a smart way to make a quick a small and sharp torch in a survival situation, with easy martials to get 😊then you can always improve it when you come to better materials
This gentleman MUST be Russian. If not, I apologise. Although it is very interesting, I have concerns over its safety. Commercial torches have flashback arrestors, which do not allow the flame to travel down the tube and into the gas bottle. I did not see such a device on this. If I have missed seeing such a device on this tool, then I must apologise once again. If it is safe then it will be most useful to jewellers so that they can "weld" jump rings, such that closed link chains can be made. Please carry on making these "unusual" items, stay safe so that we can enjoy your work for many years. 👍
Flashback arresters are normally only used where there is an oxygen supply, as there is no oxygen supply that’s why he did not fit one. But considering a jewellers butane torch can be bought for about $40 I would buy one of those and know I was safe.
I feel like a hose clamp instead of glue, would make this contraption easier to attach to the next can of gas. Just spit ballin, not complaining. It's still cool either way.
Creative and handy, but there are ready made long nosed flame gadgets available without hustle and risk of bursting fire. In fact, there are so many propane attachments and bits available online that could make a fantastic yet safe project like a breeze. All in all, great job for something to demonstrate as doable.
It's creative but looks very sketchy. If you want a good small welding torch, buy a Smith's Little torch and get oxygen acetelene tanks and you can have a torch that produces a 6,000 degree flame and allow you to weld safely and efficiently.
I tried it making when I was 15 but I was making burner also but failed due to making smaller holes to pass the gas hole was 0.70mm so gas coming out was not so brilliant, today when I saw it it reminded me of my memories.... Great job but still needs more improvement.... It's not the rugged one....
Great job. The flame shape is satisfying. I hope you make another video with the same torch but in a way to make the gas cane easy to be changed. I'm pretty sure you know what to do.
Just make adapter using the top from the gas can doesn't really need to be adjusted so just set it to when ya put top on and if it falls over the top pops off safety cut out
I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid. You can still use the concept of a clamping device, to compress the Butane but I would hook it up to a BBq's propane tank, it will last way longer and you don't have to worry about bumping it around. Also look into a damping system in case of blow out, the flame gets sucked back into the line igniting the gas blowing up the canister.
Seems like a neat fun project. Don't know if you have limited access to tools or what but here in the states they make small butane torches for as low as 5 bucks. As others said PLEASE be careful... a tip over COULD go very bad.. not saying it will... just saying. Neat little project though!
By the way you can combine the butane with nitrous oxide. The resulting flame is 3000+ degree f. And its super clean .... well i use butane with near zero impurities. The whipit brand in the white can.
😂 лёгких путей не ищем 😂а не проще взять пропановую горелку обрезать у неё сопло а оставшуюся трубку натянуть шланг и она будет регулироваться за счёт вентиля подача газа а не как у вас палками и щепками 😂
Acho que não precisa de anti- retorno de chama. Não existe oxigênio sob pressão. O oxigênio é do ar que é arrastado pelo fluxo de gás. Se não tiver fluxo de gás, não tem arraste de oxigênio. I arraste só ocorre de dentro para fora. Quando a pressão dentro da garrafa cair a ponto de igualar a atmosférica, o fluxo parará e o ar parará de ser arrastado. Nunca haverá inversão de fluxo.
Excellent video ! 👍
nice! work thanks for sharing...😊
A home made bomb to be sure
🤣🤣
@@moking8095 no bomb without oxygen involved in right mix inside the gas bottle. Learn some chemistry and physics before becoming a "wise".
@@elfillari &ot'em!
Creative is very handy with his hands it must be said - well done fella
Thanks for your new idea and tactic nice talent , Norman Wray 😅
Ah y d wow na wow😂😅
Awesome diy continue
کارت عالی بود مرد.خیلی دوست داشتم
Amazing! Changing the gas canister must be fun😅
😂😂
Excellent. Thanks for sharing.
Thanks for sharing 👋👍
Well Done....
Great idea, thanks for the video.
Excellent tutorial...
