Absolutely amazing. Flying with GepRC Cinelog25 second week, indoor it flies smoothly but outdoor totally unstable even with almost no wind. As a rookie I don't understand what is wrong - is it settings, drone itself, pilot...
I am so happy I found your channel. I just applied these rates to my Eachine AtomRc Seagull ... And it works so much better now! Super stable. Night and day effect. Thanks for the awesome tips!!!
That's exactly what I was looking for. I have an Eachine Seagull too and I'm super happy with this cinewhoop. The drone arrived recently and I made my first real flight just a few days ago, I uploaded a video on my channel. Can't wait to try these settings !!! Thank you very much
His settings in Actual Rates are 100 690 .83 pitch and roll 80 550 .82 yaw in the converter BF to actual rates My recommendations for Actual Rates Center stick 100, max 500, Expo 0.50 Throttle mid = your throttle % at hover (stick %) and throttle expo 0.20
@@derrymartalova7785 I was saying set your hover point to middle stick and add a .2 expo in your radios settings. But Do not worry about that. it was bad information. Its all personal preference. I hover around 20%-45% thotttle depending on my weight and battery, I fly fine
@@tomaszboril 70% or your stick is 120 degrees per secound and it ramps up to 516 at the last 30% of your stick. That sounds smooth with twitchy end points. but I'll try it on a simulator. It could be the next best thing since sliced bread. I'm flying 200 500 0.5 for a more consistent stick. I'm thinking 100 400 0.2 may be enought for my style of cruising and gopro shots. very smooth 100 middle 20% stick with the other 80% of the stick being consistant 400 degrees per secound.
Hi, Thanks for sharing. The screenshot is a little different from the description... RC expo in the screenshot is 0.2 while in the description it is 0.3. Thanks again
What’s the different between mid throttle and expo throttle in BetaFlight? You use 0,20 in expo but in mid throttle do you use stock BetaFlight 0,50 setting?
hello friend I have a proteck 35 and a proteck 25 I made your tuning, man how the drones were in hand I want to thank you in advance, you helped me a lot thank you very much friend
10 місяців тому
Do you think these rates work well on a Pavo20 with 3s battery?
Why is Protek so snappy in the movement? I tried your settings but it was way to snappy for me. Then I lower all the way down to 200 degree on all three. And its still little bit aggresive to me... I want my cinewoop to be as smooth as possible
I just put the same rates on my tiny go fpv it is wonderful and the house no more hitting walls refrigerator and the doors I love it thank you very much😊😊👍👌
Hey ! Thank for the vidéo, im gonna try the rates with my cinelog 35 ! Do you fly angle mode or acro for cinematic fly indoor ? And what do you thinkj about taking bad habbits by flying in angle mode ? Thanks for your answer !
Stopping in to say, after many runs, the new rates worked like a dream. Moving from a light camera (50g) to a full-sized GoPro8, the drone became very hard to control smoothly. These new rates brought it back to being totally manageable. Thanks!
Hi. I have a big problem with flying this drone indoors. He's still swinging him from side to side and it's hard to control. Do you think another drone would be better for indoor flying? It is important for me that he can carry a full gopro 10
Hi there! If you need a smaller setup I would get the GoPro Bones and use it on a 2,5'' drone, I have the Foxeer Foxwhoop 25 and it's amazing for smaller places. Unfortunately GoPro fullsizes are hard to carry with smaller drones...
I'll give this a go with my protek25.. It's always been too jumpy and not as precise. But since having it, I haven't had a lot of time to get out and fly the last couple years. Fingers crossed as I get back into the hobby. Also, need to now find rates for smoother freestyle with my protek 35
@@griffey11 I haven't been able to try it as it's been a down pour, gale force winds up to 40 mph over the last few days.. It's very close to my rate profile 2, although my RC rates were 1.00, and my Super were 0.70 and my expo was 0.00 and throttle expo was already on 0.20.. I'll give it a go, but just spent 2 days reinstalling all the firmware on my upgrade Mobula6HD and those expo were awful, and I solved this by installing the rates from my Emax Tinyhawk and now it's very smooth. Might see if it works on my protek. RC rates 0.80.. Super 0.60 and Expo 0.60 and the last one is 0.20.
