike ,it might look too buoyant but it works well enough specially if you got the right weight on the line then there is little resistance and it is quite water tight,,have not had any problem after many uses, i have tweaked the design and so far so good ,thx for checking it out but have a look at the other vids ,even my last one shows the latest's designed bobber,,also instead of large kindergarden eggs you can find smaller one if you want less boyance and more sensitivity for smaller tackle but the main design and idea still applies

ok so?

@@ARCSTREAMS sorry, all I meant was maybe youd be interested in some.

@@user-by6yc8yl7v try ebay or kijiji etc

not in this particular case it will not work ,if you want to use air you need a special torch head which combines the gas(propane) with the right amount of air from the atmosphere ,it is completely different torch head and size and the flame temperature is lower ,you can still find such device for sale in hardware stores if that is what you looking for

thank you,,it's in the description, i used oxygen and propane or mappro

👍🤜🤛

@@totyantunes1401 give it a thumbs up to the video too please

@@ARCSTREAMS já deixei o joinha amigo

@@totyantunes1401 gracias

much appreciated, be sure to look at my other vids there and upcoming one

yup im just showing off as i think its cool to share plus i never said this was a do it yourself vid , as i already explained numerous times in the comments this is not something i can tell you to go get parts for, i simply happened to have them and put it together ,the important part is the torch mixer head which is not something i made but it happens to be part of an old kit i had

in english?

ya saya suka pamer, dan siapa bilang itu video tutorial??

this is not a "how to" video and besides it is simply just a bunch of gas lines and fittings that go into mixing torch head ,i did not make the head it is from old jewler torch kit made for seperate torch attachment that i do not have ,i simply figured a way to fit the gas lines to the head ,this is not something you can just go and build from parts you find ,you need to have the mixing head that i already had from another kit

thx check out my other vid on an improved lighted floater design

i removed that one myself, i was having problem posting my comments as they took longer than usual to get posted so i was juts testing to see how long it took after i fixed something ,i had my service provider technician come a few days ago to fix my internet wich was not working and they got me a new modem but i been noticing slow pages and such since , also when i post comments i sometimes get the message "We weren't able to add your reply. Please try again." so i end up copying them and re try again and it works ,but lots of problems like this now for me ,,no worries just try and find the ones that did not get posted and leave them here for me to post again

hmm so my comments are being removed then ,not surprised as yt messes around like that alot for some reason, let me know which comment(s) was removed ,if it's that important for you to have my comments on there then your best option is to copy the ones still in your email and post them to me here and then ill copy n paste them back to your vid post, include your vid link again cause i dont remember what video i was looking at

they seem to have made some format changes to yt also so that might be messing things up, i noticed it takes time for pages to load my comments that i post also to see others comments as i wait for them to load after the video

@@ARCSTREAMS it's not that's it's important as such, I just like to reply to each person to try help of answer the questions. That's the whole point of me doing videos

@@ARCSTREAMS here is the link. There's a chance the link won't appear here for you ua-cam.com/video/zE1rKLhNCpg/v-deo.html

@@C3BFA ok that was the vid i was looking at but i dont have the comments i made that is why i asked you to copy n paste them for me here from your email, you must still have them in your email or in the trash section of your email if you trashed them so go there and retrieve them and put them here and ill re post them to your vid

propane or mappro and oxygen yes

ty

OK welderboy, you keep watching your BBC propaganda, keep being an anti semitic with your Neo Nazi outlook, keep defending racists and honour killers, it's all good, it's your right to be like that, it's just not a good

ty very much and for the sub, look out for a new bobber vid i will put up soon ,im sure you can give night fishing a try

thx

yeah my dad did that too with his medical oxy generator ,seemed to work pretty well but very low psi and not very adjustable,, i use a 60cuf oxy cyl , btw i also made my own thermic lance rig which i also use the oxy cyl for ,love oxygen for many uses,, i should one day make a video of it, it was very fun burning holes right through a brick , steel plates , tungsten and even can be used underwater

many ppl have oxygen cylinders and know how to use them so i dont see you point

@@ARCSTREAMS your torch sir , it's handmade and not a standard one .

@@mehrdadafshari3519 you said its not the torch its the oxygen driving it and now you say its the torch?

@@ARCSTREAMS i mean an unsafe torch in oxy-fuel welding can cause disaster ( like flash back), if it was a simple gas torch then there wouldn't be a real danger but when it comes to oxy-fuel i recommend using a complete standard kit

@@ARCSTREAMS gas cylinders won't blow up on their own but in presence of an oxygen cylinder and an unsafe torch your time bomb will be complete

ahh you checked me out , lol thx

i like living dangerously

Literally

Who needs safety when there’s so much danger and fun to be had?

@@ARCSTREAMS good answer - I have found though that those 'spray paint' can type fire extinguishes are built to last and are worth having ($10) - the 'normal' fire extinguishers seem to leak - I don't like flames inside any more and I was lucky many years indoors

@@TotalFreedomTTT-pk9st had no idea such thing existed, you find those at any hardware store or what

i have looked online at many other vids on this and the so called diy small torches were mickey mouse compared to what i built here,,,there was no goal other than to simply show something i built i was happy about and thought it would be cool to show around ,,not every video needs to be a how to or diy ,,in fact i seen many show off vids ,,but if you bothered to read some of my replies to others who asked me how to make it or why i do not have instructions you will see my explanation on why its not possible and very difficult to find certain parts i am using most of which were things i had by luck and not something you can find anywhere and its very costly on some parts ,.i did not intend to make this ,i just happen to have these things so i put it together for this function ,other than that its just common sense design of nothing more than using the right gases ,fittings and lines to a small mixing chamber and nozzle ,,now are you that much bothered by it?would you prefer not to have seen this video that most ppl enjoyed? well excuse me for upsetting you

" cheap mini torch" lmao ,i can assure you nothing about this is cheap,,and let me see if you ever made a small torch with this much working power to it ,id be happy to see your vid,,,ooops no you only seem to have a couple of useless cartoon vids that make no sense to me yet you bashing my creativity? please go away i got no more time for kiddy trolls

@@ARCSTREAMS dude, you're pathetic. maybe you shouldn't take such offence to comments about your videos. i am entitieled to my opinion, but you write diatribes like a loser who has nothing but time on his hands.

I don't understand why you took the time to look at my channel just because I commented on your video. You are such an a hypocrite. I guess you spent some money on that crappy torch, based on your defensive reaction, but I just can't understand why you would purchase something like that and show it off and say nothing about what it is. So pointless. I just don't understand your goal in posting this video.

@@geeperscreepers1149 lmao took you all that time to come back here and this was the best you could come up with? talk about being a hypocrite and a troller