سلام..دستت درست استاد🎉🎉🎉
Indeed a handy little tool, a longer tube mabe, nice vid
Nice bro
Great Idea sir
I love it. Greettings from Argentina.
Merci j'aime votre technicité c'est genial
Thanks for sharing!
Good idea
😮👏👏👏👏👏👏💯 you so cool 🎉
Nice idea
👍👍👍 Bellissimo ,bravo
Amazing work brother
Tweakers Dream Toy
aw mate this is awesome thanks for showing me how i can blow myself up but seriously i am quite surprised by this lokks hot enough anyway
This is gold! Thank you Creative! You just helped out so many people getting started on their projects.
That's cool, and for all of the effort, you get about 10 minutes of burn time, LOL !
Lebih irit gas untuk pematrian logam 👍👍👍👍👍
فوقالعاده بود🎉🎉🎉
Awesome 👍🏻
well done😊
a smart way to make a quick a small and sharp torch in a survival situation, with easy martials to get 😊then you can always improve it when you come to better materials
Nice and excellent
very good very nice
واقعاً عالی لذت بردم ❤❤❤❤
درود بر شما. به به به این هنر ظرافت واقعا عالی بود. ❤❤❤
I will stick with my mini torch...it does the same thing. But, this is pretty cool.
I feel like I'm on a list after watching this
Awesome! Wanted to make one of these for a while
Когда есть такая в арсенале - это неплохо👍
Great Job. Cool! 👍👍
This gentleman MUST be Russian. If not, I apologise. Although it is very interesting, I have concerns over its safety. Commercial torches have flashback arrestors, which do not allow the flame to travel down the tube and into the gas bottle. I did not see such a device on this. If I have missed seeing such a device on this tool, then I must apologise once again. If it is safe then it will be most useful to jewellers so that they can "weld" jump rings, such that closed link chains can be made. Please carry on making these "unusual" items, stay safe so that we can enjoy your work for many years. 👍
Гасители обратного воспламенения ставятся на водородные горелки, пропан в трубке не воспламеняется
Был бы русский, то болт и спицу приварил бы к баллону 😁
Nobody cares what you have to say
He's Russian,Nicaraguan or Cuban.
Flashback arresters are normally only used where there is an oxygen supply, as there is no oxygen supply that’s why he did not fit one. But considering a jewellers butane torch can be bought for about $40 I would buy one of those and know I was safe.
It's a cool little device. Should be able to slice right through brake discs with that champ right there. 😄
Good Job ! 🤩👌💪Not like a most clickbaits with patents that don't work . Greetings From Poland ✋👊
I feel like a hose clamp instead of glue, would make this contraption easier to attach to the next can of gas. Just spit ballin, not complaining. It's still cool either way.
Good Idea, you Can welding, braze a copper tube for a occasional use. A welding station oxy-acethylène cost 1000€
It looks very good, can this flame be good enough for brazing ?
Really appreciate your ideas
Very interesting
That is an excellent idea. Thank you for sharing.
Very nice
سلام احسن ابداع
Creative and handy, but there are ready made long nosed flame gadgets available without hustle and risk of bursting fire. In fact, there are so many propane attachments and bits available online that could make a fantastic yet safe project like a breeze. All in all, great job for something to demonstrate as doable.
Fun 😊
Someone buy this man a drill press.....he'd be unstoppable
Cool😮
It's creative but looks very sketchy. If you want a good small welding torch, buy a Smith's Little torch and get oxygen acetelene tanks and you can have a torch that produces a 6,000 degree flame and allow you to weld safely and efficiently.
Looka lika meth smokaz dream torch!!
👍🏻👌🏻👏🏻👏🏻😃❕ G-G.
I tried it making when I was 15 but I was making burner also but failed due to making smaller holes to pass the gas hole was 0.70mm so gas coming out was not so brilliant, today when I saw it it reminded me of my memories....
Great job but still needs more improvement....
It's not the rugged one....
The scientific world is in shock!!!
😂🙏
@@creative4979 :)
I'm really impressed by this build, great stuff. You're super smart.