@@griffey11 So I've updated my rates, but only managed to fly inside. I feel the response is smoother when flying slow and steady, it's definitely different to my original rates. I need to take it outdoors to see how it reacts in an open space? I'll add the rates onto my Protek25 as that one is a jumpy quad. I'm usually flying full speed , freestyle and while I'm no expert, trying to aim for gaps has been me half committed and trying to not make a mess in my trousers as it's just so twitchy on the throttle and pitch and roll axis
@@griffey11 I've got an update.. The new rates worked very well. Despite I was still flying it freestyle mode, the quad was really smooth. The throttle response on my Protek25 was so much better, I managed to thread the needle coming out of a split S through my shed. Usually, I would have abandoned the attempt as I would panic and be fighting the throttle to keep it from hitting something. For those smooth cinewhoop feel, these rates definitely improved my slow flying. Cheers
Man I really felt like I was being handicapped with my whoop flying. Couldn't figure out how to smooth out my bobbling, which made all my whoop footage look like garbage. I will definitely try this out and see if it helps smooth out my throttle. Thanks much Mads!
@@MadsHalvorsen Heck yeah I did, and man did it help alot. This is the vid of me testing it out and I got rid of alot of my bobble. Now I just have to practice more to smooth out my throttle. Thanks again brother ua-cam.com/video/zUhnu1nvI78/v-deo.html
@@CloodyTube I kinda agree, but at the same time it does a little bit. Not for the flying itself but the consequences of rates. Like, when I was testing out diffrent rates on my Protek, it fell from the sky multiple times because too high rates resulted in D-sync... But for flying characteristics it doesn´t matter like you said!
I would like to use the same rates that you use with your fpv so I can put it on my guitar 25 I can't find the rates that you used I would love to try it so I can fly slow
I normally set shutter locked at double the FPS. So if i shoot in 30fps i set the shutter at 60 etc. But I have the ISO range from 100-800 if the lighting is changing a lot from indoors to outdoors! Shoot any questions if you have any! :D
Hey man! Always love your video but curious about that first flying clip. You mentioned you sped it up a bit , which is fine to get to the point, but then you clearly slowed the footage down but claimed you were flying super slow with a 3.5". I could be wrong, but I am curious about that. It seems you can clearly noticed the slow motion when your turbulence lifted up the leaves and they slowly floated. Everything looks slow motion until you cross the bridge. That looks real time (again you can see the leaves). PS. I am going to try to test these rates out today ☺️. I wonder how they will feel on the 8 blade props.
Applied them to my Protek35 and 25. Will test them later! Always happy to see videos about the Protek35! Although I think it flies great out of the box. Curious to see if you can tune it even better 😉
@DarthFPV can I ask you something off topic, please. It seems that I can't find real measurements of 25 and 35 on internet that is measured from end to end of guards. Would you be so kind and post me measurements of each, please. This is how I can decide which one to buy as I'm looking for one to fly thru gaps, indoor (not much I guess) and outdoor. Regarding the power it all goes to 35, but I'm wondering if there is much difference in size between them.
Thank you very musch Mads...these are the rates im looking for in cinematic slow flying im not a racer...tried it on velocidrone and it was much better that the what i thought was already slow rates for me which is sometimes to jerky and with uncontrollable speed. Thank you.
Nice video, mate! When you fly cinematic indoors which mode do you use? Level, Horizon or Acro? I’m starting in fpv and my goal is work with cinematic specially for real state, both indoor and outdoor. Tks!
By the way i can’t decide about buying an Avata or a CineBot30. What do you recommend? I was about to buy the cinebot, but the full manual altitude control makes me worry and think about Buying the Avata, at least for real state
Stili Mads, been using the stock rates and just get the muscle memory in. gonna Test it when the sun is up again :) have a protek 35 aswell^^ but never tried reelsteady will it work my hero7 and session5? dont realy want to invest in a new gopro since its working just fine.... for now :P
Hi there! It will work for Hero 7 but you won´t get the best results! It´s not worth spending 100$ right now with your camera´s, but if you have some clips you wanna test out Reesteady with, send them to me and i´ll stabilize them for you! :D :D
Hey man, love this video just input the settings now and will try them shortly, it would be great to see a video on how your PIDs mix in with these rates too! Thanks again bud!
Love These rates man thank you If you could make a video aboutBest freestyle rates that would be perfect because nobody else will show we'll show the numbers like you have
Thank you for nice episode Mads, wondering why they still use Air unit instead of Vista. It makes a difference - vista is around 50 g lighter. Did you try to swap the digital set? Nazgul HDcomes with vista but lately they send it with Nebula Pro cam. Looks like the best digital cam (DJI FPV) is over...
Hi there! Thanks for that, appreciate that! I love the Air Units and for me weight isn´t too important! I have some Vista´s but haven´t been testing them so much! :D I wanna test the Nebula Pro cam!
Testing right now, Mads. Indoor with my Cinesplore, but on Emuflight, was not that great for me. Ended up breaking one of those piece of shit ducts so had to stop. Took my Squirt V2 with the new rates on BertaFlight 4.2 outside around the yard and noticed an immediate improvement.
Dude i´m sorry to hear about that Cinesplore quad, damn... But i´m stoked to hear that the Squirt flew better!! Did you use stock rates before testing my rates? 😀
@@MadsHalvorsen My squrt was running was normal free style rates lol which is less expo (.20) and rates about 800. It's allowing me to incorporate a smoother roll and less yaw. Seems to be leveling out very nice in ReelSteady w/horizon lock. I'll upload a clip.
Thank you sooo much! That was exactly the video I was looking for, I just bought a Protek 35 and I will do real estate videos, I want it slow and smooth so I will try out your rates! Thank you very much for sharing! 👍🙏
Yo man, briliant stuff and feel even in simulator, cant wait for spring and testing outside. Do you by the way have the PID tuning protek 35 video somewhere? Was not able to find any, or you waiting for 4.3 to make new pid tunes ?
@Mads Halvorsen! Been following your videos for a while now and you've been putting up some really quality content recently! Thank you so much for this video! I had one question, do you think Hero 9 works just as well with reelsteady as Hero 8 ?
@@MadsHalvorsen thank yo so much for your reply! One last question, hope you see this! What flight times are you getting on the protek with the hero9? I built myself a protek 35 and with the full size hero 9 and a 1500mah 4s I'm getting exactly 3mins of cruising
Hi there! Good observation man! I used . 20 first but then later changes to. 30 , that's why it's different! I liked both but felt smoother with .30 😎 I'll update the screenshot ASAP 🚀
@@MadsHalvorsen Oh didn't know u got 2 versions of protek? :D Whats version are You using in this vid? What do U prefer better? I was thinking of getting 6s but it's out of stock atm.
Hi there! Good observation man! I used . 20 first but then later changes to. 30 , that's why it's different! I liked both but felt smoother with .30 😎 I'll update the screenshot ASAP 🚀
Absolutely amazing. Flying with GepRC Cinelog25 second week, indoor it flies smoothly but outdoor totally unstable even with almost no wind. As a rookie I don't understand what is wrong - is it settings, drone itself, pilot...
The BetaFlight screenshots is a really nice touch! Thanks
I am so happy I found your channel. I just applied these rates to my Eachine AtomRc Seagull ... And it works so much better now! Super stable. Night and day effect. Thanks for the awesome tips!!!
Did you use this on acro or angle mode? I also have the seagull and I want to try these rates. Thanks in advance.
@@dannyt23 I use angle mode to keep it cinematic stable 👍
That's exactly what I was looking for.
I have an Eachine Seagull too and I'm super happy with this cinewhoop.
The drone arrived recently and I made my first real flight just a few days ago, I uploaded a video on my channel.
Can't wait to try these settings !!!
Thank you very much
I was searching for that, thanks for your review !