Great job. The flame shape is satisfying.
I hope you make another video with the same torch but in a way to make the gas cane easy to be changed.
I'm pretty sure you know what to do.
Just make adapter using the top from the gas can doesn't really need to be adjusted so just set it to when ya put top on and if it falls over the top pops off safety cut out
Use stud iron and nuts to extend over the height of the can, on a wooden base. This would replace the bolts glued to the can.
@@عبدللهبنعبدلله-ن8و behave its complete lies like all religeous crap no god needs to make a book
I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid.
You can still use the concept of a clamping device, to compress the Butane but I would hook it up to a BBq's propane tank, it will last way longer and you don't have to worry about bumping it around. Also look into a damping system in case of blow out, the flame gets sucked back into the line igniting the gas blowing up the canister.
Thinking quickly, Dave crafted a butane torch from copper tube, wood, glue, and a butane torch!
Indeed. The only benefit here is flexible head & low profile for tight reaches
Ok prfekt👏👏👏👏👏
Espectacular 🎉 súper sencillo una herramienta de gran utilidad gran trabajo 👍🏻👍🏻👍🏻
way cool
Stümperhafte Arbeit
Seems like a neat fun project. Don't know if you have limited access to tools or what but here in the states they make small butane torches for as low as 5 bucks.
As others said PLEASE be careful... a tip over COULD go very bad.. not saying it will... just saying.
Neat little project though!
So creatife and very simple to use the tool
Mr. Kahoy
Excellent!!!
Thank you for sharing!
احسنت فكرة روعة هل هذه الشعلة تصهر النحاس
I had problems with bracelets soldering cause of tiny pieces. Now you solved it, thanks a lot 🙏🏼
good idea but you need a gas bubbbler so no back explosion when gas runs low
@@DeejayGrafixx not gonna happen because the gas bottle is always under more pressure than flame/oxygen flow.
Wrong
12:10 looks dangerous, will it explode?
Finally a way to rid the world of used popsicle sticks and melt solder into little balls...
B 12:41 mount can so its inverted . Just like when filling lighters
By the way you can combine the butane with nitrous oxide. The resulting flame is 3000+ degree f. And its super clean .... well i use butane with near zero impurities. The whipit brand in the white can.
I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid.
👀🌹
👌🎉
良いアイデアと簡単な方法、サポートします
Brilliant
😂 лёгких путей не ищем 😂а не проще взять пропановую горелку обрезать у неё сопло а оставшуюся трубку натянуть шланг и она будет регулироваться за счёт вентиля подача газа а не как у вас палками и щепками 😂
I couldn't help feeling like I was looking over the shoulder of a bomb maker.
браток , это шикарно! Я, с тебя фуею! молодца!!!
Hola gracias
Sangat kreatif sekali..!
The music kept me from wanting to watch the video. Best of luck to your channel.
It’s missing a flash back arrestor, you’ve built yourself a bomb! 🤯💣☠️⚰️
does FUEL burn/explode without oxygen in canister?
@@AT-os6nb it wouldn’t explode/burn without oxygen, but if the flame goes back down the pipe taking oxygen with it then problems will occur
@@paulfrost8952exatly!!
especially with an unstable gas like a can of butane 😅
Acho que não precisa de anti- retorno de chama. Não existe oxigênio sob pressão. O oxigênio é do ar que é arrastado pelo fluxo de gás. Se não tiver fluxo de gás, não tem arraste de oxigênio. I arraste só ocorre de dentro para fora. Quando a pressão dentro da garrafa cair a ponto de igualar a atmosférica, o fluxo parará e o ar parará de ser arrastado. Nunca haverá inversão de fluxo.
На такой баллон есть горелки с цангой и краном. Они не дорогие и их можно использовать в качестве донора.
there is something to be said about using ONE JET LIGHTER, to light another COMPLETELY OVER ENGINEERED jet lighter hahaha I LOVE IT!
❤❤❤
Neat!!
What kind of glue are you using
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Can use it for brazing copper or cannot...
What type of torch tip u r using u didn't say anything about it my friend ?