His settings in Actual Rates are
100 690 .83 pitch and roll
80 550 .82 yaw in the converter BF to actual rates
My recommendations for Actual Rates Center stick 100, max 500, Expo 0.50
Throttle mid = your throttle % at hover (stick %) and throttle expo 0.20
Hi ben laser,do you mean Throttle mid 0.20 and throttle expo 0.20?
It can use for protek25 hd?
@@derrymartalova7785 I was saying set your hover point to middle stick and add a .2 expo in your radios settings. But Do not worry about that. it was bad information. Its all personal preference. I hover around 20%-45% thotttle depending on my weight and battery, I fly fine
more like 120 516 0.7
@@tomaszboril 70% or your stick is 120 degrees per secound and it ramps up to 516 at the last 30% of your stick. That sounds smooth with twitchy end points. but I'll try it on a simulator. It could be the next best thing since sliced bread.
I'm flying 200 500 0.5 for a more consistent stick.
I'm thinking 100 400 0.2 may be enought for my style of cruising and gopro shots. very smooth 100 middle 20% stick with the other 80% of the stick being consistant 400 degrees per secound.
Please could you do a video about PID tunes for the Proteck35 6s
man, been rocking these rates the past year or so... best rates I've come across and use them in all my whoops. liked and subbed !
Dude I appreciate that! How are you? Subbed back of course!
@@MadsHalvorsen thx dude! will look you up on IG too :)
Super fine rates, thank you for sharing! Will try it more indoor showcasing now 😃
Hi, Thanks for sharing. The screenshot is a little different from the description... RC expo in the screenshot is 0.2 while in the description it is 0.3. Thanks again
Wondering the same.
What’s the different between mid throttle and expo throttle in BetaFlight? You use 0,20 in expo but in mid throttle do you use stock BetaFlight 0,50 setting?
Hi! Do you use 1300 or 1500mah batteri on the protek35?
Hi!, ive just aplied them. What about PIDs? Can You show them ? Will it work for cinelog20 the same ?
Do these rates work well on a betafpv Pavo20 with 3S batteries? Do you think those rates are good for acro mode and angle mode?
thank you
would this be okay for a 6S Taycan w/GoPro?
What are your PID rates. Thank you
Hi, how about best rates for pavo pico ?
hello friend I have a proteck 35 and a proteck 25 I made your tuning, man how the drones were in hand I want to thank you in advance, you helped me a lot thank you very much friend
Do you think these rates work well on a Pavo20 with 3s battery?
Hi bro! can you share your pid tune for this? Thank you! 🙂
Thanks for sharing and also the bF screenshot. I didn’t have any idea where rates and expo were!!!😂⚠️
Happy to help out! Did you try the rates yet? :D
Nice job my friend. Expo is where its at, and like I said Actual Rates! Love the video and ill messsge you soon to work on the 7". A+
Thanks man! I really appreciate that! Gonna try actual rates this weekend! :D Looking forward to work on the 7" !
What the rates if this is translate to actual rates?
What would be your advice for the cinelog 30? All the best ✌🏴
This is how I want to be able to fly my Protek35. Thank you for sharing your experience 🌞🙏
Hey there! Some tips for using mini cinewoop with o3 unit? Like flylens85? Thanks for the job! Great explanation and video!😊
Worked a treat. Wondered tho, can I go any slower without the performance being hindered in anyway?
Why is Protek so snappy in the movement? I tried your settings but it was way to snappy for me. Then I lower all the way down to 200 degree on all three. And its still little bit aggresive to me... I want my cinewoop to be as smooth as possible
I use your rates, but I still fly up and down a lot. what do you recommend ? and do you have a description of each rate button in betafly ? Thx u !
I am also not able to control it properly. Have you figured out how to make it fly it in a more controlled way?
I just put the same rates on my tiny go fpv it is wonderful and the house no more hitting walls refrigerator and the doors I love it thank you very much😊😊👍👌
That's awesome to hear! Hope I can see some of your clips soon!
Great tips! What angle did you fly in for this video?
How about Cinelog35, do you have settings for it?
Have you done anything with the tune in PID?
Did you fly in ANGL or HORIZON mode on cinewhoop? or only AIR/ACRO? I'm struggling with this bouncing effect you've mentioned
Hey ! Thank for the vidéo, im gonna try the rates with my cinelog 35 !
Do you fly angle mode or acro for cinematic fly indoor ? And what do you thinkj about taking bad habbits by flying in angle mode ?
Thanks for your answer !
Do u fly acro on cinewhoop or horizon
I believe if your flying in angle mode pitch and roll rates are not in use. Correct me of I'm wrong
Hi have you used throttle curve on the radio?
Thank you I plugged these in and though better I’m still a beginner and can’t get the smoothness down at all :/
I'm excited to try these. I've been having trouble with "slow and low".
Stopping in to say, after many runs, the new rates worked like a dream. Moving from a light camera (50g) to a full-sized GoPro8, the drone became very hard to control smoothly. These new rates brought it back to being totally manageable. Thanks!
Rates is good and that stuff, but I thought that you will show the PID , for this I watched this video.
Great video, do you have air mode off ?
You said you were going to do a Pid Tuning but dont see a vid?
Nice vid. Are you flying in angle mode or acro?
Hi. I have a big problem with flying this drone indoors. He's still swinging him from side to side and it's hard to control. Do you think another drone would be better for indoor flying? It is important for me that he can carry a full gopro 10
Hi there! If you need a smaller setup I would get the GoPro Bones and use it on a 2,5'' drone, I have the Foxeer Foxwhoop 25 and it's amazing for smaller places. Unfortunately GoPro fullsizes are hard to carry with smaller drones...
Thank you so much , my cinebot 30 is now perfect !!
How is it now? Im planning to do the same on my 6s cinebot30?
@@jayrkrishnan still great , much better than the original rates
@@qr9180 Nice. Can you suggest lipos for cinebot30
@@qr9180 is it on Acro mode?
Thanks. Used those rates (after converting to Actual) and they working really nice for me.
how did you convert it? Can you send me the Actual rates?
Great information!! Besides the rates, what do you have your camera angle set at?
Thanks! I fly 10-20 outdoors for cinewhoops and 0-15 indoors depends on how much speed is needed! 5 is actually very nice for the slowest shots
I'll give this a go with my protek25.. It's always been too jumpy and not as precise. But since having it, I haven't had a lot of time to get out and fly the last couple years. Fingers crossed as I get back into the hobby. Also, need to now find rates for smoother freestyle with my protek 35
howd it work for you?
@@griffey11 I haven't been able to try it as it's been a down pour, gale force winds up to 40 mph over the last few days.. It's very close to my rate profile 2, although my RC rates were 1.00, and my Super were 0.70 and my expo was 0.00 and throttle expo was already on 0.20.. I'll give it a go, but just spent 2 days reinstalling all the firmware on my upgrade Mobula6HD and those expo were awful, and I solved this by installing the rates from my Emax Tinyhawk and now it's very smooth. Might see if it works on my protek.
RC rates 0.80.. Super 0.60 and Expo 0.60 and the last one is 0.20.
@@griffey11 So I've updated my rates, but only managed to fly inside. I feel the response is smoother when flying slow and steady, it's definitely different to my original rates. I need to take it outdoors to see how it reacts in an open space? I'll add the rates onto my Protek25 as that one is a jumpy quad. I'm usually flying full speed , freestyle and while I'm no expert, trying to aim for gaps has been me half committed and trying to not make a mess in my trousers as it's just so twitchy on the throttle and pitch and roll axis
@@d.d8-vr926 nice. I put the rates on my defender, gonna try it out tomorrow
@@griffey11 I've got an update.. The new rates worked very well. Despite I was still flying it freestyle mode, the quad was really smooth. The throttle response on my Protek25 was so much better, I managed to thread the needle coming out of a split S through my shed. Usually, I would have abandoned the attempt as I would panic and be fighting the throttle to keep it from hitting something. For those smooth cinewhoop feel, these rates definitely improved my slow flying. Cheers
Man I really felt like I was being handicapped with my whoop flying. Couldn't figure out how to smooth out my bobbling, which made all my whoop footage look like garbage. I will definitely try this out and see if it helps smooth out my throttle. Thanks much Mads!
Dude! Curious, did you try them out? Let me know!
@@MadsHalvorsen Heck yeah I did, and man did it help alot. This is the vid of me testing it out and I got rid of alot of my bobble. Now I just have to practice more to smooth out my throttle. Thanks again brother ua-cam.com/video/zUhnu1nvI78/v-deo.html
Probably a better example of how effective the tune was is this vid. ua-cam.com/video/iJrCNKxASNw/v-deo.html
Thank you very much for the rates, could you share the PIDS too? Thank you! 🙌
What camera angle do you use for this type of flying?
10-25 depends on the speed needed!
Great work!
Do you think these rates would work for Squirt V2 with full hero 9?
Thank you!!!
the rates don't matter from quad to quad
Hi there! Yeah absolutely! My friend that flies a Squirt liked them!
@@CloodyTube I kinda agree, but at the same time it does a little bit. Not for the flying itself but the consequences of rates. Like, when I was testing out diffrent rates on my Protek, it fell from the sky multiple times because too high rates resulted in D-sync... But for flying characteristics it doesn´t matter like you said!
@@MadsHalvorsen great, thank you so much!
@@shadial7808 Let me know if you test them out! :D
Mad, is this a 6S or a 4s version? Would the rate work for both?
I would like to use the same rates that you use with your fpv so I can put it on my guitar 25 I can't find the rates that you used I would love to try it so I can fly slow
MY RATES FOR CINEWHOOPS:
- RC Rate - 0.80 Super Rate 0.69 Rc Expo 0.30
- RC Rate - 0.80 Super Rate 0.69 Rc Expo 0.30
- RC Rate - 0.80 Super Rate 0.55 Rc Expo 0.30
-Throttle Expo 0.20
@@MadsHalvorsen thank you very much 😁
NIce one. I you are flying a cinewhoop outdoor then to indoor what will be ur setting? Will you use ND filter?
I normally set shutter locked at double the FPS. So if i shoot in 30fps i set the shutter at 60 etc. But I have the ISO range from 100-800 if the lighting is changing a lot from indoors to outdoors! Shoot any questions if you have any! :D
Do you used ND filter for outdoor to indoor shots? If u set is min100 and max 800 i assume there will be light shift?
I will try your setting tomorrow,it`s very helpful!!!!thank you bro!!!
Sounds good man! Please let me know how it was!
@@MadsHalvorsen very smooth!!!!!!!!oh my god!!this is best setting!!!!
Hey great video! Gonna be testing out these rates on a cinewhoop build. I’m really interested in that PID tuning video, waiting for it to drop
Coming soon!
U could scale the throttle it helps alot
Absolutely!
Is it a 6s or a 4s version ? What do you think about the 6s version for indoor flights ? Thanks a lot
could you give me best PID rates for reptile cloud 169 HD?
Hey man! Always love your video but curious about that first flying clip. You mentioned you sped it up a bit , which is fine to get to the point, but then you clearly slowed the footage down but claimed you were flying super slow with a 3.5". I could be wrong, but I am curious about that. It seems you can clearly noticed the slow motion when your turbulence lifted up the leaves and they slowly floated. Everything looks slow motion until you cross the bridge. That looks real time (again you can see the leaves). PS. I am going to try to test these rates out today ☺️. I wonder how they will feel on the 8 blade props.
Applied them to my Protek35 and 25. Will test them later! Always happy to see videos about the Protek35! Although I think it flies great out of the box. Curious to see if you can tune it even better 😉
Hi there! Stoked to hear from you, let me know!! And yes, it flies GREAT out of the box, but there is always room for some minor improvements! :D
@DarthFPV can I ask you something off topic, please. It seems that I can't find real measurements of 25 and 35 on internet that is measured from end to end of guards. Would you be so kind and post me measurements of each, please. This is how I can decide which one to buy as I'm looking for one to fly thru gaps, indoor (not much I guess) and outdoor. Regarding the power it all goes to 35, but I'm wondering if there is much difference in size between them.
@@janezhitori6203 protek25: from left to right = 16cm and diagonal = 18cm. Protek35 from left to right = 21cm and diagonal = 24cm
@@StijnDeGrauwePhoto I love you man! You just convinced me that 35 isn't that big after all 😀
what weight are those drones, if you don't mind me asking? i'm wondering if this will be ok for my 6s Taycan with GoPro10
Really helpful video. Thanks. Will experiment with these rates when I get my Protek35 later this year
Thanks man! Appreciate that! Let me know how it goes! :D
Thank you very musch Mads...these are the rates im looking for in cinematic slow flying im not a racer...tried it on velocidrone and it was much better that the what i thought was already slow rates for me which is sometimes to jerky and with uncontrollable speed. Thank you.
Nice video, mate! When you fly cinematic indoors which mode do you use? Level, Horizon or Acro? I’m starting in fpv and my goal is work with cinematic specially for real state, both indoor and outdoor. Tks!
By the way i can’t decide about buying an Avata or a CineBot30. What do you recommend? I was about to buy the cinebot, but the full manual altitude control makes me worry and think about Buying the Avata, at least for real state
@@marceloweyll Cinebot30! DJI Avata is like a toy.
@@and3fpv thank you, Mads! 🚀🤝🏼
This was so helpful! i have a question, this rates works fine with a bumblebee v2? 4S and without go pro, just thinking about the weight.
Stili Mads, been using the stock rates and just get the muscle memory in. gonna Test it when the sun is up again :) have a protek 35 aswell^^ but never tried reelsteady will it work my hero7 and session5? dont realy want to invest in a new gopro since its working just fine.... for now :P
Hi there! It will work for Hero 7 but you won´t get the best results! It´s not worth spending 100$ right now with your camera´s, but if you have some clips you wanna test out Reesteady with, send them to me and i´ll stabilize them for you! :D :D
Woow great ... i dont know how to set rate ...
are these the same for your indoors? will give them a try today, i have 3 protek35s, love em
Yup! How did the rates turn out? :D
@@MadsHalvorsen AMAZING
Hey man, love this video just input the settings now and will try them shortly, it would be great to see a video on how your PIDs mix in with these rates too!
Thanks again bud!
Thanks a lot man! Appreciate that! PID video coming up!
Love These rates man thank you
If you could make a video aboutBest freestyle rates that would be perfect because nobody else will show we'll show the numbers like you have
try this ua-cam.com/video/jxtYZxwkt-E/v-deo.html
You got a new sub!
Welcome! Thanks!
Great video I absolutely love my protek35 will give these rates a go when the rain in England finally stops 😩🤣👍
Just wondering if you were able to setup rom filtering for it? Mine flew like trash out of the box and a motor burned out in under 10 flights
Thanks man this will help me A LOT !
Glad to hear that! Good luck!
Thank you for nice episode Mads, wondering why they still use Air unit instead of Vista. It makes a difference - vista is around 50 g lighter. Did you try to swap the digital set? Nazgul HDcomes with vista but lately they send it with Nebula Pro cam.
Looks like the best digital cam (DJI FPV) is over...
Hi there! Thanks for that, appreciate that! I love the Air Units and for me weight isn´t too important! I have some Vista´s but haven´t been testing them so much! :D I wanna test the Nebula Pro cam!
Testing right now, Mads. Indoor with my Cinesplore, but on Emuflight, was not that great for me. Ended up breaking one of those piece of shit ducts so had to stop. Took my Squirt V2 with the new rates on BertaFlight 4.2 outside around the yard and noticed an immediate improvement.
Dude i´m sorry to hear about that Cinesplore quad, damn... But i´m stoked to hear that the Squirt flew better!! Did you use stock rates before testing my rates? 😀
@@MadsHalvorsen My squrt was running was normal free style rates lol which is less expo (.20) and rates about 800. It's allowing me to incorporate a smoother roll and less yaw. Seems to be leveling out very nice in ReelSteady w/horizon lock. I'll upload a clip.
@@rhodesplayer Dude I would love to see that! Awesome man!
Thank you sooo much! That was exactly the video I was looking for, I just bought a Protek 35 and I will do real estate videos, I want it slow and smooth so I will try out your rates! Thank you very much for sharing! 👍🙏
I appreciate that! A lot more reel estate content coming up!!
with witch mode are you flying indoor? Acro?
@@MadsHalvorsen are you flying acro indoor?
@@thevisualtravelguide9722 yes acro. Its way more easier imo to fly in acro
Yo man, briliant stuff and feel even in simulator, cant wait for spring and testing outside.
Do you by the way have the PID tuning protek 35 video somewhere? Was not able to find any, or you waiting for 4.3 to make new pid tunes ?
Should they be betaflight rates (older rates) or actual rates (4.2) ?
Old rates! :D
I don't see the rates anywhere???
MY RATES FOR CINEWHOOPS:
- RC Rate - 0.80 Super Rate 0.69 Rc Expo 0.30
- RC Rate - 0.80 Super Rate 0.69 Rc Expo 0.30
- RC Rate - 0.80 Super Rate 0.55 Rc Expo 0.30
-Throttle Expo 0.20
Thank you it's very helpfull
I appreciate that! Let me know if you get to test them out!!
@@MadsHalvorsen ok I will
Sounds good, maybe i will try it 😉thanks for this tip 👍
Hi man! Thanks for the comment! Hope you try it :D
@Mads Halvorsen!
Been following your videos for a while now and you've been putting up some really quality content recently!
Thank you so much for this video!
I had one question, do you think Hero 9 works just as well with reelsteady as Hero 8 ?
Thanks man! Appreciate that! Yeah, I honestly think the Hero 9 works just as good as the 8 for Reelsteady! A bit heavier but I don´t mind
@@MadsHalvorsen thank yo so much for your reply!
One last question, hope you see this!
What flight times are you getting on the protek with the hero9?
I built myself a protek 35 and with the full size hero 9 and a 1500mah 4s I'm getting exactly 3mins of cruising
Muchas Gracias amigo!!!
Flow rates❤️
Hope you are willing to try them out! Think you are going to like them!!
@@MadsHalvorsen yes if i could change them🤣 got no micro usb on my fc
@@Settemsdal do it through OSD DJI or analogue
@@rronrec8052 ye, havent changed the rates in the osd to much😅il check it out thank you
Or betaflight lua script
looks so cool!
smooth as butter now...throttle expo 🤌
Is it a 6' or 4' drone ?
??
It's a Iflight Protek35 the props are 3.5in. or 89mm. If that is what you are asking?
@@davidkereluk1805 asking if it was 4s or 6s drone
Hey you should do I video with your freestyle rates too!
Will do! :D
Super super good.
RC Expo 0.20 like in description or 0.30 like on screenshot ?
Hi there! Good observation man! I used . 20 first but then later changes to. 30 , that's why it's different! I liked both but felt smoother with .30 😎 I'll update the screenshot ASAP 🚀
@@MadsHalvorsen OK it's Easter so ASAP can wait
Those rates are for 4s or 6s version?
I fly them on both 4S & 6S! :D
@@MadsHalvorsen Oh didn't know u got 2 versions of protek? :D Whats version are You using in this vid? What do U prefer better? I was thinking of getting 6s but it's out of stock atm.
Share your pids tune. Please
Thanks.
You're welcome!
Good info but you need to sort your lighting out. Everything underexposed
Hey so on the description it says .30 for the rc expo but your screenshot shows .20 so just curious on which one it is!
Hi there! Good observation man! I used . 20 first but then later changes to. 30 , that's why it's different! I liked both but felt smoother with .30 😎 I'll update the screenshot ASAP 🚀
Rates are great an all but the real hero is Realsteady.
ok but ProTek35 or CineLog35
i think you have to say that you use your thumbs. for me this rates are to slow for hybrid grip. so there are no best rates for everybody :)
Day 1 of asking for PID tunes video
Top thanks you
Anytime! :D